937 ramjet engine

Body 937 ramjet engine

Next chapter

(19/100 for ERS)

The five-axis CNC machining center was a must-have equipment for the Soviets.

Otherwise, in the space race with the United States, the Soviet Union, which did not have enough funds and insufficient technological strength, would have completely failed.

Although, the Soviet side also believed that the Americans were likely to deceive them, and would rather believe that they existed, moreover, the earth was too small, and there was not much room for development in the Soviet Union, and the Soviets had to step to the moon and then conquer the universe!

Just these six five-axis CNC machining centers were able to save a huge amount of money for the Soviet space program! It can completely replace six special machine production lines! Even the machining of other difficult parts of the Soviet Union for missiles and aerospace could be done with top-of-the-line equipment such as guò.

The Soviets had apparently realized that in terms of the mode of production, their special line of special planes was simply insufficient in this regard.

In particular, the upgrading is very fast, and large-scale tests are required, and the manufacture of high-precision and sophisticated weapons and equipment that has not yet been finalized has not yet been finalized.

The five-axis CNC machining center from Japan made them deeply realize the benefits of this automatic machine tool. Now they can get more from the Chinese, so that many of their new products can reduce the cost of R&D and production lines.

"There is not much technical difference between the Tu-22M1 and the Tu-22M2, and we can guarantee that whether it is supersonic penetration or combat radius, we can guarantee that both the supersonic penetration and the combat radius are ......"

"Isn't the combat radius of that thing just over 1,700 kilometers when fully loaded? General, even with the addition of wet nurses to replenish fuel, do you think that across the Pacific Ocean, how many air nurses do we need to refuel a bomber? The Anglo-Afghan war had already sued us, and the British Vulcan was in order to bomb Argentina. Two Vulcans with a large group, 11 Victory air tankers refueled, however. In the end, what else can be done but blow up a few air runways? Or. You provide us with this kind of fighter just so that we can run to the territory of US imperialism and drop mushroom bombs? Liu Yijiu said coldly.

"The range of the Tu-22M1 reached 7000 km! Nearly twice as tall as Vulcan! At the same time, the maximum bomb load can reach 24 tons, which is far from the ...... that the British backward bombers and modified tankers can compare"

Lie Rige felt that Liu Yijiu's head was caught by the door.

Compared with M2, the technical performance of the Tu-22M1 is not improved!

"We're across the Pacific, farther away from the continental United States!" Liu Yijiu still did not loosen. "All we need is m2!"

"If we agree to exchange the M1, we can agree to let you drive the fighter back first, let you test the range, and then we can get these CNC machining centers and chip ...... that belong to us."

"All we need is m2reads;!" Liu Yijiu still insisted.

"We can only provide M1, M2 is all arranged in various strategic locations, and it is simply impossible to ......" at this time. The scorching sun made his attitude clear.

It was impossible for the Soviet top brass to agree to give the Chinese Tu-22M2, since each of these strategic bombers was arranged.

Only the Tu-22M1.

"Now you're telling me this? The transaction is voided. We don't cooperate with people who are not sincere......" Liu Yijiu looked disdainful.

Isn't that a reason to give yourself a price increase?

Looking at Lie Rige's painful reaction, Liu Yijiu was thinking about how much it was appropriate to increase the price at this time, if you want to get the Soviets' things faster, you can only get them in Komsomolsk in the Far East, and the Su-27 over there must not be counted on, what else is there?

"If you just remove the aerial refueling device, your country will start producing the M2 after only a dozen or so aircraft? Although our intelligence system is not developed enough and there is not enough information, we are still for these things. Or understand the ......"

"What the hell are you going to do to close the deal?"

"It's not about how I'm going to complete the deal, it's that you're not sincere in the first place, if you sue us for M1 at the beginning. Do you think we'll just agree to sign a contract like that? General, I know that you have mobilized at least three divisions of troops on the opposite side, if you want to use a forcible robbery method, you can try it......" Liu Yijiu said coldly, seeing Leonid's reaction, he immediately turned his head coldly and said to the people around him, "Go and tell Division Commander Sù Wen that once the Soviet army on the opposite side makes a move, blow up all the equipment and chips." To ensure safety, plant bombs on all the equipment......"

The people around Liu Yijiu went to arrange it instead.

Seeing the Chinese side is not a joke at all. Lie Rige suddenly became anxious.

"Liu, what are you going to do to continue trading? We can add something to exchange......"

"Add what? A companion air tanker? Liu Yijiu asked greedily.

Rige heard this. The corners of his mouth twitched, this product is obviously to raise the price! Rather than really trying to blow up these CNC machine tools, which are also not easy for China to obtain.

Japan has made a great contribution to China's reform and opening up, and the Soviet intelligence department has analyzed that it is very likely that it is because Japan did not pay the slightest compensation for its invasion of China, which was some compensation made after secret consultations between the two governments.

No matter how strong the Chinese's technology is, it is impossible to get the production technology of the five-axis machining center, but the production technology of the three-axis machining center is very possible.

The Soviet Union had no way to come up with advanced CNC machine tools, so how could China come up with the production technology of a five-axis machining center?

As they suspected, the biggest possibility is that they came from Japan, and China probably won't get too much from Japan.

"The same way to increase the combat radius, how about giving you a cruise missile production technology? But the production technology of this cruise missile is obviously much higher than what you offer, so you also need to increase the price......" Lieri Ge measured the final hole cards.

Cruise missiles, this is a technology that the whole world is working on.

Liu Yijiu did not expect that the Soviets would give such a price.

“x-22?” Didn't the USSR disagree?

"No, it's another one, it's just that we haven't studied it, and the technology of this missile is not very mature......"

Liu Yijiu's original joy suddenly vanished, obviously the other party gave the cruise missile reads that had not been successfully researched. The range will not be too high.

"We don't have the technology to succeed, and we don't even have a finished product, General, do you think we're stupid?" Liu Yijiu was immediately dissatisfied.

"No, this cruise missile is not much different from the X-22, especially in terms of anti-ship capabilities...... can reach a speed of Mach 4 to 5, because of financial problems, so it was stopped when it was just successfully developed......" Lie Rige's words made Liu Yijiu interested.

What kind of anti-sky missile of the Soviet Union was dismounted because it was not much different from the X-22?

Especially at speeds of more than Mach four.

No matter how hard he racked his brain, he couldn't come up with an answer.

"There is a new type of engine, equipped with this kind of missile, and the technology is not mature, that is, because of the technology of this engine. Even without this engine technology, it is possible to allow the missile to reach Mach 3 ......"

These words immediately made Liu Yijiu's heart beat wildly!

Ramjet engine!

It should not be that the technology is immature, but that the other party will not give this top-level rocket engine technology to China at all.

Listening to the other side's meaning, it is to provide some basic technology to the Chinese side.

With this technology, it is completely possible to make a cruise missile with a faster speed!

In conjunction with the double three project being studied, it is completely a kind of anti-heaven storage.

"Ramjet engine technology to us, deal!"

"We have not succeeded in researching this engine technology, but it is theoretically possible to achieve this kind of process. Moreover, the Soviet military believes that this missile does not meet our requirements for use, especially after it needs to exceed the base speed of Mach 3 before it can be successfully ignited......" Lierige did not expect that Liu Yijiu actually knew about the ramjet engine.

At this time, he even regretted a little that he proposed this kind of technology that Soviet research encountered layers of difficulties to the vampire-like kid in front of him.

A ramjet engine, the full name of ramjet engine, is an air jet engine with a very simple structure, can emit a lot of thrust, and is suitable for high-altitude and high-speed flight.

This is the top engine that mankind has worked hard to study after entering the 21st century, in Liu Yijiu's era, fighters are basically using ramjet engines, because this kind of engine has good economic performance, especially after the research of ion ramjet engines, the role of fighters is more prominent!

In the upper layers of the Earth's atmosphere, due to the action of the sun and cosmic rays, part of the air is broken down into ions, and when these ions are recombined into molecules, a large amount of energy is released, so it is possible to inject a small amount of catalyst into the engine to recombine the ions into molecules, and release energy to propel the aircraft, so that there is no need to carry fuel at all.

Of course, this is very technically demanding, and now in the world, even the United States and the USSR cannot do this!

To reach or even exceed the tenfold factor, the material alone is completely capable of stopping all countries!

Because, when flying at this ultra-high speed, the high temperature generated by the friction between the engine wall and the air will reach 1000C, and the temperature inside the engine combustion chamber is as high as 2500-2800C. Materials that can withstand such high temperatures, and only pure tungsten and molybdenum are currently used on the earth.

These materials have a high enough melting point and very good resistance to high temperatures, but they have a headache that cannot be solved - the density of the materials is too high, more than twice that of ordinary steel!

(To be continued.) )

For mobile phone users, please visit wènhttp://mnet

http://mnet