766 The money given out is earned back with CNC machines

(For @ Wind and Sand, ruthless, greatly added)

For CNC machine tools, China's demand is the largest.

In the past, China's industrial system was inherited from the Soviet Union, and it has always adopted the Soviet Union's special aircraft production model, but after decades of industrial development and the current conditions of peaceful development, the equipment is no longer the large-scale mechanized cluster that used to be.

Therefore, the production of special planes and special lines in the past is obviously no longer able to keep up with the form of preparing to reduce armaments, reduce the number of soldiers, and improve the combat effectiveness of the troops.

Although the efficiency of special machine and special line production is high, it requires a longer production cycle for the production of experimental products with small batches, and at the same time, it also requires more expensive production costs, which is very unfavorable for model improvement and so on.

Once a certain equipment is modified, the entire huge production line is scrapped.

The development of the West is CNC machine tools with more outstanding processing capabilities. From this point on, the Soviet Union and the Western camp began to change. And it was also like this, the Soviet Union was finally dragged down by the United States in a fierce arms race.

China does not have a large economic base like the Soviet Union, nor does it have a strong industrial base like the Soviet Union.

The whole country, also because of armaments, almost collapsed.

Therefore, now we are beginning to vigorously develop CNC equipment that is more suitable for production in the new era, can adapt to single-piece small batch production, rapid product upgrading, and no waste.

At present, only the Nine Institutes in China have this kind of technology, and they have the most core production technology. The advanced chips required by the CNC system are only owned by the Ninth Academy.

Badly, for the sake of Forex. A large part of the CNC machine tools produced in China were secretly supplied to the Soviet Union, transported from the southwest to the northeast, and then transferred from the northeast to Russia, and finally operated to various military industrial units of the Soviet Union through the Trans-Siberian Railway.

If the number in the country is small, naturally the distribution will not be even.

002 such a base, in the current situation. It is also very normal to not be able to get these advanced production equipment.

This provided Liu Yijiu with the opportunity to earn back a part of the profits of the 8208 project that was distributed to the 002 base.

"Old Xue, go on like this. On your side of production, it is difficult to guarantee that we will be able to complete the delivery task in half a year! Liu Yijiu saw that those workers were carefully operating CNC machine tools, and they were all parts that were not too high, and said with a worried face.

Xue Lanqi also thinks so. "There is no way. Productivity can only be dispatched from other production workshops and units. Director Liu, rest assured, we will not delay the delivery date. ”

The products of the Ninth Academy have high delivery requirements, which is something that the whole country knows, and even they put forward requirements for management.

Quality problems are never allowed to be found in the products delivered to them.

"If we can buy a batch of CNC lathes with a rotary diameter of 800 or 630 mm, the processing problem will not be too big. Otherwise. It's a bit difficult to guarantee such a large amount of processing......"

Production of ordinary machine tools. It is completely ensured by the experience of the operation technician.

Although there is a coating on the outside, the higher the accuracy, the more it can ensure the stability of the missile's attitude during the flight, and during the flight, even if it is a little change, at the target landing point of the ballistic missile, it may be tens of meters or even hundreds of meters.

The accuracy of Dongfeng-3 at the beginning, the circumferential error reached 1000 meters to 3000 meters, which was because of the problem of machining accuracy.

The accuracy of each piece is different.

Moreover, the error is also different, the accuracy can reach 1000 meters of circumferential error, but the accuracy is not good, it will reach the range of 3000 meters!

This is a range of precision that makes people speechless, for Liu Yijiu.

In the future, with the Beidou system and more sophisticated manufacturing equipment, the missile's hit accuracy can reach 0. Within 1 meter!

The military industrial system, for the highest technical requirements are aircraft, missiles, large warships, each of which has very high requirements for processing technology.

"I have it over there, do you want it?" Liu Yijiu asked casually with the expression of "I think about you" and "I think about our project".

"How many?" Xue Lanqi just wanted to find an opportunity to increase his relationship with Liu Yijiu.

"If you want as much as you want, we can supply you with a batch first, as long as Hongshan Machinery Factory has it, we can provide it." However, the overall number cannot exceed 100 units, within half a year, only 50 units can be delivered, and only 5 units of the four-axis can be given to you within a year! Liu Yijiu immediately patted his chest and promised.

This immediately made Xue Lanqi happy.

Seeing that the other party was happy, Liu Yijiu put forward the condition again, "Lao Xue, there are many people on your side, and many of them are not used in key places." Since we want to cooperate for a long time, why don't you lend me some more people? ”

Hearing this, Xue Lanqi suddenly had 100,000 tanks run over in his heart.

Liu Yijiu's benefits are really not so easy to take.

I was on guard at the beginning, but I didn't expect it to be his way!

But looking at this posture now, it seems that if you don't give Liu Yijiu people, it is not possible to get CNC machine tools from them in advance. It may even affect the profit distribution of the 8208 project.

"Director Liu, the young talents on our side have been almost stretched by you......" immediately said to Liu Yijiu with a bitter face.

"We only borrowed forty or fifty people from you, how could it be clean? Over the years, you have been replenished, but we have not had fresh blood for many years, and tens of thousands of people are so stingy......"

Liu Yijiu pouted and said.

Next to it is the CNC machine tool, the material transfer cart is full of arm-thick aluminum alloy parts, Xue Lanqi, who heard this, couldn't wait to grab an aluminum alloy part to knock Liu Yijiu to death, and then use the Dongfeng-5 produced by the 002 base to launch Liu Yijiu into outer space, and then he would no longer have to do these dirty things.

You must know that Liu Yijiu said that there are tens of thousands of people in the 002 base, and most of them are ordinary workers and skilled workers with their families!

Liu Yijiu wanted a researcher, and he was the kind of backbone.

"Okay, Director Liu, I don't know how many people you want, what are they?" In the end, Xue Lanqi still didn't smash Liu Yijiu.

"We don't want much, sell 100 CNC machine tools to you, deliver it in two years, just give us 52 people, this is the list ......" Liu Yijiu gestured, and Li Rui took out a printed list from the bag in her hand and gave it to the other party.

"****!" Seeing the list above, Xue Lanqi could only scold helplessly!

On the list, all of them are young backbones in computers, radios, materials, electronics, etc., and even when those people entered the 002 base, there were job transfers.

"These people, although they are all backbones, are not the top backbones. We didn't dig up your most core people, did we? Anyway, if you stay here, you're doing some unimportant work, and you're thinking about transferring all day long, so it's better to leave it to us. ”

Liu Yijiu's people have long understood the talents of aerospace.

Originally prepared to threaten them with the 8208 project, now they can use CNC machines, even better.

“……”

In the end, Xue Lanqi said that he had to hold a meeting with the party committee and the management committee of the base to make a decision, and Liu Yijiu gave up.

He knew that the other party would give it to this group of people.

Perhaps, more will be given.

Seeing that the sky outside was dark, he asked the technical team that was discussing, and he was still in full swing, so he directly pulled Liu Yijiu and other management personnel into the small canteen of the 002 base.

What Liu Yijiu did in the 701 Institute has already been reported, and Xue Lanqi doesn't care whether Liu Yijiu is pretending to be honest outside, and it doesn't exceed the standard, but it is to let the canteen clean up the millet and other wild things that are becoming more and more difficult to achieve.

These are all done by the workers in the base, and if they can't finish eating, they will be sold to the canteen to supply the base's higher-ups.

After three rounds of wine and five flavors of food, when it comes to the treatment of different units within the aerospace industry, it is a big head.

Liu Yijiu is most annoyed by listening to these things, he is because he knows, so he tried to make the Ninth Academy jump out of the system from the beginning, and has the right to independently establish projects and operate independently, so as to avoid those bullshit things.

Otherwise, how could they have achieved so much so quickly.

Not to mention anything else, just what he knows, the active phased array radar on the 052 ship, just a technical demonstration, took five years! Among them, it is because of the support of the big guys above.

At the beginning, the S-band active phased array radar of the 14th Institute was almost cut, but the C-band phased array radar scheme of the 23rd Institute of the Second Academy of Aerospace Systems was adopted, and the result was to prove that the S-band is more effective than the C-band, and the 4-unit T/R component has been developed, and there is a physical display project, which has been demonstrated for such a long time.

In the end, he had to borrow a drunk and left.

That night, the technicians did not return to the base, Liu Yijiu and others went directly back to the base of the Ninth Academy, and after telling Xie Heping about the provision of CNC machine tools to the 002 base, they went to the capital.

Now I'm busy, and I basically sleep on the road.

After returning from the Middle East, Liu Yijiu was not able to get a good night's sleep.

With so many projects in the Ninth Academy, he didn't even have time to stop and listen to the progress report.

When he went to the capital this time, Liu Yijiu's main purpose was to discuss with Qian Lao about borrowing some people. The Ninth Academy wants to engage in a large-scale missile project, and it is also a tactical missile, which is recommended by Qian Lao, which is definitely not comparable to ordinary people.

"You'd better do your own projects, and be ambitious all day long!" When Qian Lao heard that Liu Yijiu wanted someone from the missile side, he immediately frowned and scolded Liu Yijiu.

(To be continued.) )