"Want a full set of production technology for CNC machine tools? Including computer chip manufacturing technology and CNC machine tool automatic control technology and other related technical data? Liu Yijiu and the Soviets are also old acquaintances, although they have not been dealing with each other for a long time, but they are deeply impressed by each other.

For the top of the Soviet Union, this young man had long been familiar with them.

Therefore, after the time for the negotiation was determined, the two sides sat together without any delay, and went directly to the topic.

Such negotiations are uncommon in the entire world.

However, in the face of the Soviets' request for CNC machine tool manufacturing technology as soon as they came up, Liu Yijiu was still a little surprised.

Lierig personally participated in the negotiations, and the Soviet side wanted to set the venue for the negotiations in Ulaanbaatar, but the Chinese side did not agree, and a few years ago, KGB spies had come to China to kidnap Liu Yijiu, and they almost succeeded.

At present, if Liu Yijiu runs away to the territory of the Soviet Union, it will naturally be impossible.

After discussions, in the end, after a short period of consultations, the venue of the negotiations between the two sides was placed in Kalamamay, which belonged to the Northwest Theater of China, and a large number of military forces were deployed between the Soviet Union and the Soviet Union.

In this negotiation, in order to ensure the safety of Liu Yijiu and the delegation, the entire Northwest Theater maintained a high degree of tension, even so, the Ninth Academy still chose a large number of dragon tooth special forces to ensure Liu Yijiu's safety, and at the same time, it also mobilized a part of the black guards to reach the border between Kazakhstan and China.

If the Soviet special forces can snatch Liu Yijiu from the dragon's tooth and the Black Guard, the Black Guard in Kazakhstan will intercept and snatch Liu Yijiu back.

On the surface, it was a very simple negotiation, but in private, the two sides maintained a high degree of force mobilization, and the top special forces and the top armed forces were ready......

Liu Yijiu knew this, and he opposed the negotiations on the Sino-Soviet border, but he had to take risks. If the Soviets really had an idea, then ......

Now that it is up to the manufacturing technology of CNC machine tools, Liu Yijiu understands very well that the Soviets have understood the benefits of CNC machine tools. In the past few years, it has been delivered to the Soviet Union in a controlled quantity, which still has great benefits.

Can you give this?

Hearing the other party's request, Liu Yijiu immediately shook his head firmly, "General Lierige." Even if we give you a full set of production technology, do you think your country will be able to copy our CNC machine tools? ”

At this point, it is not that Liu Yijiu looks down on the Soviet Union, but that the Soviet Union has not had enough time.

He didn't want the USSR to leave the legacy of CNC machine tools to Lao Maozi!

"This is our business, Director Liu, since you asked us to give you the most advanced R-77 active radar-guided medium-range air-to-air missile, you also have to exchange technology! Not only CNC machine tools, but also your electronic chip manufacturing technology......" Teslafu said to Liu Yijiu with an expression on his face that you had taken a big advantage.

Even Lie Rige is a matter of course. "What is the purpose of this missile from us? It's to defend against our USSR! Attacking our air force with our missiles, in the whole world, it is estimated that only you can come up with it......"

These words made the Soviets laugh.

However, the Chinese who sat down again did not laugh.

Since the Soviets are willing to exchange technology for technology, it is likely that they simply do not care that the Chinese get this missile.

Or, the technology of this missile has serious flaws, and the Soviets are sure that the Chinese side will not be able to surpass them. Either that, the Soviets had the means to effectively defend against such missiles, and at the same time, they had higher countermeasures.

"Can it be produced. This is our business, the industrial manufacturing technology of the USSR, it is estimated that there are not many countries in the whole world that are stronger than us......"

"That's true, but we can't agree to trade one missile technology for our CNC machine building technology. We are all people who understand, not to mention anything else, just electronic chips. The value of this technology far exceeds the value of missiles. Only when the productive forces are advanced can we have more advanced and powerful weapons and equipment......" Liu Yijiu insisted that it was absolutely impossible.

The negotiations between the two sides reached an impasse at the outset.

The Americans could go to China at any time, and they had to reach an agreement with the Soviet Union to get from them the technology for manufacturing medium-range air-to-air missiles, otherwise these things would be in vain!

Johnson also participated in the secret negotiations, negotiations with the Soviets, and he felt that he should be able to learn a lot from them.

Seeing that the negotiations had just begun and fell into a situation where they could not be carried out, he immediately put forward his own proposal, "Or, let's not trade technology, and directly exchange CNC machine tools for the finished products of R-77 missiles, if possible, small general-purpose five-axis CNC machine tools can also provide part of the ......."

Small five-axis universal CNC machines, this is what the Soviets lacked the most.

These CNC machine tools can effectively reduce the cost of product research and development, which is much cheaper than the special line production model of the Soviet Union, which is one of the conditions for the finale negotiation.

Without technology, as long as it is possible to obtain samples of the R-77 missile, which has been studied domestically for several years, the AIM-54 missile will be able to make a breakthrough in a short time. In particular, at present, Liu Yijiu believes that the performance of the R-77 is not advanced enough, although it is said that this missile will not be left alone after launch, but the hit rate is too low, and the fighter can make super maneuverable maneuvers to dodge, and even the speed can exceed the speed of the missile, and it can also launch decoy bombs to lure the missile to hit the target and be detonated, if it is not improved, it is absolutely impossible to equip the troops on a large scale.

Even if it is used to hit the target, the effect will not be too good.

"Five-axis CNC machine?" Lieri Ge heard this, immediately a little excited, five-axis CNC machine tools belong to the international absolute embargo of products, the Japanese have now broken off the trade with the Soviet Union for high-grade CNC machine tools, which is a very huge loss for the Soviet Union, European five-axis CNC machining center production of each is strictly registered.

If you want to reduce R&D costs, you must have a large number of five-axis CNC machine tools!

In the Soviet Union, the number of five-axis machining centers is now very small.

The source was simply not found.

The entire Warsaw Pact, and even the former China, took the same path as the Soviet Union's special aircraft production model, developing a product, and the production line of production and manufacturing had to be made at the beginning, and once the product structure changed, the entire line was scrapped; The route taken by the West and NATO is the manufacturing mode of CNC machine tools, which can effectively improve production efficiency and reduce costs in single-room small-batch production, and at the same time has the role of maintaining high efficiency and high precision in mass manufacturing and reducing scrapping......

The poor financial environment, the aggressive posture of NATO, and the enormous pressure on defense forced all departments of the Soviet Union to think about reducing costs.

As a result, the five-axis CNC machine tool became an opportunity for the Soviets to improve efficiency and reduce costs.

In the whole world, only the Federal Republic of Germany, Japan, and the United States can manufacture high-precision five-axis CNC machining centers.

The Chinese brought this up, but they really couldn't think of it.

"Yes, the five-axis CNC machining center can provide at least 50 units per year!" Liu Yijiu said with a relaxed face.

"We want to produce manufacturing technology!" Lie Rige immediately put forward the request for non-division again.

Seeing this guy's expression, Liu Yijiu couldn't help but pout, "General, do you think that the production technology of five-axis CNC machining centers is as common as cabbage in our Chinese market?" ”

"We can exchange ...... with X-22 cruise missiles"

"We are not interested in cruise missiles, because, although our Navy is poor, the threat from the sea is not very great. The huge warships of the United States are not a threat to us......" Liu Yijiu's heart was extremely excited, however, he did not show it at all. "We just need to be able to secure our air supremacy......"

Just throwing out the five-axis CNC machining center made the Soviets so excited, and Liu Yijiu already had a certain understanding of the bottom line of the Soviets.

However, manufacturing technology is absolutely not givable.

A large number of CNC machine tools sold to Lao Maozi every year are a good opportunity for China to earn foreign exchange through exports.

At the same time, for the export of CNC machine tools, technicians need to go to the Soviet Union to assist in installation and training, so naturally there will be more opportunities to contact some engineers in various secret units of the Soviet Union......

"Liu, you're not right to think like this. Reagan's bastard and Elizabeth's slut both openly declared that they wanted to exterminate **, ******** different, they are our enemies! Osipov frowned and looked at Liu Yijiu, this grandson, he doesn't sell five-axis CNC machines in his hands! In particular, the Soviet Union's request to increase the supply of three-axis CNC machine tools and four-axis CNC machine tools was also rudely rejected by him......

"We are a socialist country, and we are still in the initial stage of socialism, and our big boss has explained this several years ago, and our country's task now is not to engage in hostility with anyone, nor to form an alliance with anyone, but to develop our economy, solve the problem of food and clothing for our people, and build a moderately prosperous society in an all......-round way." Liu Yijiu explained to the Soviets very sternly China's explanation of the problem of the state system and the country's current development strategy.

(To be continued.) )