And only less than 500 meters behind Lei Keming, a face was covered by thick oil paint, and the whole person was also hidden by a camouflage net that blended with the environment, and the sniper lying in a bush was calmly pulling the bolt of the SVD sniper rifle transformed into a manual in his hand to withdraw the cartridge case, and continued to shoot in the direction of Lei Keming.

At the moment when Lei Keming's butt touched the ground, he grabbed the gun with one hand and propped up the ground with the other, and the whole person seemed to have a spring installed under his buttocks, and his body moved towards the back of the tree in a twisted attitude.

"Two snipers!"

The two snipers identified by the other party are both in this direction!

As soon as he hid behind the tree, another bullet flew past the edge of the tree, as long as he slowed down even 0.1 seconds, it is estimated that Lei Keming will have to explain here.

The hot pain on his scalp made Lei Keming more and more calm.

"Three o'clock!"

Erkui's voice came from the headset.

Lei Keming immediately leaned against the trunk of the tree and set up the sniper rifle in his hand, biting his lower lip with his upper teeth, searching into the distance.

In the forest environment, the role of the sniper rifle is greatly limited, and there are obscurations everywhere, however, the fact is that the sniper does not lose his duty and give up the opportunity to snipe his opponent because there are too many obscurations.

When he was at the target in the bushes that was almost integrated with the environment and would be missed if he didn't pay attention, Lei Keming smiled coldly, stuck out his tongue to feel the wind, and then silently calculated the distance between the two sides in his mind, and finally, aimed at the target, pulled the trigger heavily, and then continued to set off on the mountain bag.

One shot to the head!

The war is still going on, but the gunfire has become much more sparse.

"Inform the Soviets that this afternoon the transaction will take place, I don't want to wait until tomorrow, and even more so until dark......"

When it became known that the special operations battlefield on both sides was gradually decreasing, the gunfire was becoming more and more sparse.

Liu Yijiu made such a decision.

The Soviets should be aware of the situation on this side.

Liezhige didn't know at all, the KGB people wanted to snipe Liu Yijiu to stop the deal, and it was even more unclear that the top level of the CPSU felt a very strict threat to having people like Liu Yijiu in the country.

They don't want the country to rise.

The world is only so big, and China must not be allowed to rise, even if there are irreconcilable contradictions between them and Europe and the United States.

In any case, the territory of the USSR was full of Caucasians.

China, on the other hand, belongs to the yellow race.

"Swap!"

After Lieri Ge knew Liu Yijiu's request to make the deal in advance.

After thinking about it, he nodded.

The special forces should have failed!

Immediately, under the protection of security personnel, they headed for the border port between China and the Soviet Union.

Liu Yijiu, Jiang Sen and others also went to the border port, which used to be impassable, and in recent years, there has been more secret trade with the Soviet Union, and the trade between the two sides has also intensified.

On the Heilongjiang River, which is not wide, there were originally no bridges, with the support of sappers on both sides.

Each built a wharf capable of accommodating a large number of tonnage cargo ships, and each side controlled half of the river area, which was filled with movable fortifications when there was no deal.

Liu Yijiu's situation couldn't help but be a little surprised.

This area of Fuyuan has changed very much from the last time he was here, and there was originally no treaty port here.

The railway network in the northeast was not connected to the Soviet Trans-Siberian Railway in this region, but I did not expect that under the construction of engineers on both sides, it had become like this.

"Xiao Liu, you can't go over! In case they ......"

Johnson has always been worried about his own safety.

Liu Yijiu's safety is very important.

Liu Yijiu shook his head, didn't say anything, and stepped directly on the ferry on his side.

Several security guards in black security uniforms were beside him, and the height of these people was much taller than Liu Yijiu.

Surround Liu Yijiu, even if the sniper is outside.

It is not always possible to find an opportunity to shoot.

The same is true for Lierige.

The two ships met above the center of the Heilongjiang River and docked together.

"General, everything you want is ready, what do we want?"

Liu Yijiu pointed to the containers piled up on the dock behind him and covered with thick camouflage nets.

"Is it ready, is it ready?"

Lie Rige grinned, but his heart became cold, the plan of the special forces did not seem to be successful, and Liu Yijiu didn't seem to know about this matter at all, or didn't say it at all.

"This transaction is really important, so we need to take stock first."

"Of course, it's just that you've counted it, how can we be sure that what we want is ready?"

Liu Yijiu is not a fool either.

The troop movements on the opposite side are clear on this side.

"The troop movement on the other side of you is not going to snatch these things, is it?"

"How is that possible! The movement of our troops is to implement the agreement between our two sides that our troops will be withdrawn via the Guò Trans-Siberian Railway......"

Lie Rige was stunned, "This is just the beginning of the transaction, the loss of the five-axis machining center provided by Japan, if your side is broken again, we will lose more......"

Liu Yijiu didn't speak, and Lie Rige took the group on the Chinese ferry and came towards the dock on the Chinese side.

The boxes containing six five-axis machining centers were neatly arranged in a row on the docks, and there were many fortifications outside, and all kinds of high-performance chips for the Soviet Union were also tightly guarded in the surrounding area.

The people led by Lierige began to inspect and count with the assistance of Chinese personnel.

When he learned that the quantity in it was exactly the same as the one on the list, Liu Yijiu was about to ask people to follow him to check what the Soviet Union was going to trade, but was stopped by Leonid.

"Liu, although we have cooperated many times, but this five-axis machining center is different from other processing equipment, without checking the performance, we can't be sure that your five-axis CNC machining center will be the ...... we need"

Leonid's words made Liezhige frown.

He turned to the head of the KGB, who did not make eye contact with him at all.

"There's no problem with that. A five-axis machining center is nothing else after all! And the exchange is Tu-22M, doing business, what is important is a matter of integrity. The reason why these machining centers don't have wood on top of the spindle to hold the position is because we want to show you the performance before the transaction......"

Liu Yijiu smiled.

The spindle is relatively heavy, and these boxes have just been able to fit the five-axis machining center, and the bumps along the way will definitely have a great impact on the performance of the five-axis machining center.

On both sides of the transaction, neither of them will honestly give the best to the opponent.

Under the command of Liu Yijiu, the Chinese technicians were directly asked to disassemble a rectangular box on the top of the outer packaging box of the machining center, and at the same time, the 98th Division stationed here found generators, voltage stabilizers, compressor pumps and other necessary equipment for the machining center, and immediately generated electricity on the site and connected the machining center inside.

When the power is turned on, the technician enters a series of programs into the operating system, and by the time everything is done, the sky has begun to darken.

"Tighten the vigilance around and don't let their people touch ......"

Li Xiangyang did not appear at the place of trading, Liu Yijiu was always on the dock with Lie Rige and Jiang Sen and others.

The other party is obviously dragging his feet.

And Liu Yijiu's special forces have not returned yet.

"Chief, it's ready, is it a test run?"

After completing the preparations, the technician of the operation asked Liu Yijiu.

"Start running dry!"

The sky around Liu Yijiu nodded.

"Hoo ......"

When the technician checked the program and the settings on the machine tool again, pressed the green start button of the control system, the original stationary machine tool, the spindle quickly moved downward, at the same time, the workbench was also moving to the transverse and longitudinal at the same time, moving rapidly, even with hydraulic weight reduction, when moving quickly, the slight friction sound of the machine tool guide rail pair and the friction sound of the ball and the screw on the ball screw were very clearly transmitted in the deafening generator sound.

When the moving parts of the machine tool move rapidly, the tool magazine also begins to "boom"

This is in preparation for the tool change, and the tool that is ready to be changed to the spindle is moved to the tool change position.

When the spindle is lowered to a long distance from the table, the spindle stops moving.

At the same time, the tool holder in the tool magazine began to slowly move from the position parallel to the workbench to the bottom until it was parallel to the spindle.

The tool change manipulator that was originally parallel to the Y direction of the machine tool spindle, driven by hydraulic pressure, quickly rotated 90 °, and the semi-circular claws on both sides of the manipulator just stopped at the position of the spindle and the tool magazine, grabbed on the card groove of the tool handle, and then suddenly heard "bang"

With a sound, the manipulator began to fall rapidly downward under the impetus of hydraulic pressure, and then when it reached the position, it directly rotated 180 ° again, pulled up violently, and the tool handle that was originally on the spindle and the tool handle of the tool magazine changed positions with each other.

"Bang!"

With another sound of air pressure, the tool changer releases, rotates 90° in the opposite direction, and then returns to its original position, and the handle of the tool magazine with the vertical downward direction also begins to slowly rotate the direction until it is fixed in a position perpendicular to the spindle.

Then the magazine began to spin again...... (To be continued.)

This book is from /book/html/27/27564/