Whether it is Liu Yijiu's opposition or not, it is not clear where the station is.

Even if it is not discussed at the Standing Committee, it must be discussed at the Central Military Commission. Liu Yijiu put forward his opinions, and the old man accepted them, and they would only put them into practical action after they were discussed and approved by the Military Commission.

Most of the places in Daba Mountain are high and densely forested, and many of the places inside are sparsely populated, and they are not easy to be detected by US imperialist reconnaissance satellites.

This is the reason why the main structure of the three-line construction was chosen in this mountain.

In the end, Liu Yijiu didn't bother to pay attention to where the unit that would become the development and exploration of the Chinese army was stationed, even in Daba Mountain, it had nothing to do with him. By the time he left, it was already dark outside.

In the early morning of this winter before smog, Liu Yijiu refused the opportunity to dine with China's top leader, and left a courtyard in the South China Sea with a convulsive face. Li Rui was in the car outside, wrapped in a thick military coat and already asleep.

"Let's go back to Rongcheng today and join the Soviets." Liu Yijiu just said such a sentence, and then asked the driver to drive them back to the guest house.

The Soviets were going to Chengdu to visit their CNC machine tool factory to determine whether to cooperate with them.

For this, Liu Yijiu does not think that there is anything worth keeping secret.

The urgent need of the Soviets for CNC machine tools is an opportunity for China's machinery manufacturing industry.

Ordinary machine tools, the Soviets have surpassed the whole world, but in terms of numerical control, they are the most backward in the world. Khrushchev may be blamed for this. Perhaps it is also to blame the character and national habits of the Soviets.

CNC machine tools are precise, not rough style.

For Liu Yijiu, he can arrange to visit Rongcheng the next day. Along the way, the Soviets changed their methods to inquire about Liu Yijiu's negotiations with the Americans. was cleverly avoided by Liu Yijiu.

This time, thanks to the blessing of the Soviets, Liu Yijiu did not take a military transport plane again, but the bigwigs above allocated a Trident special plane to send them to Rongcheng. When he arrived in Rongcheng, it was only ten o'clock, and Liu Yijiu directly led the Soviets straight to the Hongshan Machinery Factory in the western suburbs of Rongcheng.

Hongshan Machinery Factory, originally when it belonged to the Ninth Academy, was called Qianjiang Machinery. It is mainly used to produce small machinery and equipment such as ordinary bench drilling machines and tapping machines, and even large radial drills cannot be produced. According to the tradition of the Nine Courtyards. Perhaps it is the tradition of China's military industry, and the name of any key unit will start with red letters. Liu Yijiu did not object to this system in the slightest.

Before the Ninth Academy took over, there was no competitive enterprise in production. In the era of the planned economy. The national reform has eliminated such factories with duplicate production capacity and rotten streets in the first batch.

After the Ninth Institute took over, most of the skilled workers in the equipment department of more than 10 machinery factories were transferred to this factory, and a group of skilled workers were transferred from the 541 base to enrich the strength of the inside, and a complete machinery and equipment production factory was established.

Now, there are nearly 2,000 people in the whole factory, and the production capacity of machinery and equipment in the third district is gradually shifting to this side. Ordinary small lathes, milling machines, radial drills can be produced here, and more importantly, the main production equipment here - CNC lathes and CNC machining centers.

throughout the country. It can be regarded as a relatively large specialized machinery factory.

The three areas in the base are still mainly researched, supplemented by production, and the main production of equipment in it is put here.

After the steel from Pangang is cast into the required large castings in the workshop there, and after simple rough processing, it will be transported to the Hongshan Machinery Factory in Rongcheng, where it will finally undergo a series of follow-up processes such as heat treatment and precision machining.

The management of the Hongshan Machinery Factory attached great importance to Liu Yijiu, a bigwig who rarely showed up at the Hongshan Machinery Factory, who brought the Soviets to inspect this time.

Luo Yuanxiang and Zhao Mingshan, who were transferred from the third district to serve as the factory director, waited at the factory gate early with a large group of people.

Originally, they were going to meet Liu Yijiu at the airport, but it was too late, not to mention, the young Director Liu didn't like to be too lively.

However, when Liu Yijiu and the others got out of the car, they saw the foreigners who were tall and big, with high noses and blue eyes, and they were shocked that their chests turned over a monstrous wave, this is a top-level secret unit, producing the most important CNC machine tools in the national military system, how could Director Liu bring these foreigners without knowing how to do it?

"Lao Luo, Lao Zhao, this is a customer from the Soviet Union, and all the production workshops of our Hongshan Machinery Factory are open to them......" Liu Yijiu saw their doubts from the seriousness of the two, but they couldn't explain it here, so they could only order with a straight face.

"Welcome, welcome......"

The two are not the leading cadres who were born and raised in the Ninth Academy, but the transferred cadres who entered the Ninth Academy at about the same time as Liu Yijiu.

For Liu Yijiu to climb up at the speed of a rocket in the Ninth Courtyard in the past few years, it is impossible to have no ideas in his heart. But they had no choice, the old people in the entire Nine Courtyards were supporting Liu Yijiu, they couldn't.

Fortunately, in the end, under Liu Yijiu's suggestion, the base transferred them to Rongcheng as the person in charge of Hongshan Machinery, and got rid of the hard life like imprisonment in the mountain.

The one who can't be offended the most is Liu Yijiu.

Like other newly built factories under the Ninth Academy, the workshop of Hongshan Machinery Factory is also a light steel structure, which is very different from the original Soviet-style workshop, and this alone makes the Soviets a little shocked. The degree of reform and development in China seems to have far exceeded the imagination of the entire Soviet Union.

"This is our newly built light steel structure workshop, the main structure is supported by I-shaped steel, and then supplemented by other lighter materials, paved with color steel, beautiful appearance, and ......the construction progress is fast," Liu Yijiu introduced to the Soviets.

"This is our machining workshop, due to the transportation of large equipment, so the current production capacity is not very sufficient, large guide rail grinding machines, from Ukraine, heavy boring and milling machines, from Romania...... "These equipment, many of which were imported from the Soviet Union in the sixties.

Liu Yijiu didn't mind telling the Soviets in the slightest.

It's exciting to make new equipment out of Soviet equipment and then sell it to the Soviets.

The neatness inside the workshop made the Soviets' mouths open wide.

China's industrial base was inherited from the Soviet Union, and everything from the Soviet Union was born of enterprise management, technology, and so on. But now, in the huge production workshop, all kinds of equipment are neatly placed, and all kinds of processing and transfer parts are placed neatly and neatly, giving people a pleasant feeling.

Inside the factories of the Soviet Union, there was complete chaos.

Other factories in China are the same as in the Soviet Union, where the equipment may be neatly arranged, but the area next to the equipment, the various tools and processed workpieces are not so neat. In the eyes of the Soviets, it is a matter that greatly affects production efficiency to organize these environments that are not related to production, after all, under the production of special planes, all the work that skilled workers need to do is to work, and handling is the business of porters!

"CNC machine tools, and ordinary machine tools, especially in machining, the only difference is the need for electronic control systems, as well as servo drive systems...... "When I visited the neat and clean machining workshop, I went to the assembly workshop.

Rows of machine body components are assembled to varying degrees in different positions.

This uses the assembly line of personnel flow, rather than the assembly line assembly of product flow like other assembly lines.

"The control system, in Chinese, everything, is independently developed by our China, including the chip, so at this point, we do not have to worry about being sanctioned by Western forces led by the Americans." These CNC lathes are mainly used to process large quantities of small products, of course, rotary body parts with complex shape and high precision requirements are also processed by these CNC lathes. What we see in front of us is just a simple CNC lathe for machining large quantities of parts, which can process parts with a rotary diameter of less than 800 mm...... "For the first CNC lathe assembly workshop, the Soviets were clearly not interested.

Liu Yijiu led them into another workshop.

As soon as I saw the situation inside the workshop, the eyes of the Soviets lit up.

CNC machining center!

In the entire huge workshop, hundreds of CNC machining centers that have been formed and have not yet been formed are neatly placed!

Most of the shells are not installed, and even these CNC machine tools near the door are running automatically without the operation of workers, the Z-axis where the spindle is located is moving up and down at different speeds, and the workbench is running rapidly in front and back when the Z-axis is moving. Next to these self-confident CNC machines, there is a one-meter-high control cabinet with dense buttons, and at the top of the table, on a display screen not much bigger than a palm, rows of programs are flashing non-stop......

This is the program verification after the assembly of the CNC machine tool, which needs to detect the operation of each component before leaving the factory to ensure that there will be no major mechanical failures after leaving the factory.

But just these verified run-and-hop CNC machines made the Soviets understand that the Chinese were not bragging to them.

"These machining centers in front of me can process parts with a length of one meter eight, a width of one meter, and a thickness of eight hundred millimeters with a maximum stroke...... Liu Yijiu did not introduce these CNC machine tools in detail.

The Soviets were very aware of these things.

Otherwise, they would not have such an urgent demand for CNC machine tools. (To be continued.) )