readx;

"It's naturally right to train reserve talents first, but sending hundreds of people at once seems to be a bit too much, right?" Although Ye Kai felt that the idea of a machine tool factory was desirable, there was no need to send so many people out, not to fight wolves?

"It's not all sent out all at once, in that case, the backbone of the machine tool factory will all be evacuated......," explained Sun Jingwen, the director of the factory, "We have also formulated a five-year plan, sending about 20 people every year for rotation training, in order to ensure that the technology is not backward, can keep up with the best level of foreign countries in time." Pen %Fun%Pavilion www.biquge.info╔╗"

Ye Kai listened, and then nodded.

He was taken aback by this 100-person training plan just now, after all, it is only a prefecture-level enterprise, if it really has the ability to send hundreds of people abroad for further study at once, I am afraid that it will have a great impact on the whole country.

And, how much does it cost?

Of course, there are many accompanying questions, such as which country to study? Which company is willing to accept these people?

"When it comes to manufacturing, Germany is obviously the first choice. ╔╗" Sun Jingwen said.

The development process of domestic machine tools can be roughly divided into two periods.

Before 1979 for a period, at that time due to the lack of understanding of the characteristics of CNC machine tools, the development conditions, in the case of poor personnel quality, weak foundation, accessories are not up and down, three ups and downs, and finally due to poor performance, the production of machine tools can not be used for production and stopped.

After 1979, with the support of the policy, from Japan, Germany, the United States, Italy, Spain and other countries to introduce advanced technology of CNC machine tools and carry out joint ventures and cooperation, to solve the problem of reliability, stability and sexuality, CNC machine tools began to be formally produced and used, and gradually developed.

It is undeniable that in these years, the domestic CNC machine tool design and manufacturing technology has been greatly improved through the cooperative production of advanced CNC machine tools, so that the design, manufacturing, use level has been greatly improved, narrowed the gap with the world's advanced technology in metal processing, through the use of foreign advanced components, CNC system supporting, to supply the needs of the domestic market, but the key technology of the test, digestion, mastery and innovation is poor.

So far, many important functional components, automated tools, and CNC systems rely on foreign technical support, and cannot develop independently, and are still in the stage of self-development from introduction, not to mention the design and manufacture of high-speed, high-performance, five-sided or five-axis linkage CNC machine tools. ╔╗

Talking about the relationship between technology introduction and independent innovation, Sun Jingwen, director of the city machine tool factory, said with deep feelings: "Technology introduction is necessary at a certain stage, but it must be adapted to its own research and development capabilities." The core technology and key components cannot be introduced, in the final analysis, it still depends on its own technology and brand, and the waist rod will never be straight! ”

For Sun Jingwen's words, Yan Qingshan, secretary of the party committee of the factory, also has a very clear understanding, he also said that there is no cheap to pick up in the world, the real core technology is not to come, now developed countries and multinational companies are paying more and more attention to technological protection, in order to safeguard their own interests of the domestic machine tool industry, facing increasingly serious intellectual property barriers.

Ye Kai listened to their ideas very carefully, and also knew that for many domestic enterprises, the impact of technology dependence is far more profound and difficult to get rid of than capital dependence and market dependence.

Throughout the development of domestic industries, many of them still follow the mode of gradient transfer of industrial technology, and technological development is mainly based on tracking and imitation.

"The development of tracking technology cannot become an industry, and the core technology of the industry, especially the cutting-edge and strategic high technology, cannot be introduced. ╔╗" Sun Jingwen said, "If we blindly follow and imitate, it will further widen the gap between China and the world's advanced level, and will eventually form a technological dependence." ”

In fact, for CNC machine tools, programming or something is trivial, the quality of data machine tools, the core standard is machining accuracy, everything is for the processing accuracy of the service, the current machining accuracy of domestic CNC machine tools, compared with German machine tools, there is indeed a big gap to catch up or even exceed, it is not easy.

Therefore, Sun Jingwen's first choice for learning is naturally still the German CNC machine tool manufacturing industry.

"Eat some more watermelon......

At this time, an old man with gray hair got up a tricycle and pulled a dozen large watermelons behind him.

"Liugong ......"

When the factory director Sun Jingwen and the secretary Yan Qingshan saw the old man, they all stood up.

"Entertain guests. ╔╗" The old man said with a smile, "Which one is Mayor Ye, I have to thank you in person." ”

"Oh?" When Ye Kai heard this, he was stunned for a moment, not knowing what he meant.

"Liugong's son, one of the seriously injured, is now recovering well, if he hadn't been sent to the hospital in time at that time, I'm afraid he wouldn't have been able to save it." Sun Jingwen explained.

"This is Mayor Ye......" The old man was also a little surprised when he saw such a young mayor, but he still walked over and was about to bow to him.

"Don't you dare to ...... this" Ye Kai was shocked when he saw this, and hurriedly helped the old man up.

"If it weren't for Mayor Ye's rescue, our Lao Liu family would be doomed." The old man said gratefully.

The old man is the chief engineer of the original factory, and many of the leaders are apprentices brought out by him, who have a lot of experience in technology, and although he is now retired, he occasionally participates in important meetings in the factory as a consultant to give them some reference advice.

This Liugong is very powerful, and even participated in the "two bombs and one star" project that year. ╔╗

"At that time, our technological strength, both in terms of the number of personnel and the level of technical equipment, was far inferior to the USSR and the United States, but we went from the atomic bomb explosion to the breakthrough of the barriers to hydrogen bomb technology, in turn, much shorter than the USSR and the United States in time." Liugong said, "Later, I also reflected on it, and I thought that one of the most important reasons was that there were real technical people at that time. Host. ”

The old man said that because at that time, reactionary academic authorities were being criticized, and the newspapers were repeatedly and severely criticizing all kinds of oppressive and authoritarian academic styles, so that few people dared to claim to be authoritative and honest, and a highly democratic atmosphere was formed within the research team, and students who had just graduated from universities and scientists with old qualifications could debate at the same time, and sometimes they stayed up all night to argue about technical issues, and even slapped the table.

Even an old scientist like the Father of the Two Bombs often participates in table debates with hairy young men. Lord, brought about the rapid progress of thought and technology, not only to accelerate the speed of technological progress, but also to accelerate the growth process of the technical echelon in the middle of such a process.

The old man also said that at that time, due to the general equality of human relations, many social and class barriers were essentially non-existent, and some old workers also participated in the discussion on the table, and many details and process obstacles could also be brainstormed, resulting in a relatively balanced project process, rather than being limited to the first breakthrough in key technologies, which avoided the failure caused by the details in the follow-up experiments.

Therefore, the experiments of many projects at that time were almost a success, and all the problems and hidden dangers were often in the technical people. The main middle has been fully recognized and valued, and there are many plans and designs in advance.

"We are academics in the machine tool factory. The main atmosphere is also relatively strong, which is brought out by Liugong......" said Sun Jingwen of the factory, "Although the funds in the factory are not very abundant, but for the support of technological transformation, it has always been the best to do its best, and the reward is also the best for the employees who put forward key design ideas and technological transformation."

"Of course, there were some special circumstances at that time...... the old man recalled, "At that time, no matter what kind of research institution, no matter how much effort they spent to come up with the latest results, as long as you have a letter of introduction, as long as you meet the confidentiality regulations, all their latest results will be presented to you unconditionally, without the slightest reservation, so a lot of duplication of technical research is avoided, and the efficiency is greatly improved." ”

Ye Kai nodded after hearing this, some situations under the special system still have some positive significance.

After all, if technological innovation is linked to the potential interests of the market, of course, it is particularly necessary to keep it confidential, even if it is only related to the individual's professional title and academic status evaluation, the relevant personnel must also have the need to hide their secrets.

However, in the country at that time, all private ideas were thoroughly criticized, and many evaluation systems that helped to consolidate private ideas were destroyed, so that people were able to open up their income to the public like never before.

In this way, as long as any research institute and any researcher in the country have made a breakthrough in technology, there is no longer any need for other relevant personnel or projects to duplicate work, and they can share the latest technological achievements at no cost.

Since the transformation to the market economy, patented technology is also the fruit of labor, and it is natural to conform to the laws of the economy and reflect its own value, and unconditionally deprive others of the fruits of their labor, which is contrary to the mainstream trend.

Ye Kai talked for a long time with the leadership and worker representatives in the city machine tool factory before finally leaving the factory.

"Leader, it's also fun in the enterprise." Secretary Tang Mu sat in the car and turned around and said to Ye Kai.

"Hmm." Ye Kai nodded, and said in his heart that he ate a cart of big watermelons from the old man today, and he must do something to be able to account for the past.

Moreover, if the city machine tool factory can be built, it will have great benefits for both public and private.

In terms of high-end CNC machine tools in China, it has not been very powerful, and the machining accuracy has not been able to get up, if it can make Dongshan Machine Tool Factory take the lead in breaking through, it must be a very good thing.

Therefore, he quickly thought of some things that he had obtained from Russia through Zhong Liyu, which should also come in handy at this time, even if they wanted to go to Germany to study or something, they could also be helped by the East China Shen Yun Base.