134. Preparations before leaving the imperial capital

The sound of the magic seal machine printing rune boards rumbled together, and boxes of magic rune boards crashed into the rail car, and were transported by the dwarves to the temporary warehouse in the underground cavern, which was basically located near the teleportation altar, so that it was easy to get to the warehouse of the imperial capital through the teleportation altar.

Due to the increasing production of the Magic Seal Rune Plate, the production capacity of the Rune Plate Workshop managed by Murray has been unable to fully absorb the production capacity of the Demon Seal Workshop, and Murray has proposed the expansion plan of the Rune Workshop several times, but I don't want the scale of the workshop in the Imperial Capital to be too large, so I have not signed his plan, so this matter has been shelved.

This magic seal workshop was created by four old dwarves I bought back in the slave market, and the metal softener developed by Francis scholars completely solved the manufacturing problem of magic marking machines, and after four major changes to this batch of magic printing machines, the success rate of printing 'fire gathering magic' rune plates has increased to 65 percent, and now the imperial capital magic market is full of a large number of 'fire gathering magic' and 'miniature tornado' rune plates.

The punch of the magic printing machine smashed on the black iron cuirass of Nakma with a huge roar, and the Mithril magic line was clearly printed on the black and shiny armor, and the two strong dwarves in front of the magic printing machine worked together to hook the black iron armor of Nagrama from under the magic printing machine with iron hooks, and quickly threw it behind him, and pulled out a black iron cuirass of the Nagrama people from the material turnover box on the side, and pushed it under the magic printing machine along the slide rail of the auxiliary feeding rack, and the black iron cuirass of the Nagrama people easily slipped into the concave mold of the magic printing machine, and almost at the same time, another dwarf brushed a layer of Mithril solution on the punch of the magic printing machine, and the magic printing machine punch fell down again with a roar, a new magic pattern structure was born.

However, due to the uneven quality of the substrate of the Nagrama black iron cuirass and the relatively complex appearance, this has brought a lot of uncertainties to the printing work of the magic printing machine.

Even if the Nagrama Black Iron Armor fails during the printing process, it will not become a charge in the North Duisburg Foundry, and a group of Dwarves will be responsible for handling the failed Black Iron Armor, wiping off the failed Mithril Patterns of the armor with sandpaper and then re-polishing the surface with burlap.

I asked Harrison, the old dwarf next to me, "How many pieces can this new Nakma Magic Pattern Construct be printed in a day?"

The old dwarf Harrison was followed by a group of young dwarf craftsmen, and at this time, he turned his head to look behind him, and a young dwarf craftsman quickly stood up and replied: "At present, the magic seal workshop makes almost thirty sets of this magic pattern construction every day, and it is estimated that the output will be increased a little more next month." ”

I took a few steps forward, stopped in front of a magic seal machine, and asked him, "What do you think is the biggest difficulty in making this new magic pattern structure?"

The young dwarven craftsman rubbed his big red nose, and said loudly in an urn voice: "Everything is fine! The main thing is that the base material of the magic pattern construction is not sufficiently prepared, and the Nakma armor that failed to print for the first time needs to be re-polished, and the refurbished Nakma black iron armor is of even worse quality, and this new type of magic pattern construction is too cumbersome, and a single breastplate requires two dwarven craftsmen to work together to carry it." ”

Dwarves are naturally loud-voiced, and even reverberate like rolling thunder when they speak in the caves.

The old dwarf Harrison stood in front of a large magic printing machine with a shy stomach, knocked the black iron shoulder pad in the material turnover box next to the young dwarf with the crutch in his hand, blew his beard and stared at a dwarf operator sitting in front of the printing machine, "Why don't you brush the co-solvent? Who is your squad leader? Let him roll over immediately!"

The dwarven operator fell from his chair in fright, and ran to the other end of the row of magic seals, bringing back a red-bearded dwarf in a short time.

At this time, the old dwarf Harrison used his iron staff to knock several black iron shoulder armor in a row, it seems that the Mithril magic line on the black iron shoulder armor is still very strong, the red-bearded dwarf stood in front of Harrison with a nervous face, the old dwarf Harrison's anger has decreased a lot, he took out his handkerchief and wiped his oily forehead, and asked the red-bearded dwarf calmly: "Tell me how you ensure the cohesiveness of the magic line?"

Mr. Harrison ...... These Devil's Shoulder Pads have undergone a 'pickling' process beforehand. The red-bearded dwarf whispered.

The old dwarf's eyes lit up, and he immediately asked the red-bearded dwarf, "Pickling?" ”

The red-bearded dwarf lowered his head and thought for a moment, reorganized his language and said: "I think there are two main factors that affect the adhesion between the Mithril solution and the black iron, the first is the oxide scale on the parts of the black iron armor, and the second is the oil stain on the surface of the black iron armor, so I dug a pickling pool over there, and through several experiments, our third group came to the conclusion that a pickling before printing not only ensures the adhesion of the magic line on the armor, but also slightly improves the success rate of printing......"

I couldn't understand what they were saying, so I asked the dwarf next to me, "What is pickling?"

The dwarf hurriedly explained, "Pickling can effectively remove oil stains from the surface of the black iron armor. ”

At this time, I heard the old dwarf Harrison ask urgently, "Is there a good magic pattern construction?"

The red-bearded dwarf immediately puffed up his chest, pointed to the end of this row of magic printing machines, and said to the old dwarf Harrison, "There are almost more than thirty sets of them, and they are placed on the armor rack over there, Mr. Harreson, please come with me." ”

When we reached the end of the cavern, we saw a circular cavern with dozens of Nakma black iron armor printed with the Mithril Demon Pattern, as well as several broken iron tables, on which were spread out several printed drawings of the Demon Pattern, which were full of various annotations, and several Dwarven craftsmen were gathering around an iron table and engaged in a heated argument.

The Nakma black iron armor placed on the wooden frame is more than three meters high, the upper body armor looks a little exaggerated, the dark and shiny surface is covered with silver.

A set of Nakma black iron armor doesn't look like much, but after these Nakma black iron armors are printed into a magic pattern structure, they are hung on a wooden frame one by one, and there is a continuous flow of mana on the armor, and the visual effect is suddenly revealed.

Standing in front of a set of demonic armor, if I look at it at level, I can only see the scales on the belly of the armor.

"I think it's working out pretty well. "I groped for the Mithril Pattern on the armor with my hand, and felt the magic power on the Magic Pattern Construct flow slowly, like a meandering stream, spreading outward from the gem base, forming a complete Magic Pattern Circle.

I pointed to the set of demonic patterns in front of me and said to the minotaur warriors standing behind me, "Ruka, you can put on this junior demonic pattern structure and feel it, and see how much this demonic pattern structure has improved you." ”

Without hesitation, Ruka withdrew the hard leather armor on his body, and put this slightly loose set of Nakma black iron armor on his body, and the two fists collided together in front of his chest, sending out dull power fluctuations, Ruka tried to do a few squats, lunges, running and jumping and other actions, Karantso raised the 'Ancient Oath' shield that Ruka had erected aside, and said to Ruka: "Try two punches!"

The Minotaur's fist slammed into the shield with a 'thump' sound, and with each punch Karantso was forced to take a step back.

Before Karantso could get angry, the minotaur stopped decisively and said to me, "Oh, it looks pretty good, it's a magic pattern construct that strengthens the amplification, and there are no other auxiliary magic effects. ”

I nodded, this kind of magic pattern structure transformed with Nakma black iron armor is specially made for those barbarian slaves, and the 'power increase' is the most suitable for barbarians, but it will be less than two weeks before we set off for Qiyan City, at this time, the magic seal workshop has just made more than thirty sets, and there are a total of nine hundred barbarian slaves on the side of the heavy crossbow group, and it is obviously impossible to change all of them in a short time.

After looking at the production line of the Nakma Black Iron Armor Transformation Demonic Pattern Structure, I asked the old dwarf Harleyson, "How is the development of the minimalist version of the primary Demonic Pattern Structure?"

The old dwarf Harrison stopped in the passage of the magic seal workshop, and led us into a stone room with only one magic printing machine, the shelves on the wall were stacked with magic printing heads and concave molds, this was a magic printing machine experiment room, the old dwarf Harrison stood at the door, pointed to a set of black iron armor and introduced to me: " The first sample of the minimalist magic pattern structure can be considered to be made, and at present, the substrate of this black iron armor cannot be manufactured in batches, and if you want to manufacture it in batches, you need to add at least five more magic printing machines, and it will take at least two weeks for the rest of the magic printing machines to be made. ”

If these Nagrama black iron armor changed into magic pattern structures are specially made for barbarian slaves, then this minimalist version of the magic pattern construction is designed and manufactured for those soldiers of the Green Empire who have the strength but no money to become a construction knight, I plan to launch this low-profile version of the magic pattern construction in the imperial capital tomorrow spring, the price is about fifty to seventy magic crystals, and it depends on the manufacturing cost and the reaction of the market.

However, before the Winter Magic Pattern Construct Exhibition, Yerkes Scholars still need to re-optimize this minimalist version of the Magic Pattern Structure, so there is still room for further improvement in the attributes of this Magic Pattern Structure.

I said to the old dwarf Harrison, "Okay, don't rush the minimalist version of the magic pattern construction, just make it step by step, but these Nakma black iron armor printing magic pattern arrays can't be delayed, we have to find a way to grab it." ”

The old dwarf Harrison hurriedly agreed

......

After Arya and I walked around the underground caverns in the Willow Valley, we returned to the Imperial Capital Warehouse through the Teleportation Altar, where Murray's wagon had just arrived with a batch of rune plates to leave.

I didn't take a magic caravan, and I walked directly across a street to Arya's manor, and the winter in the imperial capital was still a little cold.

Walking directly into the living room through the door, the butler stood respectfully at the door, took off her coat and long leather boots under the service of the maids, and put on comfortable soft-soled shoes, Arya lay on her side on the soft leather sofa, and the two maids lifted the cumbersome ornaments on her body for her, she looked at me with a curious face, and asked, "Are you going to enter the market of primary magic pattern construction next spring?"

"I haven't thought about it yet, maybe the first batch of primary magic pattern constructs won't be put on the market, or it can be traded directly to a certain lord, anyway, during the plane war, this thing won't be unsalable. As I spoke, I took the warm towel the maid handed me and wiped my face.

I sat down on the couch beside her and said to Arya, "You take care of the business in the Imperial Capital, and if you have an unsolvable problem and can't find me for a while, go to Count Conrad of the South Wind Legion." ”

Arya sighed softly and said, "I know, the Babington family has left the imperial capital, what else do I have to worry about, but you, if you explore over there in Qiyan City, you should be more careful." ”

I unbuttoned the collar of my shirt and said, "I have invited a lot of people this time, plus those orc warriors and barbarian slaves, and the safety is still guaranteed." So...... It wasn't me who was going to be scared, it was the tribes of lizardmen. ”

I was sitting in the living room chatting with Arya when the door to the living room was pushed open from the outside and Caterina walked in from the outside.

She walked up to me, handed me a thick parchment note, and said, "Sue came to look for you today, but unfortunately you weren't there, leaving a note for you." ”

"She's looking for me for the southbound business?" I asked casually, reaching for the note.

Caterina said, "The note only says you're drinking at the Tower of Pride Backstreet Bar. ”

......

I met Sue and Anne in an oak house tavern in the backstreet of my Tower of Pride.

The two sisters were sitting at the bar, watching the bartender's fancy show with great interest, and two young nobles wanted to strike up a conversation, but were directly frightened away by the dagger that Anne had taken out of her arms.

As authentic Elders, Sue and Anne also like to drink some golden cider.

I took Caterina to Sue's side, and by this time Sue was already drinking and blushing, and she looked up and saw that it was me, and her eyes were as bright as the crescent moon, like a night lily that suddenly bloomed, and when she met her, she asked me drunkenly, "Jiga, when are we leaving?"

"Hello over there, Lord Sora?" I said, sitting down in the empty seat next to her.

Su said very happily: "Yes! I haven't taken a long vacation for so long, and the teacher also supports me to go out for a walk." ”

"That's good. With that, I asked the bartender for two glasses of ale.

Su and Anne were wearing the cashmere skirt that the girls in the imperial capital liked to wear, this kind of long skirt looked very loose on Sue, but it was tight on Anne, completely revealing Anne's bumpy sexy figure, and after Sue, I asked Anne on the other side: "Sister Anne, do you know a good guide who is familiar with the wild swamp over there in Strange Rock City?"

Anne raised her head and said to me casually, "The guides who are most familiar with the Savage Swamp are the group of slave hunters, they form a small circle in Strange Rock City, and they rarely deal with outsiders, only the slave traders can contact them......"