As the metal shards melted, Bai felt that the connection between himself and the shards had become much weaker. Pen × fun × Pavilion www. ｂｉｑｕｇｅ。 ｉｎｆｏ

But fortunately, although it has been diluted a lot, Xiaobai can still see the properties of these melted metal fragments through the feedback of the analyzer.

After re-tempering, these metal fragments regained their toughness.

And under its constantly floating attributes, Xiaobai also saw an additional attribute.

Chakra Assimilation Rate: 80%

Does the chakra metal that has been assimilated by itself start to lose chakra after it stops injecting chakra? Xiaobai thought in his heart.

This assimilation rate is still decreasing as it is heated in a furnace.

Eventually, when the metal fragments were completely melted away, the chakra assimilation rate was maintained at forty percent.

But the good news is that the reprocessed chakra metal seems to have retained the remaining chakra, stabilizing at 40 percent and then not changing.

The metal tray was pulled out of the furnace and soon a special mold was used to hold the molten iron into the mold.

As the analyzer cooled, a long blue metal strip the length of a little white thumb appeared on the tray.

After reaching out and picking up the metal bar, Xiaobai put it in front of his eyes and observed it carefully.

The silver-white metal surface still had a little wind sound that could be heard by ear, and after Xiaobai picked it up, he could feel a little breeze stirring his hair.

It's just a little strange that the chakra contained in it seems to have changed its nature after being assimilated, and Xiaobai no longer has that affinity like a part of his body.

It's kind of weird.

Xiao Bai put the chakra metal aside, and then continued to look at the twisted knife strip in front of him.

In order to ensure that the original data of the two steel bars does not change, the small hammer on the analyzer is almost not hammered for a while before being put back in the furnace for tempering.

Finally, twenty minutes later, the two red-colored steel bars were twisted together.

After blending the two steel bars together, Xiaobai began to control the small steel hammer to beat the whole knife bar longer.

Whether it's the eleventh district in the real world or the Hokage world, none of these samurai and ninjas wear metal armor.

Although the texture of the armor on Xiao Bai's body looks very much like metal, a crisp sound can be heard after gently tapping it with his hand.

After knowing the texture of the armor, Xiaobai, who didn't have to think about the armor-piercing effect at all, chose the production method of the half-body blade without hesitation.

Different from the ancient weapons of our country, the eleventh district swords that are specially used to chop meat have one thing in common, that is, their blade widths are very high.

Whether it's a katana or a taiji, the ratio of the blade to the blade will be at least 1 to 1, and some knives that pursue extreme sharpness will even be more exaggerated.

This is also known as the half-body blade.

This sharpness, which has been magnified to the extreme, is terrifying in terms of sharpness, but it also sacrifices the sturdiness of the entire blade.

To put it simply, if you use this kind of knife to cut metal armor, then the wear and tear of the entire weapon is very terrifying.

The struck blade soon began to deform, and the long, narrow blade that had been pulled was quickly cut in a seven-to-three ratio.

The long blade was quickly cooled and set aside, and the short blade was heated and beaten again.

Xiaobai reached out and picked up the longer blade.

Although the blade looks dusty, the cross-section has a very beautiful pattern.

After checking one side and finding that there were no gaps in the entire blade, Xiaobai returned his attention to the iron felt.

With a quick stroke, the already thin blade was stretched again, and an iron drill began to punch holes in the deliberately thin handle.

Eventually, the entire blade was struck to the width of only one knuckle of Xiaobai's knuckles, and the metal hammer slowly stopped.

The seal carving knife began to slowly divide the bleeding groove in the lower part of the back of the knife, and in the blood groove, many small lines and lines were divided.

The reddish steel is unusually beautiful with the lines carved by the seal carving knife, and the feeling is like a landscape painted by Western oil paint.

A little mist spilled out to slowly cool the blade, and at the same time, Xiaobai began to sharpen the blade with a stone.

Because of the lack of tools now, Xiaobai can only use this delicate stone to polish the blade.

Looking at a piece of natural stone used to sharpen the knife blank like this, Xiaobai felt that his heart was dripping blood.

While waiting for the polishing to be completed, Xiaobai returned to the ground and found a whole log.

After placing the entire wood in the analyzer, the mist of water fell again, further cooling the still hot weapon.

The first part of the handle to be cooled is quickly covered with a sanded log and a wooden rivet is inserted.

And the sword god, which still had a residual temperature, gradually took on a shape under the rapid polishing of the stone.

Okay, now give it a try to add chakra metal and see if it works.

A robotic arm stretched out from the analyzer to absorb the chakra metal, and then a tiny needle like a pen began to fill the melted metal in the pre-carved lines in the blood groove according to Xiaobai's will.

Xiao Bai looked at the change in the nature of the chakra metal in the perspective with some nervousness.

After being melted and filled into these grooves, the chakra metal value, which had dropped to forty, dropped again.

Fortunately, the decline eventually stopped at about 20 percent and did not change.

An hour later, Xiaobai picked up the finished product and put it in front of him for a closer look.

The silvery-white blade has many fine lines on it, and on the sides of the blade, this twisted pattern is even more noticeable.

Because it is made of two different steels, the blade of the entire sword is not a single line, but has a small wave.

On the blood trough, the chakra metal containing the chakra glows a little blue, and the tiny words on it look particularly artistic.

Holding the handle of the knife with one hand, Xiaobai tried to swing the knife in his hand.

Zizi~

A piercing sound that did not belong to the sound of breaking wind sounded with Xiaobai's wave.

After hearing this harsh sound, Xiao Bai's eyes lit up: Sure enough, these seal words are effective!

With this thought, Xiao Bai once again changed the chakra in his body into the wind attribute.

In this swing, Xiao Bai deliberately drove the chakra on his body to pour into the blade, and at the same time, Xiao Bai swung out with a knife!

Swish!

After the faint sound of a knife, a small knife mark appeared on the wall in the distance.

What the?!

Seeing the scar, Xiaobai ran over quickly.

After carefully touching the slash marks on the wall with his hand, Xiaobai compared it with the knife in his hand again.

The scars on the wall match the blade in your hand!