After taking a turn in the empty underground base, Zhou Yu nodded while checking. Pen? Interesting? Pavilion wWw. ｂiquge。 ｉｎfo

"Good."

He was satisfied.

"Where's Hannah?"

When he came out, Zhou Yu asked, "Are all the materials I want ready?" ”

"Of course." Natalie said, "It was ready half a month ago. It's over there..."

Following the direction of Natalie's finger, Zhou Yu saw a 'hill' covered with a tarp next to the tarmac in the distance.

"Okay."

Zhou Yu smiled comfortably.

In the next two days, Zhou Yu was busy arranging the underground base.

First, a group of super servers ordered from IBM were moved into the main control center of the underground base, and Nuwa No. 1 was transplanted into it.

Nuwa No. 1 is not Pangu No. 1 after all. Pangu-1 is photonic intelligence, and the carrier is the human brain. In fact, Nuwa No. 1 is still an artificial intelligence in human cognition, which needs to rely on carriers.

Compared with Pangu No. 1, Nuwa No. 1's computing power is not bad. As far as Zhou Yu knows, there is no supercomputer in the world that can surpass Nuwa's computing speed. Not to mention exceeding, it is impossible to get close.

Computational speed is only one aspect of artificial intelligence, and since it is intelligent, it is natural to show her 'intelligent' side. In addition to not possessing the rich imagination of human beings, Nuwa No. 1 is actually not much different from human beings except for the basic rules of procedure.

Of course, compared with Pangu No. 1, Nuwa No. 1 still has a gap in this regard. Pangu-1 can use the human brain to achieve imagination that intelligent life does not have, while Nuwa-1 cannot.

This is a qualitative gap.

Moreover, Pangu No. 1 is omnipotent, and Nuwa No. 1 is such an artificial intelligence specially created by Zhou Yu for machining and manufacturing.

At least for now. Because Nuwa No. 1 has the ability to learn. The future may not be all-powerful.

After the main control room is arranged, the energy core is then placed in the energy space in the load-bearing column.

The energy network of the entire underground base is completely isolated from the outside world. The energy transmission routes are all laid out according to Zhou Yu's drawings, and the lines are all the kind of metal wires he made himself.

All energy interfaces are in line with the drawings.

The energy core was successfully installed, each line was connected instantly, and in the main control room, Nuwa No. 1 was activated, and the basement suddenly lit up!

The light source still uses electricity. It's just that an energy converter is used in the middle to convert the energy in the energy core into electricity, and then make the lights on.

But in addition to the light source is electricity, the energy used in various mechanical processes in this underground base will not be electricity. Rather, it is a high-power-optimized type of nuclear energy that is transmitted directly from the energy core.

"Nuwa-1 was launched, and the status of the base was detected... The status meets the requirements and the test is completed. Master, Nuwa No. 1 is always waiting for the master's orders. ”

A young female voice rang out in the base space.

Zhou Yu bowed his head slightly and said, "Stand by." ”

"Do as you are told, master."

The energy and main control centers are in place, and then, Zhou Yu moved the metallurgical furnace in the basement, the inverted triangle pyramid industrial machine and the unrecognizable automatic mechanical production and processing line that has been transformed by Zhou Yu into the base.

The metallurgical furnace is located in the material processing area. Industrial machine tools and fully automatic machining lines are located in the parts processing area.

Then link the conveyor belt and other equipment one by one, so that the base is basically formed.

The various materials are then transported in and stacked in the material area according to different positions.

With a slight collision, the door at the exit slowly closed. In this huge space, only Zhou Yu is left. As for Tina, they are either not interested in machining, or they have their own things, and no one comes to join in the fun.

Zhou Yu walked into the main control center: "Nuwa No. 1, test the equipment, and debug the links between the devices." ”

"Good master."

An illusory but clear figure, accompanied by a sound, slowly appeared in the air.

This is a projection of Nuwa No. 1, a little Chinese girl who looks no more than seven or eight years old. White skirt and double ponytails, pure and cute.

Throughout the underground space, a buzzing sound began to emanate. The conveyor belt is circulating, and the industrial machine tool, metallurgical furnace, and automatic mechanical production and processing line are all started.

According to the program written by Zhou Yu, Nuwa No. 1 quickly coordinated and debugged the equipment, and it was completed in just a few minutes.

"Master, the equipment is debugged. Is the next item to build industrial robots? ”

She has considerable thinking skills.

"Yes, Nuwa One." Zhou Yu bowed: "Now, start the first manufacturing task, industrial robots." Type: Handling. Quantity, ten. ”

"Please prepare the materials to be transported."

Nuwa No. 1 Road.

Zhou Yu nodded and walked out of the main control room.

Now, there is only Zhou Yu in the labor force. The handling and transportation of raw materials needs to be completed by Zhou Yu. That's why he built a handling robot in the first place.

Taking off his coat, Zhou Yu stood in the material area, surrounded by various metal materials. Gold, silver, copper, iron, and so on.

Subsequently, Nuwa No. 1 issued various instructions.

Zhou Yu obeyed the instructions and transported the required various metal materials from the material area to the corresponding conveyor belt, transported to the metallurgical furnace by the conveyor belt, smelted various alloys, and then entered the industrial machine in the parts processing area through the conveyor belt, which was processed into various robot parts, and then through the processing production line for some subtle grinding or cutting and welding, it formed a perfect robot parts.

They are then transported by conveyor belt to the assembly area for standby.

Zhou Yu worked as a porter and was busy for four or five hours. He didn't stop until Nuwa No. 1 reminded him that it was time to eat.

After leaving the base to eat, he turned around and came back again, and continued to be busy.

The parts of the ten robots were processed in just one day. After dinner, Zhou Yu returned to the base and began to manually assemble the robot.

All the procedures, manufacturing methods, operation modes, and even their physical characteristics of these robots were made by Zhou Yu himself.

Therefore, the assembly, although it seemed a little jerky at first, but then it became more and more familiar, and soon, ten handling robots were successfully assembled.

These robots are not human-like robots, but they are very tall machines in fixed positions, each with four robotic arms, which will be fixed in a circular material area outside the load-bearing columns, which will be used to transport raw materials onto a conveyor belt.

After the ten robots were assembled, under the operation of Nuwa No. 1, they settled in the material area.

In this way, Zhou Yu was relieved from the identity of a porter.

But then, he was still not allowed to be idle.

"The second manufacturing task, assembling the robot. Quantity: 20 units. ”

Under the guidance of the fixed program transmitted by Nuwa-1, the ten handling robots in the material area began to handle various raw materials in an orderly manner.

"Nuwa No. 1, after completing the second task, smelt the corresponding types of alloys according to the thirty-eight alloy formulas in the program I entered for you, and use them to upgrade the equipment. Your mainframe, industrial machine, and metallurgical furnace all need to be upgraded to meet future needs. After the alloy is produced, the corresponding type of robot parts will be directly produced according to the corresponding ratio and according to the plan..."

With Nuwa No. 1 in full control of the base, Zhou Yu doesn't need to stay here and watch all the time.

I went back and rested all night, had breakfast early in the morning, and came to the base again.

At this time, last night's manufacturing task, twenty parts for assembling robots, all have been manufactured, and in the parts processing area, many metal ingots of various alloys have been stacked.

Zhou Yu said hello to Nuwa No. 1 and began to assemble it manually.

After the first assembly robot was successfully assembled, Zhou Yu was liberated.

The assembly robot, as the name suggests, is mainly used for assembly. The robot has completely approached the human form. It's just that there are four arms, just like the previous handling robot.

In the main program of this robot, a variety of assembly programs are entered, and only one command is needed to swap out the corresponding assembly program to assemble various types of equipment.

The ability of robot assembly is not stronger than Zhou Yu, but people have four arms, the program is fixed, there is no distraction, and the assembly speed is fast.

In just half an hour, the other nineteen assembly robots were all successfully assembled.

At this point, Zhou Yu's preparatory work has been completed.

He came to the main control room and began to give orders: "Nuwa 1, now start producing robots for the corresponding type of work, and upgrade the equipment to prepare for the construction of spaceships." The corresponding manufacturing procedures, you coordinate, how to do it appropriately. ”

"Good master."

At this point, Zhou Yu can completely let it go.

The spaceship is Zhou Yu's original intention to build this underground base and create Nuwa No. 1.

There are no real spaceships in the world yet. Because of many limitations, this kind of transportation that rushes out of the planet and crisscrosses the sea of stars is still only imagined.

Whether it's a rocket, a satellite, or even a space station, it's far from being compared to a real spaceship.

A real spaceship, to cross the planet, the first one, has quite high requirements for materials.

The spacecraft must be fast, and the third cosmic speed is only the most basic speed parameter. And this data is far from meeting the requirements of a real spaceship.

The third cosmic velocity is only able to get rid of the gravitational pull of the sun, but in the vast cosmic sea of stars, the speed of more than ten kilometers per second is insignificant.

For example, Zhou Yu's spacecraft is preparing to go to Jupiter, and the closest distance Jupiter has to Earth is 630 million kilometers. At the speed of the third universe, it will take more than 30 million seconds, more than 10,000 hours, and more than 400 days to reach Jupiter! One round trip, that's eight or nine hundred days, nearly three years!

And the distance between the Earth and Jupiter, in the whole universe, is nothing.

So a real spaceship has to be fast. Otherwise, once the distance is far away, people will take a spaceship and arrive somewhere, and before they arrive, they will die of old age.