In the workshop where the six-axis linkage CNC machining machine tool is installed, except for Ning Yu, who has the key, only Han Ming's company has one left in case of emergency, and the others do not have the key.

Therefore, the processing raw materials that Han Ming had sent over before were put in the cart at the door of the workshop, and when Ning Yu opened the door, Han Ming also pushed the cart and followed behind.

Because it was only a sample, the number to be processed was not much, and there were only two pieces, so there were not many materials, and it didn't take much effort for Han Ming to push the cart.

Ning Yu has seen it before, the parts that need to be processed are not large, but the shape is a little complicated.

If it is a general processing machine, it is estimated that a special fixture must be designed to process it, but if it is placed here in Ningyu, it is not needed at all.

Those fixed manipulators can complete all kinds of clamping, and the control system is automatically adjusted according to the three-dimensional model drawing, so Ning Yu doesn't have to worry about it at all.

The two entered the workshop, Ning Yu started the machine tool, and Han Ming put the two pieces of raw materials in the raw material tank.

Start-up, debugging, input 3D model drawing, set the processing required accuracy, and processing data.

After a whole set, Ning Yu took less than five minutes, and the speed was not slow.

After everything was ready, Ning Yu switched the system to passive, and then, walking to the side, he and Han Ming silently watched the machine start to move.

Grabbing raw materials, manipulator fixing, high-speed cutting, seamless tool change, heat treatment, finishing, all in one go.

"I really envy you."

Han Ming, who was silently watching all this, suddenly said out loud: "This kind of machine tool, I used to think about it in my dreams, I never thought that I would be able to see it with my own eyes one day, and it is very likely that I will not be able to see it when I die of old age." ”

"I didn't expect to see this kind of thing when I was in my early thirties, and as a dry machining person, I was very satisfied."

Ning Yu turned his head to look at Han Ming, and said with a smile: "Do you want to say that even if you die, you have no regrets?" ”

"How is that possible!"

Han Ming glared at Ning Yu and said, "I'm still young, don't curse me." ”

"Besides, when I see this kind of high-tech stuff now, I naturally want to see something more advanced.

If you want to say that there is no hope, forget it, but as the spokesperson of your organization, you will definitely have a lot of good things in the future, but I want to see a few more things.

It's not enough to just look at it, I'll have to get some to use it. ”

Ning Yu chuckled and did not answer.

"I really don't know when all the processing in the world will be automated, and no one will have to ......do it."

Han Ming sighed, looked at the machine tool in front of him, cut the raw materials out of the outline of the parts little by little, and then slowly formed them.

"Not far."

Ning Yu replied with a smile.

"Seriously, watching this thing do all the work on its own, it feels more and more unreal, especially when I think about the busy scene of the workers in my factory."

Han Ming sighed: "The contrast is too obvious, the gap is too big!" ”

Ning Yu smiled and said nothing.

He is a black technology, Han Ming's machine tools, it is just the current world's general processing machine tools, how can it be compared?

The technological content is not at the same level at all.

"Uncle, have you ever thought about transforming your company?"

The two were silent for a moment, and Ning Yu suddenly asked out loud.

"What?"

Han Ming turned his head: "Transformation? ”

Ning Yu replied: "Well, transformation. ”

"It's easy to say."

Han Ming shook his head and said with a wry smile: "Not everyone who does anything is the same, which one is bent on making the company grow and develop, who would be willing to stagnate?" ”

"You mean to move the processing company in the direction of product production, right? It's that simple. ”

Han Ming said: "To be honest, when your grandfather handed over the factory to me, it was just a processing workshop with seven or eight old machine tools and one or twenty workers, half-dead.

In a few years, I have been able to develop it to this point, which is already very good, and this is because I have a lot of friends who support me. ”

"I also fantasize that one day I can develop the company into a large company integrating design, development, manufacturing, and sales, but I just think about it."

"If you want to develop to that point, capital, contacts, technology, and talents are indispensable, but I don't have any of them, and if you want to do it, how can it be so simple."

Ning Yu nodded, what Han Ming said was indeed the truth.

Every industry is like this, especially the machinery industry, as an old industry, if you want to develop and grow, how can it be so easy?

The high-end market is almost monopolized by those manufacturing giants, and ordinary companies are not qualified to compete with them at all.

Funds can't compare, technology can't compare, talent can't compare, what can compete with them?

General machinery manufacturing enterprises rely on the production of some low-tech, but high-demand mechanical products to survive.

There are millions of precision machinery at every turn, and small companies can only think about it.

"Uncle, you will definitely not be willing to be attached to your company, just a workshop that helps others process parts."

Ning Yu turned his head, looked at Han Ming, and said, "Do you want to make the company bigger and have your own products?" ”

"Nonsense!"

Han Ming didn't think about it, so he answered.

Who is willing to process parts for others all their lives?

Who wouldn't want to have their own product?

It's like writing a book or making a movie, who doesn't want to write their name in the column of the author and director?

"If you want to, then you can get ready."

Ning Yu smiled and said, "It won't be long before you can sit down." ”

"You mean really?"

Han Ming was stunned for a moment, then suddenly jumped up, stood in front of Ning Yu, and asked excitedly, "Can you help me?" What technologies does your organization allow you to hand over to others? No problem? ”

Ning Yu chuckled, looked at Han Ming, who looked excited, and said, "Uncle, why are you so excited, sit down." ”

"I told you, my organization is dedicated to scientific research, involving all aspects, think about it, how terrifying is the amount of technology they have accumulated over the decades?"

"Since they have decided to show their research results to the world, they naturally don't care about any technology leaks.

All they care about is how much material they need for their research. ”

"And my ability to do so alone is not enough to make my company involve all sides, after all, there are thousands of products in the world.

Therefore, I will inevitably find some trustworthy people, share some technology, and then help me earn money in exchange for resources.

And the people in our organization, they certainly don't have a problem with this, they only care about research resources. ”

"I think it won't be long before people in the country will notice me.

Once I've passed the test and solved the problem, even if they don't look for me, I'm going to start making moves and growing my company. ”

"When it reaches a certain level, I will definitely set up a group company, and then set up various subsidiaries under it to be responsible for all aspects of business.

When the time comes, you will put the company under the name of our group, I will hand over some technology to you, and then you can hand over a part of the profits to the head office of the group. ”

"With the energy of our organization, and those technologies, our group company will definitely develop into a giant, and you shouldn't have any problem hanging your company under its name, right?"

Hearing this, Han Ming immediately nodded: "Of course there is no opinion!" ”

"That's fine, you should prepare as soon as possible, it shouldn't be too long."

Ning Yu said, looked at the machine tool in front of him, and said, "Okay, the processing is complete, let's go over and take a look at the sample." ”