Kathu stood in the air, a relatively safe pipeline.

The heavy robots below had already pulled out of formation, and Kathu looked at their formation, and already vaguely guessed what they were going to do. So Kathu hurriedly looked around, planning for the way to go. Because once it lands, the overwhelming saw gear crushing formation can't be dodged.

As Kathu looked around, he noticed that the robot killer on the ground had been cut to pieces, and Kathu looked at the broken mechanical limbs and thought to himself, "It seems that they are not indestructible!" ”

So Kathu had an idea.

At this time, the heavy robot that squatted down at a lower height, the saw gear behind it increased its speed and spun. The two heavy robots in the back, directly from its back, took off the spinning saw gear and threw it directly at Kathu.

Fortunately, Kathu had expected that the system of these bulky guys was not low-end, and Kathu ran quickly in the air along the pipe, and the high-speed spinning saw gears flew behind Kathu one after another, and cut the pipes, and pierced into the ceiling, but the ceiling seemed to be not as hard as the surrounding walls, and the saw gears were almost all stuck in it at once.

Dense deadly rotating gears kept flying, and Kathu had already rushed to the top of the three robots before the pipe hit the ground. By the time the pipe fell to the ground, Kathu had already jumped in front of the heavy robot. I saw that the two heavy robots behind them, who had already thrown their eyes in a hurry, did not scan again at all, and directly attacked.

The heavy robot in front of Kathu was innocently cut to pieces by the red-eyed guy who killed him from behind. Kathu quickly dodged the oncoming sawgear. After bypassing, an arrow rushed to the middle of these two heavy robots, the electronic program of these two heavy robots has completely failed to give Kathu's thoughts and movements, can not calculate, can only blindly grab out the saw gear from behind, and slash at the Katu in front of him, Katu's vigorous skills, safe and sound, dodged the attack of these saw gears that will be cut in half once sawed.

And these blind attacks caused the two heavy robots to kill each other, and they both sawed each other's mechanical limbs, and Kathu jumped to the side and rolled out, dodging the deadly attacks of the two heavy guys.

With the sound of steel clashing and rubbing, the two heavy robots also collapsed, and many wires were exposed, and it seemed that their design and programming were indeed much more complex than the previous one.

The entire workshop had been shattered from a mess to a dilapidated state, and Kathu went back to pick up the special toolbox that had been thrown aside, looked back at the broken heavy robot that was dancing with sparks, and smiled triumphantly.

But there was a crackling sound on the ceiling, and Kathu looked up—the sawgear had pierced the ceiling, sparks spilling from the cracks that had been pierced.

Kathu looked down the pierced crack again, and it looked like it was actually an electromechanical room, and the large number of aggressive saw gears should have destroyed all the equipment in the electromechanical room above, and the equipment on it continued to eject sparks, and some of the equipment even made an explosion sound.

"Oh! No! This is a big disaster! Gotta find Lloyd! Kathu picked up the toolbox and ran quickly, jumping over the sawn heavy robot. The exit is just around the corner......

At this time, Lloyd had been taken by the Iron Hook into another secret processing workshop, why not call it a workshop, because it was really a workshop.

Lloyd felt a loud tremor just now, and guessed that it must have been Kathu's work of a guy who was in a hurry.

Lloyd grabbed the hook and shook his head, feeling that the next action could no longer be a covert operation.

It's a horrible workshop, and the staff below are all wearing special white isolation gowns and wearing a hood like a gas mask on their heads. The workshop is like a production line, and the people in it are busy processing something by hand.

Since Lloyd was on a high place, the people below were working intently, and no one noticed that an intruder would enter with an iron hook from a high place.

Lloyd jumped down behind a more secluded box and hid behind it, surveying everything in the workshop.

I saw these staff members in white isolation suits, holding steel-like objects in their hands, and then processing those rotten bones and arms, seemingly preparing to add a layer of mechanical shell.

"What's this line of thinking?!" Lloyd hid behind the box, pondering calmly, because everything was strange all the way, and they certainly weren't just trying to do an experiment to produce a result.

In the hands of these busy workers, they work extremely efficiently, but it can be seen that the matching rate of the finished dry bone robotic arm is only about 1 in 1,000. That is to say, as far as the eye can see, there are basically few workers who can make this dry bone robotic arm.

If they can't make it, they will quickly pack it into white fabric, and then when a round of iron hooks comes, they will hang these defective products on the iron hooks, and then the iron hooks will carry these defective products out of the mouth of the machine. All the defective products in the ditch should have come out of here.

In addition to the dry bone mechanical arm, there are also various parts of the limbs - heads, thighs, calves, etc., are all being assembled in full swing, and the probability of failure is extremely high.

One of the men, dressed in a conspicuous black isolation suit, was holding a folder in his hand, on which he was constantly taking notes, and it looked like he was drawing with a tick and a cross.

"This person may be a breakthrough." Lloyd thought to himself, moving along the back of the box, trying to get closer to the man in the black isolation suit.

As he walked along the back of the box, Lloyd tugged at the cloth covering the box and saw the contents of the box.

Lloyd grabbed a piece of material from the box and looked at it carefully: "Isn't this titanium?!" This is no ordinary material! It is mainly used to make parts of aircraft engine compressors, followed by structural components for rockets, missiles and high-speed aircraft. ”

Lloyd looked at the titanium alloy in his hand, and quietly looked at the workers in the workshop.

"This workshop can't be a missile rocket maker, or an airplane. So what are they going to do with this titanium alloy!? Lloyd thought as he thought of the chamber in front of him, which was filled with skeletons and corrosion.

Lloyd's eyes widened, did they want to use titanium alloy......