More than a dozen workers dispersed and walked briskly to the door, they also wanted to finish the preparations quickly, and then watch the work of this machine tool that they had never seen before, which looked very tall and domineering.

Most of them are old workers who have been doing machinery manufacturing work for 20 years, and have seen the changes and ups and downs of the machinery industry over the years, and they have seen a variety of mechanical product processing machine tools, whether they are simple or high-precision, they have seen a lot, but like Ning Yu, a big guy, the volume is huge, but the details are extremely exquisite, and they have never seen it.

But anyone can see that this machine is not simple.

Thinking of what Ning Yu said to them when he first came here two days ago, the workers' hearts were hot, and they worked harder and harder.

On Ning Yu's side, when Ning Yu handed the thin instruction manual to Lin Gang, this middle-aged man in his forties who was very calm on weekdays trembled a little.

He swallowed, his hands trembled, and he didn't dare to reach out to answer the instructions for a long time.

"This ...... This, Mr. Ning, I ...... Can I do it? ”

Lin Gang looked at Ning Yu a little vainly, he felt that at this moment, his pressure was too great.

Although he doesn't have any processing skills in his hands, his processing experience and insight are the best and most stable among the more than ten workers.

Because of this, he was appointed by Han Ming as the leader of the workers here in the old factory, and the workers all obeyed him.

Originally, Han Ming wanted to take him to the new factory, after all, a master with stable processing, rich experience, and extensive knowledge was also a rare talent, but because the workers here had to be managed, he had no choice but to leave him here.

This also fully shows that Lin Gang's ability is worthy of recognition.

And he himself is also very confident in his ability to operate the machine tool.

But at this moment, he was empty.

An hour is too short, this seems to be a very advanced machine, in his opinion, he should be familiar with it for a long time, and after many attempts to process it, he can start to take charge of the machine.

From Ning Yu's words, he could probably guess the importance of this order, and Ning Yu recalled them urgently, but he was afraid that time was also very urgent.

He suddenly felt a lot of pressure, and in an hour, can he get familiar with this machine tool and operate it well?

For a while, he flinched a little and didn't dare to take the instruction.

Seeing Lin Gang's hesitation, Ning Yu could roughly guess his psychology, smiled slightly, and stuffed the manual into the other party's hand.

"Master Lin, you don't have to be afraid, with your years of operating experience and insight, you are fully qualified for this job, and I think an hour is more than enough."

Lin Gang smiled bitterly, and just wanted to speak, Ning Yu waved his hand to interrupt him and said, "Don't think about it, I'll give you a rough overview of this machine tool and what you need to do.

Lin Gang nodded.

Coughing lightly, Ning Yu said: "This machine tool is a six-axis linkage ultra-high-precision CNC machining machine tool, which can almost achieve complete automation with its own program, that is to say, there is not much work you need to do."

"Before starting processing, what you need to do is to import the three-dimensional part drawings and three-dimensional assembly drawings that need to be processed into the machine tool control system, and then set the processing parameters according to the order requirements, after completing these, the machine tool control system will automatically set a reasonable processing program according to the processing situation."

"After that, what you have to do is to direct and arrange other workers to move the raw materials to the designated location of the machine, you just need to confirm the start, and the machine will automatically start processing."

"During this machining, all processes are automatically completed by the control system to control the machine tool, no human assistance is required, you only need to supervise the machine during the machining process, if there is an error, modify it according to the prompts. When machining is complete, you direct others to take the part out. ”

"That's about it. Now, do you have any questions? ”

Lin Gang kept his mouth open in the process of listening to Ning Yu, his expression was stunned, after Ning Yu finished speaking, after a while, he came back to his senses, looked at Ning Yu, and subconsciously asked, "This is the end?"

"It's over."

Ning Yu nodded.

Lin Gang looked shocked, and after a while, he stammered and asked, "Mr. Ning, I'm ...... All I need to do is ...... That's it? ”

"Yes."

"Import the 3D model, set the machining parameters, and watch the machine process itself, and that's it?"

"That's right."

"This ...... This ......"

Lin Gang was directly stunned, not knowing what to say.

At this moment, he is like a person who has always thought that the bicycle is the fastest means of transportation, and suddenly sees the sports car speeding by, and the mood that the world view is about to collapse makes him unable to calm down for a long time.

"Okay, don't waste time, let's take a look, if there is anything I don't understand, ask me."

After Ning Yu finished speaking, he walked to the desk on the side, pulled out a chair and sat down.

Han Ming, who was sitting opposite, raised his head: "The matter is finished?"

Ning Yu nodded.

"Although Lin Gang is a good person, calm and experienced, but this order is very important to us, so you can rest assured that he will take the helm?" Han Ming asked.

"It should be fine." Ning Yu pondered for a moment and replied slowly: "My company always has to develop, and the machine tool can't always be like this, there will always be more and more." These people have rich processing experience and can use them in the future, so let them go into battle now, and it should be trained in advance. ”

"You're really calm, not afraid of problems."

Han Ming shook his head with a smile and said, "You know, we don't have much time, don't make a mistake when the time comes."

"Don't worry, I know it." Ning Yu said confidently.

"It's good to have a number." Han Ming also knew that his nephew had always been very stable in his work, so after mentioning it, he didn't say it anymore. He lowered his head and played with his phone.

Time flies, workers come in and out, and the raw materials are constantly transported to the machine not far by rail cars, piled up together.

On Lin Gang's side, he first took a cursory look at the manual twice against the actual machine tool, and then began to read it carefully, and if he didn't understand something, he immediately came over to ask Ning Yu.

After Ning Yu drew this machine tool, there was a detailed and complete information of the machine tool in the APP, and those information were by no means comparable to the ultra-lite version in Lin Gang's hand, and he had carefully studied it many times before in order to have a full and sufficient understanding of this machine tool.

Therefore, the question asked by Lin Gang was answered by him almost without much thought, without a bit of sluggishness.

Because of this, Lin Gang felt that his new boss had become more and more mysterious.

An hour passed quietly.

Just ten minutes ago, the workers will process all the raw materials to complete the handling, at this moment more than a dozen people, are around the machine tool in twos and threes, talking in a low voice, judging the taste, from time to time there are exclamations and exclamations.

Lin Gang started trying to operate half an hour ago, and there were several people standing behind him, quietly watching him operate, their eyes full of envy.

"Master Lin, have you imported the 3D model of the part, and have all the processing parameters been entered?"

Ning Yu looked at the table below, got up and walked to Lin Gang's side, and asked out loud.

Seeing Ning Yu get up, the workers around the machine stopped talking, consciously walked in front of Ning Yu, and lined up neatly.

"Mr. Ning can rest assured that the three-dimensional model of the parts has been imported into the control system and stored, the processing parameters have been entered, and the processing can be started at any time after multiple checks!"

Lin Gang replied loudly, after an hour of understanding and trying, he was full of confidence in mastering this machine tool at this time.

At this moment, he looked excited, and it was his honor to be able to use this machine tool himself.

"Let's go!"

Crash!

With Ning Yu's order, more than a dozen workers dispersed in an instant, each doing their own thing according to the task assigned by Lin Gang, and everything was in order.

Lin Gang took a deep breath, stabilized his trembling hands, and turned off the machine tool protection button.

After pressing the start button, the indicator lights of the six independent machining spindles are lit up, which means that they are all running normally and ready to start machining.

At the same time, the raw materials that are placed in a fixed position by the workers, that is, large steel blocks, are firmly grasped by the outstretched manipulator and placed on the processing table.

After a while, a slight sizzling sound sounded, and the machine began to process.

In the factory, there is a busy scene in full swing!

After the machine began to work, six independent machining centers, each with their own manipulator, clamped the steel block to the processing table to complete the fixation, after which the transparent protective cover rose and enveloped the processing table. At the same time, the spindle begins to rotate at high speed, and after laser positioning, the machine starts machining at a very fast speed.

In the machining process, the spindle can not only rotate freely in all directions and be processed from different directions, but also the table of the fixed parts is constantly moving and cooperating with the spindle for processing.

The machining speed of the machine tool is extremely fast, the spindle of ultra-high-speed rotation is matched with the extremely fast running speed, and the raw materials are constantly cut, and in just half a minute, the complete steel block is processed out of the approximate outer contour, and the people outside can easily see the appearance of the processed parts from this contour, which is a complex part, and the shape is extremely non-standard.

In other words, it is an extremely difficult part to machine. But this machine machine, processing the outer contour of such a part, actually took a little more than half a minute.

The workers outside were dumbfounded, including Lin Gang, who was stunned for an instant.

Even Han Ming, who knew that this machine tool was powerful and had personally studied it for several hours, his eyes widened and he was speechless.

After the outer contour is processed, six independent machining centers, in the eyes of more than a dozen workers, each stretched out the cutterhead, the cutter on the cutter head rotated at high speed, the speed was consistent with the spindle speed, in the exclamation of all the workers, the tool change was completed in an instant!

All the workers looked at each other, not knowing what to say.

"This ......"

Han Ming swallowed his saliva and looked at Ning Yu: "I still think that such a machine tool, placed on the side of the new factory, can play its greatest role." So, Xiaoyu, or you'll ......"

"Don't even think about it!"

Ning Yu directly interrupted Han Ming's words.

Han Ming's thoughts, he was clear, he wanted to move this big guy over? Don't even think about it.

Han Ming, who was rejected without hesitation, looked at Ning Yu with an aggrieved face, and the look in his eyes made Ning Yu goosebumps all over his body.

Still, he remained unmoved.

Seeing this, Han Ming shrugged his shoulders helplessly, and turned his gaze to the machine tool.

After the tool change, the machine starts drilling holes in the outer contour and then changes the tool again for internal machining of the part.

In less than two minutes, the outer contour and the inner part of the part were machined.

The spindle stops spinning, and the manipulator places the part into a square groove, which then begins to spray blue fireworks and begin to heat treat the part.

At the same time, the manipulator begins to take a new steel block from the raw material tank, and according to the processing process designed by the numerical control system, it starts to process quickly again.

All of this is in order, and it is extremely fast, and people are stunned to watch.

Han Ming finally knew at this moment why Ning Yu said so confidently that within one day, he could complete all the parts of the order.

It took his machine tool more than thirty minutes to process such a part, but here Ning Yu, it took less than three minutes!

The gap is just too big!

Ning Yu smiled and looked at Han Ming, who was stunned beside him, and said with a smile: "Uncle, believe it now, how about it, are you satisfied with this speed?"

Han Ming's chick pecked rice and nodded, and he took his eyes off the machine with difficulty.

As he spoke, the machine tool completed the second set of parts processing, and the first group of parts that were being heat treated just now have also been processed.

Instead of immediately starting to process the third set of parts, the machine takes out the parts of the first group and starts to process the heat-treated parts again.

In less than a minute, the machining is completed, and the manipulator puts the machined parts on the conveyor table, and then the machine controls them to the finished product tank.

The total processing process of a part, including the first processing, heat treatment, and the second processing, from the blank to the finished product, takes only six minutes.

In other words, in one hour, each individual machining center can complete ten parts, and six is sixty.

The speed is unprecedented!