With the acceleration of the machine, even Xia Ying couldn't sit still, in order to ensure the stable operation of the SA400, the factory used to limit the speed of the machine to below three hundred, but the current speed does not look like three hundred! It should be a little higher.

Xia Ying walked to the screen of the console and couldn't help but gasp, "! Xia Ying rarely burst into foul language, and the screen clearly showed three hundred and five, which was a speed that the factory never dared to mention!

The machine was running smoothly at high speed, the turret could no longer be seen clearly, only the blurry image left by the high speed remained in Li Zhongwei's retina, and he remembered Lin Mo's words at the moment, "As long as the rhythm is not disrupted, then there is no need to worry." ”

The downstream process was a bit of a rush, and they had never experienced a workload of up to 350 bags per minute, and they even held back their sweat for a while.

"It's too fast! I can't see the movement of the machine clearly, it's perfect! ”

"I can't see clearly, but I think the rhythm is like music, and that's the beauty of machinery!"

"Have you noticed, from the beginning until now, there hasn't been a single bad product, and none of the putters have worked."

Just as they were talking about the absence of bad products, the electromagnetic clutch engaged, and then drove the rejection actuator to knock a pack of bad products out of the turret, which made everyone breathe a sigh of relief.

"I thought this Lin Mo was so cowy! It turns out that he is also a mortal! ”

"That is, there are no bad products for half a day, and we have never been so good in the new machine in our factory."

"If you can reach a bad product rate of less than 1 in 1,000, you are a master, and now the bad product rate is still below 1 in 10,000, so you have to look at the actions behind."

Li Zhongwei grabbed the defective products in the scrap box, he took a closer look, grinned, and then he threw the bag of defective products to Lin Mo.

Xia Ying hurriedly leaned over and watched with Lin Mo.

"Ahh It turned out to be a problem with the material! Xia Ying's face was almost smiling chrysanthemums.

The packaging paper of this package of defective products has flying angles, and then it is sensed by the photoelectric sensor, which immediately sends a signal to remove the defective package through the push rod.

When this package of defective products was passed on by everyone, the knockout putter moved again and beat out a package of defective products.

"What's it this time again?"

"It's not going to be the wrapping paper again, is it? In that case, the people in the supply department will be out of luck. ”

Li Zhongwei didn't look at it, so he threw the defective product to Lin Mo's side, he is now very confident, and he has great expectations for the authenticity of the machine.

There are more people gathered around this time, and everyone wants to see how the assembly line after the repair is done.

Without waiting for Lin Mo to pick up the defective product, Xia Ying took the lead and brought the defective product to his eyes.

"The raw material is deformed."

Xia Ying's words made Li Zhongwei smile proudly, this is the best praise for the work of his master Lin Mo, this kind of achievement cannot even be reached by the packaging factories in the province, which shows Lin Mo's skills.

"I'm convinced! The level of the forest worker is stronger than the two foreigners when the new machine is debugged, we used to spend money in vain, I knew that the forest worker had such a level, so why spend foreign exchange to invite those foreigners who like to flirt with female workers? ”

Here is another story, when SA400 first arrived in the factory, two young Italian people also followed to the factory, their food and drink are of course all-inclusive in the factory, but these two ghosts are probably full of warm thoughts, so they went to tease the female workers in their free time, pulled the female employees' collars apart, and obscenely went to see the scenery inside, but unfortunately the female employee was very fierce, and gave the ghost a slap on the spot, and afterwards she was praised by Xia Ying, saying that she maintained the face of the Chinese people, However, the factory had no choice but to warn the Italian who committed the crime.

Just when everyone was surprised by this speed, Lin Mo walked to the side of the power distribution cabinet again, and with a tap of his finger, he increased the speed to three hundred and nine.

The sound of the clip slapping the mold box suddenly increased, but there was still no other noise, and the machine was still running steadily.

Xia Ying was standing on the edge of the machine, the turret was already an afterimage, the cooperation of various mechanisms was difficult to see, and the rhythm of various sounds was very strong.

This is the real level of this assembly line! Xia Ying felt that her eyes were a little moist and hot, and this assembly line did not play a complete level after it arrived in the factory, probably because the manufacturer also needed word of mouth, so the speed of the new machine was set at three hundred when it was debugged, and three hundred and five was never there.

The machine kept spinning, swallowing the raw materials into its own interior, and finally spit out the perfect finished product, and by this time many people had gathered outside the barbed wire, and everyone was attracted by the slight and rhythmic sound.

"Xia Chang, the time for the meeting is coming soon, you see..."Xia Ying's secretary reminded in a whisper in his ear, but unfortunately Xia Ying ignored it.

Xia Ying looked at the assembly line intently, and said casually: "Tell them to drive it themselves, what is there to open in this production meeting, as long as this assembly line can run smoothly, then production is not a problem, let them report to me later!" ”

"Report the temperature of each cabinet." Lin Mo held a notebook in his hand and said calmly.

Except for Li Zhongwei, the other three people all ran to those large and small boxes with thermometers, which were all some deceleration mechanisms and transmission mechanisms, all of which were soaked in N680, and had been running for more than an hour now, and it was time to check the temperature.

Temperature and failure are closely related, if the mechanism is working well, then the temperature of the box will not be too high; If there is a problem with the mechanism, then the temperature of the box will rise in a straight line under the resistance.

The thermometer that had been prepared long ago was inserted into the oil level hole to measure the oil temperature directly, and after ten minutes, the results came one after another.

"Thirty-five degrees of the main cam box."

"Thirty-eight degrees of gearbox."

"Twenty-six degrees in the oil pump tank."

"Thirty-nine degrees to drive the box."

………

With the voice of the report, a smile appeared on Lin Mo's face, and he said to Xia Ying: "It seems that the mechanism is cooperating very well, otherwise the temperature of the box must reach at least forty degrees or more, if the assembly is not good, it is common to have more than fifty degrees, and even seventy or eighty degrees." ”

Xia Ying nodded, he knew that if the operation of the machinery was not smooth, then the transmission system would run hard, and the oil temperature would rise rapidly.

"Stop the machine and check the temperature of each rotating bushing."

Lin Mo's professionalism gave everyone a deep impression, these inspection contents are all they have not seen, it seems that some items will be added to the acceptance in the future.

The inspection of the shaft sleeve is not a thermometer, but all by feel, immediately Lin Mo asked a few people from the equipment department to go up to check, if they feel that the temperature is too high, put it forward, and then everyone verifies it together.

Wang Tao held back for a long time, and then he had the opportunity to come forward, and he immediately shouted, asking everyone to check carefully, and must check the problem, otherwise it would be a dereliction of duty in the equipment department.

Lin Mo smiled, he was not afraid of Wang Tao's self-exertion, he nodded at Li Zhongwei, asked him to lead someone to follow behind, and then checked the truth.

The staff of the equipment department began to inspect under the hint of their boss, but will the machine that Linmo debugs give them a chance? It's obviously impossible, plus Li Zhongwei and they are eyeing each other, if you want to refer to the deer as a horse, someone has to believe it!

"Normal."

"Normal."

"Normal."

…….

"The temperature is super high, the temperature of this shaft sleeve is super high, Wang Ke, come and see, the temperature of this shaft sleeve can boil eggs."

An employee of the equipment department shouted excitedly, today Wang Tao said that as long as the person who checks out the problem can get the opportunity to be promoted, in this kind of factory, the leader's words are generally to be honored, otherwise who will listen to him in the future.

Wang Tao's eyes lit up, he glanced at Lin Mo proudly, and then ran to the person's side, stretched out his hand, and a wanton smile suddenly appeared on his face.

"Xia Chang, you also come to touch it, it is estimated that you can eat hot pot here!"

Wang Tao's exaggerated description made Xia Ying's face ugly, even if there was a shaft sleeve with a high temperature, it was just a small flaw! You just keep an eye on it, and wait for Lin Mo to change the shaft sleeve and see what you say.

Seeing Xia Ying walking over with some reluctance, and then looking at the position of the shaft sleeve, Lin Mo smiled, he ignored Li Zhongwei and their worries, and smiled very easily.

"It's hot!" Xia Ying felt the heat as soon as he touched it, he looked back at Lin Mo, but the chuckle on Lin Mo's face made him a little confused, what's wrong? Didn't Lin Mo care about these criticisms?

"There must be a problem with the cam box, Xia Factory, this problem can only be checked by opening the cam box!" Wang Tao now feels that the sky is immortal, and Lin Mo's middle cultivation is perfect, but this flaw has been caught by himself, now it depends on what you say.

"Lin Gong, this..."Xia Ying walked to Lin Mo's side with a blue face, this kind of flaw is not to say that it is a medium repair, even a major repair is inevitable, and it is more than that, but now Wang Tao has grasped this problem, if he forcibly passes, the echo in the district will probably not be too good.

"Are you stupid?" At this time, Lin Mo was no longer taboo about revealing the contradiction between him and Wang Tao.

Lin Mo walked to the side of the shaft sleeve, then pointed to the iron box under the shaft sleeve and said, "There are two electric soldering irons in here, you probably don't know, right?" ”

"Li Zhongwei!"

"Master." Li Zhongwei was worried about Lin Mo just now, and now Wang Tao's face and mouth are extremely disgusting, and he even has to catch this kind of normal flaw, so who else dares to get started? So his head was hot, and he called him master without Lin Mo's consent.

"Haha!" Lin Mo did not refute Li Zhongwei's title, now is the time to look at people, only Li Zhongwei firmly supports himself among the four young workers, so why not accept him as an apprentice.