"What are you laughing at? This Zheng squad leader has already measured the value and is qualified. What else do you have to say www.biquge.info Che Wencao sneered on the side.

Li Xiang didn't pay attention to him, and said to Zheng Bingshen: "Squad Leader Zheng, please bring your inner diameter dial gauge to me to see." ”

Zheng Bingshen was very dissatisfied with Li Xiang's suspicion that there was a problem in the test before, glanced at Li Xiang, and said, "Director Li, don't you suspect that there is also a problem with this inner diameter dial gauge?" ”

Mu Zhongyue frowned, he was very dissatisfied with Zheng Bingshen's performance in his heart, and shouted lightly: "Take the inner diameter dial gauge to Director Li and see what the problem is!" ”

Mu Zhongyue's words, Zheng Bingshen didn't dare not listen, after all, it was his direct leader, so it was better not to offend.

Li Xiang smiled slightly, took the inner diameter dial gauge handed over by Zheng Bingshen, pretended to check it very seriously, and smiled slightly.

Mu Zhongyue looked at Li Xiang's expression and asked, "Director Li, do you see something wrong?" ”

"What could be the problem? This dial indicator can be sent for inspection on schedule. Zheng Bingshen muttered quietly.

Although Zheng Bingshen's voice was small, Li Xiang still heard it, and said with a smile: "Squad Leader Zheng, please rest assured, there is no problem with this inner diameter dial gauge." ”

"I don't understand, what are we doing here, just listen to his nonsense here?" Che Wencao couldn't help but complain again.

Li Xiang smiled slightly and said: "Don't worry, don't worry, although there is no problem with this inner diameter dial gauge, it is not suitable for measuring the aperture of the bypass valve." ”

Che Wencao laughed when he heard this, and said: "This is really the funniest joke I heard today, you actually said that the inner diameter dial gauge is not suitable for these two apertures, haha!" ”

Li Xiang already had a sense of disgust for this Che Wencao, and snorted coldly: "Let's take a closer look, the measuring contact of this inner dial gauge can't measure the abnormal traces in the bypass valve aperture at all, so the results measured just now may not be accurate." ”

Hearing Li Xiang's words, Zheng Bingshen hurriedly went up to observe, and after looking at it for a while, he nodded reluctantly and admitted Li Xiang's statement.

Everyone saw that even the inspection squad leader agreed with Li Xiang, so naturally no one raised objections, and even Che Wencao was silent at this time.

Li Xiang looked at Mu Zhongyue again and asked, "Director Mu, does our Zhongji Company have that kind of inner diameter dial indicator with three claws." ”

Mu Zhongyue, as the director of the technical quality department, really didn't know much about these things, and Zheng Bingshen next to him hurriedly took over and said, "Yes, we have that kind of inner diameter table in the laboratory, but I don't usually use it much." ”

After speaking, Zheng Bingshen arranged for an inspector to take the dial indicator of the inner diameter of the three claws.

Li Xiang took the dial gauge of the inner diameter of the three jaws, looked at it, nodded, and personally measured the bypass valve aperture of the oil cooling filtration module next to him.

"Let's take a look, the orifice of this bypass valve has the phenomenon of an inverted cone." Li Xiang looked at the inner diameter dial in front of him and said.

In fact, Li Xiang doesn't need any inner diameter dial gauge to measure at all, only a pair of divine eyes can see the aperture of the bypass valve clearly, just measure it, so that everyone can believe it.

Li Xiang glanced around and continued: "The detection size of the upper end near the outer screw plug is 16.052 mm, but the size of the bottom end of the valve hole is only 16.018 mm, which is obviously small. ”

Seeing this result, everyone is discussing, no one thought that the problem would be here, although everyone is very unaccustomed to the quality of the Che Wencao of the quality department, but there are still many people who have the same idea as him, that is, they do not believe that the products of the Expo will have quality problems.

"Let's go check the inventory." Mu Zhongyue arranged.

Zheng Bingshen answered, picked up the three-claw inner diameter dial gauge and left.

Mu Zhongyue turned to Che Wencao and said: "Lathe, the reason for the quality accident in the market has been very clear, it is indeed not the reason of our Zhongji Company, I hope that the lathe worker will go back and truthfully report to your leaders, and I will also communicate today's situation with your leaders." ”

Che Wencao's face was very ugly, but fortunately, his skin was thick enough, and he said lightly: "Well, that's good, but you can't be loose and always maintain a sense of quality." ”

Mu Zhongyue, this young man really doesn't know how to advance or retreat, it seems that he needs to communicate with the leaders of the quality department.

"Then the turner should organize the materials well and go back and report." Mu Zhongyue said that the subtext was to give an eviction order.

However, Che Wencao had no intention of leaving, and continued: "I'm not in a hurry, isn't this squad leader Zheng checking the inventory?" I'm going to see the results of the examination. ”

Mu Zhongyue thought about it a little, and then understood Che Wencao's intentions, in the past, the quality department came to check something, and the company would arrange for a meal, so that some small problems would be pressed down and dealt with by themselves, and the meaning of this Che Wencao was also very clear, that is, to stay and eat.

Mu Zhongyue glanced at Che Wencao and said, "Oh, it's almost noon now, Li Xiang, after Zheng Bingshen comes back from the inspection in a while, the two of you will accompany the lathe worker to have a meal outside, after all, it is very hard for the lathe worker to come here for a trip, and take the invoice to me for reimbursement after the incident." ”

Li Xiang was a little speechless, this Che Wencao was so arrogant and rude, Mu Zhongyue even had to arrange to invite him to dinner, and let himself accompany him, it was really unpleasant, but the leader arranged it, and he couldn't disobey it, so he had to agree.

Seeing Li Xiang nodding in agreement, Mu Zhongyue found a reason to leave, he also looked at this Che Wencao and was not pleasing to the eye, and didn't want to look at him again.

"What? Do you want to invite this surnamed Che to dinner? The man next to him began to whisper.

"Why? If it weren't for Director Li, would he have been able to find out the real cause of the problem? What a rice bucket! ”

"If it weren't for Director Li today, this black cauldron, our China Machinery Company would have made a decision."

"Okay, don't talk about it, it's none of our business, we'll get off work right away, let's go."

The crowd gradually dispersed, and at this time, Zheng Bingshen also rushed back, and saw that only Li Xiang and Che Wencao were present, so he said: "Sure enough, as Director Li expected, there is an inverted cone phenomenon in the bypass valve holes. ”

Li Xiang nodded and said, "Okay, let's not talk about this issue for now, Director Mu arranged for us to accompany the lathe workers to dinner, wash our hands and go." ”

Zheng Bingshen felt very pleasantly surprised, agreed, and immediately went to wash his hands.

Then the three of them walked out of the park of Daxuan Power and came to the road outside the company.

"Turner, there's a beef plate noodles here that are quite authentic, why don't you just go and eat noodles?" Li Xiang said deliberately.

When Zheng Bingshen heard this, he couldn't help but roll his eyes secretly, and said in his heart, this Director Li is too picky, how can he invite someone from the quality department to eat noodles?

Sure enough, Che Wencao looked unhappy after hearing this, and said, "You're also stingy, aren't you?" Please eat noodles from me? I'm going to the auspicious hotel opposite, whether I come or don't come with you. ”

Just as Che Wencao turned around and walked across the road, Li Xiang suddenly opened his mouth and shouted, "Turner, don't move!" ”

Hearing Li Xiang's shout, Che Wencao pursed his lips, ignored it, and continued to walk towards the opposite side, but then he realized that a small truck was rapidly approaching him.

"Ahh

After the scream, there was a bang, and Che Wencao was hit by the pickup truck and flew out.

The pickup truck was too fast, Li Xiang had just reacted, and opened his mouth to remind Che Wencao, and then Che Wencao was hit by it, and Li Xiang didn't have time to save it.

After a while, blood was already flowing from under Che Wencao, who was lying on the ground, and Li Xiang knew that Che Wencao was dead.