Li Xiang looked at Guo Qilin's busy figure and nodded slightly, although this Guo Qilin likes to play tricks and likes to be lazy, but the technology in his hand is good. Pen, fun, and www.biquge.info

It is no wonder that in state-owned enterprises, a month's salary is basically fixed, and there is little change in doing more and doing less, so the enthusiasm of these people is not very high.

However, once the leader has special requirements, the people below are still very positive, after all, it is related to their future, even if they can't be promoted, they will be beneficial to themselves in the year-end evaluation.

It didn't take long for Guo Qilin to complete the adjustment work, took a piece of cotton yarn, wiped the oil stains on his hands, and Guo Qilin said to Li Xiang: "Director Li, I've adjusted it." You see, I added a block here, and when I was processing the second-generation machine, I put the block on it, and if I replaced it with an ordinary body, I could take it down. ”

Li Xiang stepped forward, looked at it, nodded, and said, "Very good, thank you, Guo Gong!" ”

Guo Qilin laughed and said, "Director Li, you are too polite, if you need anything in the future, you can just say it, aren't we just doing service work." ”

Guo Qilin's words made Li Xiang almost get goosebumps, this is too ambiguous, fortunately there is no one else now, otherwise there might be some gossip.

"Alright, there's nothing going on here, you can go and get busy with something else first." Li Xiang hurriedly said, for fear that this Guo Qilin was saying something shocking.

Guo Qilin naturally understood what Li Xiang meant, smiled and said, "Then Director Li, I'll leave first, if you need anything, just call my mobile phone." ”

Looking at the figure of Guo Qilin leaving, Li Xiang rolled his eyes, called Dong Xiaoming, and said: "Xiao Ming, in the afternoon, prepare a second-generation machine with unprocessed oil ducts, and prepare for trial cutting." ”

Seeing that Dong Xiaoming agreed, Li Xiang looked at the time, and it was almost noon, so he said: "Xiao Ming, in the afternoon, you will do the ordinary machine first, and when I come, I will try to cut the second-generation machine." By the way, take that stop down, and you can process a normal body. ”

After instructing Dong Xiaoming, Li Xiang left the workshop and returned to the office, and now the only thing to do is to wait for Zhang Dongxu to make the drill sleeve, then you can make a test cut.

Zhang Dongxu didn't let Li Xiang wait too long, and not long after he went to work in the afternoon, Li Xiang received a call from Zhang Dongxu, and the seven drill sets had been ready.

Li Xiang didn't expect it to be done so quickly, and then went east, this must be Zhang Dongxu did not rest at noon, and worked overtime to dry out these seven drill sets.

The last time Li Xiang asked Zhang Dongxu to do online measurement tooling, although the other party was also very cooperative, but there was absolutely no such enthusiasm, obviously, now almost everyone in the company, the attitude towards Li Xiang has changed.

Li Xiang sighed secretly, this is the reality, when he first came, who would put himself in his eyes, that is, the operator of the production line, and some yin and yang; But now, I accompanied the chairman to visit, which led to the cooperation between two large enterprises and made me a celebrity, and these people would like to be able to help them do something.

Li Xiang couldn't help but think of a poem he learned when he was in school: It is better to live ten years less than to be without power for a day; When the husband is obedient; One day, the sky will follow people's wishes; Saitian Wen has 3,000 guests!

It is for this reason that many people are now keen on the pursuit of power, which is actually not wrong, but some people are unscrupulous, even at the cost of breaking the law and committing crimes.

Of course, these are not Li Xiang's concerns, what Li Xiang needs to do now is to go to the fitter workshop to retrieve the drill sleeve and install it on the machine tool for test cutting.

Li Xiang decided to go to the fitter's workshop to get the drill sleeve first, but when he arrived, he found that Zhang Dongxu had made nine of them, and there were two more.

Zhang Dongxu looked at Li Xiang's somewhat puzzled expression and said, "I'm idle, so I'll make two more, and if there is something bad, you can use it instead." ”

Li Xiang was a little speechless, he remembered the last time he did online measurement tooling, but he didn't do much of it, this time he actually worked overtime to make two more pieces, and the gap between before and after was too big.

Li Xiang enjoyed this feeling at first, but now he felt very bored, and he didn't say anything at the moment, and left with the drill set.

Before coming to the oil channel hole processing machine tool in the machine body processing workshop, Li Xiang said to Dong Xiaoming, who was working: "Xiao Ming, stop for a while, replace these drill bushes, and test cut the second-generation machine." ”

When Dong Xiaoming heard this, he hurriedly took the drill sleeve in Li Xiang's hand and said, "No problem, I'll change it." ”

Changing the drill sleeve is a very simple thing, Dong Xiaoming can do it himself, took out the wrench from the toolbox, and quickly changed the drill sleeve.

Seeing that Dong Xiaoming had replaced the drill sleeve, Li Xiang took up his own pair of divine eyes and checked it himself, and found no abnormality, so he said: "Xiao Ming, what about the second-generation aircraft I asked you to prepare?" Push to try. ”

"I've been ready for a long time, just waiting for you to speak." Dong Xiaoming said, turned around and used the crane to lift a second-generation machine placed on the pallet onto the roller table.

Then Dong Xiaoming skillfully pressed a few buttons on the operation panel of the machine tool, and the second-generation machine body placed on the roller table slowly moved towards the machine tool.

Li Xiangshen's eyes opened, and through the protective plate of the machine tool, he directly saw the part of the oil channel hole processing, and couldn't help nodding slightly, everything was in his expectations.

Soon, the second-generation machine body used for trial cutting was processed, and it was slowly moved out from the outlet of the machine tool, Dong Xiaoming led the car again, dropped it, first blew the iron filings on it with an air gun, and then wiped the cutting fluid on it with cotton yarn.

Dong Xiaoming looked at the seven oil channel holes on the side of the fuselage and said, "It looks good, wait until I send it to the three coordinates to measure the specific value." ”

Li Xiang also looked up, different from Dong Xiaoming's naked eye, Li Xiang can accurately see the position of each oil channel hole, after the observation of the divine eye, Li Xiang was pleased to find that the position of these seven oil channel holes meet the requirements, that is to say, this adjustment is successful!

However, Li Xiang naturally couldn't tell Dong Xiaoming, he had already seen that the size fully met the requirements, even if he said it, Dong Xiaoming didn't believe it.

"Xiao Ming, the results of the three coordinates will come out in a while, if it is qualified, then the second-generation machining side oil channel hole will be done here for you." Li Xiang said.

Dong Xiaoming is very happy, if he can also process the second-generation machine here, the working hours will increase, and the salary will increase accordingly.

Watching Dong Xiaoming push the second-generation machine with a trolley to the three-coordinate inspection room, Li Xiang took out his mobile phone again and called Wang Xinxin, the squad leader of the first class of the body.

"Squad leader Wang, I have just adjusted the side oil duct hole processing machine tool, the processed body has been sent to the three coordinates, and the results will come out in a while, if it is qualified, you will arrange someone to pull back the second-generation machine that needs to process the side oil duct in the machining center, and process it on the machine tool, yes, that's it."

Hanging up the phone, Li Xiang raised his eyebrows, this has completed the optimization of a process, and there are still a few places that need to be rectified, but Li Xiang is already in the chest, but he has to take his time one by one.