……

After all, ordinary people don't have Wu Hao's ability to control with mental power and mental perception, only like Wu Hao who can do all the processes perfectly without any errors, can they have such confidence, and they will start running directly after all the installations are completed.

Soon, after Wu Hao input all the electricity into the fusion reaction device, the fusion reactor generated super high temperature and high pressure to make the nuclear materials inside begin to fuse.

And the whole inside of the reactor began to glow like a small sun.

The huge heat immediately began to act on the steam generator to produce a strong air flow, which was transported to the inside of the steam turbine through a special pipeline, and the continuous high-speed rotation of the steam turbine drove the generator set to start generating huge electrical energy, so as to continuously circulate.

After passing through the transformer equipment, part of this electrical energy is input into a large battery made by Wu Hao in advance, and the other part is directly connected to all the electrical equipment of the entire base.

For a while, all the spaces in the entire base became extremely bright, because it had only been more than half a month since Wu Hao started to build, and the entire base had not had much light.

It has always been a few small LEDs, which are responsible for all the lighting work of the entire base, and there is naturally no comparison with the current one.

"Hmmm! Yes, everything was as I expected, and there was not much difference in life. Wu Hao saw that the entire fusion reactor and the corresponding power generation device were running well, and he was naturally very satisfied with this.

After all, this is the result of a month of hard work, and he is the only one in this world who can complete it in such a short time.

And now the entire fusion reactor is not running at full capacity, because, at the current rate of power consumption at the base, it is not necessary to run all of them at all.

During this time, Wu Hao almost didn't have much contact with the outside world except for calling his family every few days to inquire, and as for his documentary, it was directly transmitted to several media organizations authorized by him very early, and now he doesn't need to release it every week.

Now that the record sheet he shot is almost halfway through, it means that there are still about two months to go, and Wu Hao has to start filming.

However, the shooting work is also very simple for Wu Hao, and he can use it as a rest time in his leisure time.

Of course, all this has to be done by the entire base to start operating, after all, Wu Hao must hurry up and develop a method for his father to completely eliminate cancer cells.

"There are almost ten days to go before the New Year, and it is time to go back, but I still have to prepare a gift before I go back." When Wu Hao thought of this, he immediately noticed in his heart that for his family, health is naturally the first priority.

Therefore, now that Wu Hao has solved the energy problem of the base, he can not only start to design and manufacture the instruments required by the biological gene laboratory, but also make some other gadgets.

After all, there is a lot of equipment needed in a biological gene research laboratory, and the space inside the base is not enough now. Wu Hao not only had to open up a new space again, but also needed to spend a long time designing and manufacturing these research instruments.

It will definitely not be completed in a few months, and now that the Chinese New Year is approaching, there is no need to be in such a hurry to build the research laboratory.

So he plans to use the remaining ten days to first make out the corresponding 3D printing equipment, and then make a special gift for his family.

After having sufficient power supply, the 3D printing equipment that Wu Hao wants to manufacture now is naturally not the semi-finished product before, what he has to do this time is to use the previous semi-finished 3D printing equipment, with his own mental power, to manufacture several corresponding 3D printing equipment on this basis.

For example, the 3D metal printing equipment that can run by itself, such a device must have a volume length of at least 6 meters and a height of 3 meters, and a completely sealed opening and closing hatch, this 3D printing equipment must be able to print various large metal parts by itself, and must also be equipped with integrated automatic finishing equipment, such as merger drilling, milling, grinding and other finishing processing.

The 3D metal printing equipment with this function has already appeared in foreign countries.

Of course, in addition to this kind of 3D printing equipment specially used to process large metal parts, some smaller, more precise parts also need special 3D printing equipment.

It can be said that Wu Hao's plan is to use these 3D printing equipment with different functions to complete the design and production of all parts and electronic components.

Three days later, Wu Hao finally completed the manufacture of the first 3D printing equipment, which is specially used to print various composite materials.

For example, plastics, resin materials, carbon fiber materials, etc., this equipment covers an area of 2 meters, is a height of 2 meters, width of 3 meters, length of 5 meters, the maximum length of parts can be processed is 4 meters.

However, there is no complete enclosure to package yet, but as soon as the machine is up and running, it will be able to have a corresponding enclosure immediately.

This 3D printing equipment specially used to print composite materials, the shell material used, Wu Hao used his own modified new plastic materials to make it.

Soon, when Wu Hao finished adding the raw materials, he directly entered the corresponding drawings into the computer program of the 3D printing equipment.

Two hours later, all the shells of this 3D printing equipment were made, and then Wu Hao directly installed these shells through telekinesis!

"It's not bad, it's not quite the same as I expected, but it's barely enough in the beginning." In fact, Wu Hao can make better and faster 3D printing equipment.

But if you want to do this, you must remanufacture new printheads and many related precision components, after all, these things are purchased by Wu Hao, and their ability can only be achieved to this extent, if you want to be better, he can make it himself.

After the first 3D printing equipment was manufactured, Wu Hao did not continue to manufacture the equipment, but started another design plan.

This design plan is also the gift he wants to prepare for his family, this gift is nothing else, just a robot with simple intelligence.

To put it simply, Wu Hao is going to build a health robot 'Dabai' similar to that that appeared in an anime movie.

……