"Hehe, I can't study, the teacher doesn't like me, I didn't have a chance in the midterm exam, I just didn't go, it's good to be a worker."

He Qiang scratched his head embarrassedly, but his head was covered with a thick protective suit, and he couldn't reach it, so he could only smile awkwardly.

"You don't want to learn Chinese, what do you want to learn, learn Japanese from them?"

Li Jian's eyes swept over the Japanese engineers who were testing the production line in front, and He Qiang licked his lips,

"These little devils are really dedicated, this production line has been tested three or four times, by the way, Brother Jian, if I can learn this set, can I be a small worker?"

Li Jian nodded,

"If you do a good job, don't talk about small jobs, let you be the team leader, you have to serve the public, now everyone can't, if you learn the best, even if I don't let you do it, others will choose you."

He Qiang listened to Li Jian's words, seemed to have eaten a lot of stimulants, a smile appeared on his face, and he happily followed behind the Japanese engineers, watched how people moved, and took out a pen to record it in a notebook.

"The bearing angle is qualified at 165 degrees, the viscosity of the lubricating fluid is qualified, and the voltage is qualified......"

The Japanese project did not go to a place, will test the parameters, Li Jian slowly followed, every time they said a data, they compared it with the process description in their heads, sure enough, the little devil did not pit people in this regard, and when the production line came down, Li Jian walked opposite the engineer but he just came back, and people didn't know him at all.

"Now for today's training, last time we talked about the preparation of materials. The next step is how to photoetch and draw on the glass panel, first of all, adjust the lithography machine to this angle and follow the pre-selected graphics. Set the numbers here......"

An engineer began to speak in Japanese, and where did a Chinese person they brought to translate, Li Jian listened and thought at the same time, this translator explained well, it seems that he has been engaged in the work on the production line, and some of the professional terms of the engineer have been appropriately reduced in difficulty, and these veterans who do not have a deep understanding of chemical industry and electronics can understand the language to tell.

"This translator is still a talent. When he finishes explaining, he will see if he can dig it up. ”

Li Jian made up his mind and began to listen to the lectures of the Japanese engineers again, and these workers were the first batch to eat. After eating and drinking, he seemed to be very energetic, and if there was anything he didn't understand, he immediately raised his hand to ask the translator. If the translator can answer it, he will answer it himself. If I couldn't answer or couldn't get it accurately, I asked the engineers in Japanese.

After listening to it, Li Jian has already understood the process described today, and compared it with the operating procedures, sure enough, the experience summarized by the predecessors is the only way to improve efficiency, and the experience summary of these little devils is quite perfect.

Seeing that the workers were all surrounding one of the engineers asking questions, Li Jian simply took a detour to the back and communicated with the person at the back of the engineer team in Japanese. Seeing that Li Jian could use Japanese, the other party was very surprised. After some introduction, Li Jian knew that this person's name was Ryuichi Yamamoto, and he was an engineer at MEC.

Ryuichi Yamamoto is also an expert in LCD manufacturing, and was invited to join the Japanese team's large LCD plan expert team, this time I came to see what ideas and advantages Qianghua has for the development of LCD, but he didn't expect Qianghua to start from scratch, he couldn't help but doubt the authenticity of the red plasma technology that Qianghua transferred to MEC.

But as soon as Li Jian communicated with him, he immediately subverted his views just now, Li Jian's question actually pointed to the core of the liquid crystal manufacturing industry, and he couldn't answer many questions, but as long as he thought about it a little, he understood that this must be the direction of the future development of liquid crystal, such as the relationship between the reaction speed of crystalline phase liquid phase and voltage, current and temperature, such as the viewing angle of hyper-nematic liquid crystal display.

Yamamoto Ryuichi's forehead doesn't know when a layer of sweat has appeared, sticky in the protective suit as if an egg has been lost, his contempt for Qianghua just now has been exhausted, and even the idea of staying in Qianghua for a period of time and communicating with the young worker in front of him for a few more days, if you go back and figure out a few questions asked by this worker, I'm afraid that the first person in Japan in terms of liquid crystal is none other than him Yamamoto Ryuichi and Two.

Li Jian from Yamamoto Ryuichi has already understood the technology related to the entire production line, thoroughly understood, combined with the operating procedures manual, he believes that he should be able to control the production line, so he asked Yamamoto Ryuichi and Tsui to conduct a live demonstration, the Japanese engineer plus the debugging workers of the production line There are about eight or nine people, which is enough for the simplest production.

Ryuichi Yamamoto nodded in agreement, and after communicating with a few colleagues, he acted separately and prepared the preliminary preparations, because it was debugging, so it was tentatively decided to operate only one panel, in fact, to let these workers see how to apply it.

A panel is not an inch or two inch screen in the ordinary sense, but a 20-inch long and 20-inch large LCD panel that is poured as a whole, and will be cut after the finished product and cut into the required one-inch and two-inch screen.

An ITO film is placed on the platform, and the circuit is depicted on the ITO film according to the pre-designed circuit diagram, after which the IPO film is deposited on a very thin piece of glass, and the entire IPO glass piece is placed in ionized water and cleaned.

After cleaning, the IPO glass is taken out and laid flat on the operating table, the photoresist is evenly spread on the surface of the whole glass, and after baking, the solvent of the photoresist is evaporated, and the photoresist and the glass are more closely combined.

The IPO glass is placed in a special container, a baffle is placed on top of the glass, and ultraviolet light is irradiated for selective exposure.

The production of the entire LCD panel is lengthy and complex, and this is only the first generation of LCD production line, single gray green screen panel, if you want to produce STN super nematic LCD panel used in the future, the process is more complex, more steps, and higher requirements.

Qianghua's workers watched carefully as these Japanese engineers operated, although most of the work was done by machines, but these engineers were still cautious and acted in strict accordance with the operation manual.

"Will you do?"

An engineer named Anti-Long Xiang asked in Japanese, and the interpreter immediately translated.

"It's almost done, but the operation shouldn't be good."

"I'll have to watch it twice."

"How dare you move this casually if you don't practice a few times, if it is broken, it will not be smashed."

Domestic workers have always been very modest, not completely sure, they will not compete for the limelight, but after the translation came back, anti-Long Xiangjian contemptuously said a sentence in Japanese, and was stopped by Yamamoto Ryuichi and II halfway through.

"Don't talk nonsense." (To be continued......)