The weather in April is warm and cold, and the north wind occasionally blows, blowing chills on people's faces, but the occasional grass that sprouts on the ground shows the majestic vitality of the earth.

This season is also a good time to break ground, the industrial park in Rota Town, Zhenshen City is full of people, Li Jian looked at the hot scene in front of him, and his eyes showed a look of satisfaction.

This is the place he originally demarcated for the production of lithium batteries, paper mills and chemical plants, the land acquisition work has long been over, the new workshop has already started, and even the warehouse not far away has been full of bamboo transported from other places, and the paper mill is constantly swallowing bamboo chips, spitting out black water and black water, as well as white white paper.

And now what is being started is not his workshops, but outside the original wall, from the original Xunjie factory to the newly opened Xunchi factory in the middle of the vast land, at this moment has been enclosed with a wall, the Xunjie factory Xunchi factory is connected as a whole.

This is the site where he is going to start the construction of the wafer factory, and now the construction is to carry out civil engineering construction, first to build the factory building.

After verbal negotiations with Tan Yongsheng's old fox, in the end, Li Jian still couldn't bear to completely exclude the state-owned assets, but let Tan Yongsheng use land, workers and equipment, plus 40 percent of the capital to buy shares, but only accounted for 15 percent of the overall shares, which was no different from the conditions put forward by Li Jian.

Thinking of Tan Yongsheng's expression at that time, Li Jian was a little scared, and the old man almost fainted. But in order to be able to obtain the products that are open to supply in China, as well as the technology transfer that Li Jian promised, he could only pinch his nose and admit it.

Li Jian asked him afterwards. Is the Ministry of Electronics Industry not ready to invest in the construction of a wafer factory on its own, Comrade Lao Tan nodded incredulously, indicating his bottom line and position, he actually wanted to urge Li Jian to start the construction of a wafer factory.

As for how to obtain the equipment and authorization of the wafer factory from abroad, Tan Yongsheng pushed it to Li Jian.

Precision cutting instruments, Li Jian is not worried, the equipment principles and materials of CNC machine tools are in his mind. But what is missing is only the equipment used to produce these equipment, that is, the need for a high-precision CNC machine.

and monocrystalline furnaces and other equipment for the production of monocrystalline silicon. Li Jian also has ready-made drawings in his mind, and if there are suitable processing personnel, Li Jian feels that it is not too troublesome for him to manufacture. ‘

But if he wants to build a factory, these things in his head. It has to be transformed into one device after another. How to make these devices is a big problem.

There is no domestic enterprise that has the experience of producing these equipment, and mobilizes those qualified enterprises to produce together, which is not a problem, and all that is needed is time and materials.

However, what Li Jian lacks now is time, and the reason why he agrees to state-owned assets occupy 15 percent of the shares. Eat 15% of the profits for nothing from beginning to end, isn't it because if you save this money? Is it going to take time?

And the sooner the large-scale integrated circuit, which is full of Zhaoyang atmosphere, the more you can carve out a piece of this cake for yourself to taste.

If these equipment are produced by domestic enterprises, it will take half a year or even a year, and it may take two years at most to complete the production, after all, the optical single crystal furnace and ancillary equipment are not a small number, not to mention other equipment.

Li Jian's original plan was to buy all from abroad, and now, he still thinks like this.

For this reason, Tan Yongsheng also deliberately talked to him for a long time, but what Li Jian threw to Tan Yongsheng was a look that I knew at the beginning, Li Jian said to Tan Yongsheng at that time, this money, you invest it, I want to sell the factory and take it away, you can't speak out against it, now that the factory has just started to be built, Tan Yongsheng came to inquire, isn't it a confirmation of Li Jianjian's thoughts at the beginning.

Old man Tan held back an internal injury and left, there was no way, Li Jian said at the time that he was afraid of this, and he swore that he would not, but three days did not pass, he ran over and asked, isn't this still interfering with other people's management, no wonder Li Jian does not agree with state-owned holdings, this is really a common problem of state-owned holdings.

If it is that kind of investment consortium, there will be no such problems, but you just take a fancy to the people and the project, invest the money in it, and the project manager can do anything, but as long as you hand in a satisfactory answer in the end, you can do it.

Isn't this how the SoftBank Group of the island country invested in our famous Alimama Group, which has not only created the first hegemon of the domestic Internet, but also brought countless wealth to the SoftBank Group of the island country.

But Li Jian couldn't explain these to Tan Yongsheng, so he simply didn't explain, just one sentence, your state-owned assets only have 15% of the right to dividends, what I want to do, you can't care.

But it is not so easy to introduce these products from abroad, Li Jianshe hit the idea to the island country's photographing experts Nengjia and Conish, Nengjia and Connie's lithography machines in the lithography machine industry in addition to the Dutch ASML is a leader, of course, ASML occupies 80% of the market outside the leader, the remaining 20% of the market, basically these two are divided.

Intel, the world's largest producer of large-scale integrated circuits, once cooperated with Connie to develop a higher-end lithography machine to improve the production process of wafers, that is, to increase the number of circuits that can be enriched on a wafer.

The greater the number of circuits enriched on the same size wafer, the more advanced the process required, such as 32nm and 28nm are two levels, and the role of lithography machine in it is incomparable.

At this time, the foundry king of Baodao Province has not yet started, all large-scale integrated circuit manufacturers, such as Internet, such as AMD, are their own design circuits, their own production, this time to catch up with their pace, should be the best opportunity.

If we wait until 87 years and Bao Semiconductor is established, they only need to design circuits, and Bao Semiconductor gives them OEM, so that they can devote more energy to the design of large-scale integrated circuits, and it will be even more difficult to catch up with them.

Buying a lithography machine separately, Nengjia and Connie should have no problem, but the lithography machine is a must for large-scale integrated circuits, and the Batumi embargo is a high-end technology that can be used for military or civilian use, and the products produced by the lithography machine are not only civilian, but also play an immeasurable role in high-end military products, precision-guided missiles, submarines, aerospace, etc

None of them require LSIs.

If you want to buy a lithography machine from Connie and Nengjia, you must not buy it directly, so you can only think of other ways. In front of these engineering teams are in full swing of work, these work is based on the ability to purchase equipment, but the equipment, now there is no eyebrow, if the equipment can not be purchased, these jobs, the work of these personnel and workers, all the hard work will be in vain.

As for buying directly from Ames, there is no such possibility, and from the memory of the past, there is no precedent for such success.

If you want to succeed, you can only start from the side of Japanese enterprises, and Batumi is facing the blockade of the entire socialist country, but Soviet Russia successfully broke this blockade, resulting in the so-called Zhidong Incident.

If Li Jian wants to start now, he can only start from Japanese companies, but if he buys directly, they will definitely not sell it, unless it shows that the Chinese side has mastered this technology.

"Looks like I'm going to have to go to Japan!" Li Jian sighed, since he went, he prepared to buy all the things from the Japanese side at one time, saving himself from having to find another way, even if it was loaded, he only needed to install it once.

The technology of the lithography machine, after 30 years in China, the Shenhai Electronic Equipment Manufacturing Factory has completely mastered it, and from the original only mastering the low-end technology to the real mastering of the high-end technology, therefore, this part of the lithography machine technology, Li Jian has a complete copy, he can write down all the technology and technology.

There is technology, of course, it is more advantageous to produce by yourself, even if it is handed over to other domestic enterprises for production, it is better than buying directly from abroad, but this is the same as a single crystal furnace, mastering the technology and process, but there is no such production conditions, no suitable factory, no qualified workers.

To make one alone, it can be said that to overcome the difficulties, everyone worked hard, worked hard, and used a certain amount of time to overcome difficulties and build it. However, if you need eight or ten units at the same time, I am afraid that the time will be extended several times, but large-scale industrial production is not a matter of dozens or hundreds of units, and in terms of time, it is simply too late.

In particular, although the technology of the lithography machine is mastered, it is not so easy to produce it, and the things needed in it cannot be met in China now, which is why Li Jian must find a way to buy it from Japan.

Following the practice of Batumi at that time, they wanted to create an illusion for China that it was better to buy than to buy, and they strictly controlled the spread of this technology to China if China needed any advanced technology, but once the country began to develop this technology on its own and achieved certain results, they would open up the products of this technology, and even did not hesitate to lower the price, so that the price of the finished product was lower than the cost price.

In this way, it will cause the technology that has not yet completely broken through, and it has become a useless technology, and the products produced by themselves are not as cheap as those bought, and all the technological investment is thrown away in vain, not to mention how many products are produced is equal to how much money is thrown away in vain, and how many people are willing to adhere to such technology, which is tantamount to stifling the foundation of domestic technological reserves.

If they can take advantage of this and let them see that the country has mastered the low-end lithography machine technology, they will definitely not mind selling the mid-range lithography machine to China. (To be continued......)