Tianfeng Technology Company.

Li Tianfeng basically knew a series of situations of the J-30 fighter's test flight outside, because several technical teams were dispatched to track the test flight of the J-30 fighter and provide technical services.

Just now, Li Tianfeng received a report that the prototype of No. 002 has been stationed at Yongxing Island Airport in Xisha and will conduct a test flight in the South China Sea to verify the adaptation of the J-30 fighter to subtropical and tropical marine climates.

The No. 001 aircraft is at a certain air base in the southeast and continues to carry out various kinds of tests, and as for the No. 003 prototype, which is a carrier-based type, it is undergoing various flight tests on the "Liaoning" aircraft carrier.

With a better understanding of the test flight situation and confidence in the J-30 fighter, Li Tianfeng estimated that a series of planned field test flights and verification would definitely be completed before New Year's Day.

Considering the future of small batch production, the production and manufacturing of various parts of the J-30 fighter has been started, and the first batch of parts has been put into production.

After the manufacturing of these parts, they will be used for the small batch assembly of the J-30 fighter in the near future, that is to say, once the J-30 fighter successfully completes various test flights, it will immediately enter small batch production, and there will be parts for final assembly immediately.

The test flight of the J-30 fighter went smoothly, and Li Tianfeng was basically at the Chengnan base every day, and sometimes, even worked at the Chengnan base for several days.

The production and manufacturing of J-30 fighter parts has started, and the trial production and verification of various parts of the J-18 fighter have also entered the final stage.

The trial production and verification of parts of the J-18 fighter are basically done in one or two batches, and a small number of parts with slightly more difficult processes and slightly higher technical content will go through three or four batches.

At present, the parts that are still being tested and validated are still being processed. It's basically the third batch, or the fourth batch.

The trial production and processing of various parts of the J-18 fighter have reached the final stage, and the trial production of the avionics system and radar has basically been preliminarily completed.

The avionics system of Tianfeng Technology Company has formed a design platform. It has also gathered a large number of related engineering and technical personnel, forming a strong design and development team.

The avionics system has been tested and tested, and the performance has basically met the design requirements, and some minor problems need to be perfected and improved.

The radar R&D and manufacturing have also been basically completed, and the airborne radar system of the J-18 fighter is designed and developed by Tianfeng Technology Company.

The airborne radar system of the J-30 fighter is extremely high-tech, and Li Tianfeng personally guided it, almost with the strength of the whole country. Bringing together the top radar experts in China and several related units, we will work together to develop them.

Considering future developments, Tianfeng Technology must enter the field of radar R&D and manufacturing, especially airborne radar systems. The radar system of the J-18 fighter is one level lower than the radar system of the J-30 fighter, and the difficulty is not so great.

This airborne radar was developed by Tianfeng Technology Company. Bring together a professional R&D team, plus Li Tianfeng's technical guidance. The progress is good, the trial production of the airborne radar system has been completed, and it has also entered the stage of performance testing.

This is an airborne radar designed and developed by Tianfeng Technology Company, although it is not as good as the airborne radar of the J-30 fighter, but it is also very good.

Although it is not as good as the airborne radar of the fourth-generation fighter, but among the third-generation fighters. Such a radar system is undoubtedly top-notch.

Li Tianfeng took a look at the manufacturing workshops in the south of the city, looked at the processing and trial production of each part, and returned to his office, where two test reports were placed on the desk.

These two trial reports. One is the avionics system performance test report of the J-18 fighter, and the other is the airborne radar system test report of the J-18 fighter.

Whether it is an avionics system or an airborne radar system, it is undoubtedly very important for a fighter, and Li Tianfengzai carefully read these two test reports.

The design requirements are basically met, and some small problems still need to be improved and improved. Li Tianfeng is undoubtedly satisfied with such a result.

After reading the report, Li Dawu knocked on the door and entered Li Tianfeng's office, and when he saw Li Dawu, Li Tianfeng said, "Dawu, what's the matter?" ”

Li Dawu said: "Boss, the production and feeding of the first batch of parts of the J-30 fighter has been completed and has begun to be manufactured, and each workshop is producing according to the production plan. ”

Li Tianfeng nodded and said: "Well, I have seen it when I was in the workshops just now, the processing of these parts has begun, and the processing situation is not bad." ”

Li Dawu said: "Boss, the processing is relatively smooth, the processing quality is also better, whether we will invest in the production and manufacturing of a batch of parts." ”

This suggestion is good, Li Tianfeng also has such a plan, the first batch of orders for the Jian-30 fighter military will reach 100 planes, Li Tianfeng estimates that the number of J-30 fighters in the army is definitely more than 100, it is estimated that there are two or three hundred, or even more.

The J-30 fighter is not expensive, the price is only 80 million US dollars, and it is the world's top fighter, and the military will definitely place a large order.

The United States has produced less than 200 F-22 fighters, mainly because the F22 is expensive to build, and there is no rival, so the United States believes that the number of nearly 200 fighters is sufficient.

With the advent of the J-30 fighter, the United States has restarted the F22 fighter production line, and the United States will also equip a large number of F22 fighters.

The J-30 fighter is cheaper than the F22 fighter and much more cost-effective, and it is not surprising that the military ordered three or five hundred.

The military needs J-30 fighters, Li Tianfeng is naturally ready to produce and manufacture at full capacity, and it is best to quickly assemble troops in large quantities......

Li Dawu's suggestion is exactly what Li Tianfeng wants, Li Tianfeng said: "Dawu, the suggestion is good, in another week, if the first batch of parts is manufactured smoothly and the processing quality is better, the second batch of parts will be put into production." ”

Thinking about it, Li Tianfeng added: "Start production at full capacity, and put into the production and manufacturing of a batch of parts for the J-30 fighter every ten days and half a month. ”

Hearing this, Li Dawu was overjoyed, and he didn't think about it, Li Tianfeng really adopted his own suggestion, and Li Dawu is no longer engaged in technical work, but is responsible for the production of the entire Chengnan base.

As a deputy general manager in charge of manufacturing, the measure of Li Dawu's work is to see how many things are produced, if the quality and quantity can be guaranteed, and a large number of J-30 fighters can be produced within a year, that is the achievement.

Li Tianfeng knew Li Dawu's thoughts and moods, Li Tianfeng thought for a while and said, "Dawu, have you completed the capacity assessment of the Chengnan base?" ”

Li Dawu said: "Boss, it has been completed, before the second phase of the project is completed and put into use, our production capacity is a monthly output of two 'Black Ghost' UAVs, the output value of the OEM parts business is about three billion US dollars, and the monthly output of J-30 fighters is about ten, of course, if the J-18 fighter enters mass production, the monthly output of the J-30 fighter will be reduced." ”

Monthly output of 10 J-30 fighters!

This is a very proud achievement, hundreds of them in a year, although if the J-18 fighter enters mass production, it will have a certain impact on the production of the J-30 fighter, but this impact will not be long.

The second phase of the project is under construction, and when the J-18 fighter really enters mass production, the second phase of the project will be basically completed and will be put into use.

At that time, the OEM processing business will be moved into the second phase of the project, even if the J-18 fighter enters mass production, but because the second phase of the project is put into use, the overall production capacity will be expanded, and the monthly output of the J-30 fighter will only increase, and the monthly output of the J-18 fighter is not small.

Happy in his heart, Li Tianfeng waved his hand and said: "Dawu, the J-30 fighter will soon be produced in small batches, at most half a year, and the J-30 fighter will enter mass production." ”

Considering that the process technology needs to gradually mature and problems, coupled with the possibility of some design refinement and improvement, there is generally a small batch production and manufacturing period, this time, depending on the specific situation, for the general aviation industry enterprises, it may be one or two years, or it may be two or three years.

Li Tianfeng knows that the production and manufacturing process of each part of the J-30 fighter is basically mature, the design is basically finalized, and the three- to five-month small-batch production and manufacturing period is sufficient.

Within half a year, it entered mass production and manufacturing, and by that time it had produced more than 10 J-30 fighters per month, Li Dawu was inexplicably happy when he heard this.

Mass production and manufacturing of J-30 fighters, which will be their own dazzling achievements, Li Dawu said: "Boss, you can rest assured, we will enter the mass production of J-30 fighters within half a year." ”

………

Xisha Island, Woody Island.

Yesterday, the J-30 fighter was stationed here, and early this morning, the eastern sea level is showing a round of rising sun, and the J-30 fighter is already making preparations before takeoff.

Several technicians from Tianfeng Technology Company and several ground staff at the airport cooperated together to inspect the J-30 fighter before take-off.

Everything is fine with the fighter and it can take off!

Test pilot Tang Liang was ready to go, and after checking his equipment a little, Tang Liang boarded the fighter vigorously and skillfully in the envious eyes of many people.

The cockpit canopy of the fighter plane slowly closed, and after receiving the order to take off, Tang Liang made an "OK" gesture to the crowd in the distance, and then started the engine.

In the distance, there are not only several persons in charge of the airport, but also ground staff, technicians from Tianfeng Technology Company, and even a few pilots, and the focus of everyone's attention is this J-30 fighter.

The engine started, and it did not taxi, but in the amazed eyes of everyone, the J-30 in the runway slowly rose, and the J-30 fighter has the function of vertical take-off and landing.

"Oh my God, look! Straight off the runway, so fast! ”

Many people know that the J-30 fighter has a vertical take-off and landing function, but it is another thing to really see it up close with your own eyes, and the shock in your heart is basically difficult to describe in words.

………

Today's three watches, the second one is sent! (To be continued......)