Today, the Wei Gong mentioned by Long Yingshi on the last phone call finally came, and Li Tianfeng met him a little, this is a middle-aged man, wearing glasses, and his body is relatively fat.

The specific reception work, Liu Wei is in charge, the counterpart technical work Zeng Qinghai is in charge, if Long Yingshi comes over in person, Li Tianfeng may accompany him, this health worker, although he is a senior engineer, but Li Tianfeng personally came forward to receive it, which is already very face-saving.

Today, Li Tianfeng's mind is all on the batch of parts of the Harry Burton Company, a few days ago, in the grinding process, it was a false alarm, and the back was quite smooth, just now Zhang Can has called, this batch of parts a total of 200 pieces have all entered the final inspection process.

As soon as the inspection process is completed, if all the inspections are qualified, the packaging box can be played, and the processing of this batch of parts is completed.

Today, the parts enter the final inspection process, and Duan Xinjun, the general manager of the International Industry and Trade Branch of Factory E, will come to see it in person, and Li Tianfeng is talking to Duan Xinjun on the phone.

"Mr. Duan, you really don't need us to send a car to pick you up."

"Mr. Li, it's too polite, our two companies are so close to each other, we will drive over by ourselves and say it right away."

"That's fine, then it's decided."

Hung up the phone, Li Tianfeng picked up the phone and explained to Liu Wei, Liu Wei personally went to the factory gate to greet him, while Li Tianfeng went out of the office, got off the office building, and prepared to greet him at the door of the No. 1 workshop.

Li Tianfeng walked to the gate of the No. 1 workshop, accompanied by Tan Ke, the director of the No. 1 workshop, and Zhang Can, the technical director, and so on, without waiting for a few minutes, Li Tianfeng saw a group of people in the distance walking towards the No. 1 workshop, and the two people walking in the middle and the front were Duan Xinjun and Liu Wei, followed by several people. These people were obviously brought over by Duan Xinjun.

The first time I came to Tianfeng Technology, although I had heard of Tianfeng Technology for a long time, and I had heard Yang Xianfeng mention it many times, and Yang Xianfeng's evaluation was still very high, I didn't think that after coming here, Tianfeng Technology was very big. It's very modern, and before he walked into the processing workshop, Duan Xinjun was surprised in his heart.

Tianfeng Technology, compared to its own international industry and trade branch, is a lot stronger, there is almost no comparison between the two, Duan Xinjun thought.

While walking, I listened to Liu Wei's introduction and looked around from time to time. Walking to the door of the No. 1 processing workshop and seeing Li Tianfeng, Duan Xinjun consciously quickened his pace.

"Oh, Mr. Li, it's too polite, you greet me personally, I can't afford it." Duan Xinjun put his posture very right.

Li Tianfeng smiled, "Mr. Duan." Welcome over and away. Let's go in and take a look. ”

Seeing that Tianfeng Technology was so magnificent, so large-scale, and so modern, Duan Xinjun had long wanted to enter the processing workshop to take a look, so he said: "Okay, good." Mr. Li, let's go in and take a look. ”

Walking into the No. 1 processing workshop, I saw such a huge, so neat, and such a good processing plant. Duan Xinjun was surprised.

The few people who followed Duan Xinjun over, seeing such a factory, couldn't help but quietly glance at each other, their expressions were full of surprise and shock!

"Wow, high-precision CNC lathes imported from Germany!"

"Wow, Swiss imported precision machining center!"

"Wow, imported five-axis linkage machining center!"

"Wow......"

“……”

Seeing so many high-end and high-grade processing equipment in the No. 1 workshop, not only Duan Xinjun, but everyone was amazed, as if Grandma Liu had entered the Grand View Garden.

The people of the international industry and trade branch have always regarded themselves very highly, and feel that their company's machinery and equipment should be considered very good in the whole Songzhou, and they can be regarded as the number one, but when they look at Tianfeng Technology, they make a judgment, this is the gap!

What a gap!

Look at Tianfeng Technology, this piece of equipment, look at the atmosphere, look at it is comfortable, too hanging, too good, those imported equipment, just pull out a piece is worth millions, including tens of millions of equipment, and tens of millions of equipment more than one, a little glance, everyone saw several devices worth tens of millions.

Duan Xinjun had to obey and sighed: "Mr. Li, if you don't come to take a look in person, I really can't imagine that your processing plant is so good, and these machine tools and equipment alone are worth at least hundreds of millions."

Li Tianfeng happily introduced: "The total value of the machine tools and equipment in the No. 1 workshop is more than 500 million. ”

More than 500 million!

Duan Xinjun was surprised again, thinking that the total value of the machine tool equipment of his international industry and trade branch was only more than 100 million, which was only one-fifth of the total value of the machine tool equipment in a processing workshop.

No wonder, no wonder Mr. Yang recommended Tianfeng Technology at the beginning, and gave this batch of parts of Halle Burton Company to Tianfeng Technology for processing, no wonder!

Thinking about this batch of parts, Duan Xinjun's heart was hot, full of hope, and he thought in his heart, in such a processing plant, the processing quality of this batch of parts should not be bad.

Thinking so in his heart, Duan Xinjun unconsciously quickened his pace and walked towards the inspection area not far away, because Duan Xinjun had already seen the batch of parts neatly placed in the inspection area, and several inspectors were inspecting there.

Seeing Duan Xinjun's expression, Li Tianfeng's heart was happy, and he also sped up a few points, and the group of people all walked to the inspection area and began to look at the batch of parts being inspected with great interest.

Duan Xinjun was obviously very interested, and personally looked at a part that was being inspected, and after taking a closer look, Duan Xinjun sighed for a while, this is the gap!

Duan Xinjun said to the few people next to him, "Comrades, do you see the gap?" ”

These people obviously rarely see parts with such good processing quality, and they nodded their heads and sighed for a while, this is really a gap, and the gap is very large.

Thinking about the batch of parts that they had processed before and were directly rejected by the Harry Burton Company, these people sighed, their faces turned slightly red, and they were ashamed of the batch of parts they had processed before.

Duan Xinjun said: "Mr. Li, I didn't expect that the processing quality of parts is so good, thank you so much this time, thank you so much!" ”

Holding Li Tianfeng's hand, Duan Xinjun was full of gratitude, such high-quality parts, it can finally be delivered, Harry Burton Company began to urge delivery yesterday, Duan Xinjun was under a lot of pressure, and now, seeing that the quality of this batch of parts is so good, Duan Xinjun has no pressure at all, and he feels very confident.

Li Tianfeng is also more happy, two hundred parts, the processing quality is very good, after the delivery of this batch of parts, a processing fee of more than two million US dollars will soon enter the account of Tianfeng Technology, this business, big profit!

In the follow-up, there must be a second batch of parts, a third batch of parts, if nothing else, the follow-up parts will automatically come to the door, Li Tianfeng thought.

The surface processing quality of the parts is perfect and very beautiful, which not only shows that Tianfeng Technology has excellent processing strength, but also reflects that Tianfeng Technology's technical management is first-class, and the process control is very strict.

Several inspectors inspected at the same time, and the inspection speed was relatively fast, and the dimensions were measured one by one, none of them were out of tolerance, all of them were qualified, and there was a part of the size difference.

Looking at these measured dimensions, all of them were qualified, Duan Xinjun also became interested, personally picked up a micrometer, and personally measured the same size of several parts in a row.

Qualified!

Qualified!

Medium!

Qualified!

……

All the sizes are qualified, and some are still poor, suddenly, Duan Xinjun was in a good mood, and said happily: "Mr. Li, I have a treat today, and we will have two drinks at noon." ”

Seeing that Duan Xinjun was so happy, Li Tianfeng also readily agreed, and said with a smile: "That's okay, Mr. Duan broke the bill, drink two glasses at noon today to celebrate." ”

A full 200 parts, after passing the inspection of Tianfeng Technology Company, will be affixed with the certificate provided by the International Industry and Trade Branch, packed and boxed in Tianfeng Technology Company, and sent to Harry Burton Company.

The packaging of the parts is very particular, the parts are oiled, carefully wrapped with yellow kraft paper, wrapped with a layer of bubble wrap, and then boxed, and a thick foam board is placed in the box, so that the parts are well protected, and there will be no bumps even during the transportation process.

……

Harry Burton's batch of parts was sent from Tianfeng Technology Company, and the processing of this batch of parts was perfect, but the processing of another part, the processing of the large integral blade disc from Factory B, encountered a little trouble.

Workshop No. 1, a large five-axis simultaneous machining center, is ready for rough machining of blades.

The integral blade disc naturally has a circle of blades, which is a large integral blade disk, each blade is relatively large, relatively wide, relatively long, the processing of the blade is divided into rough machining and finishing, and the rough milling of the blade will be carried out.

The integral blade disc with a diameter of nearly one meter is extremely difficult to process, even if it is rough milling, not only the processing cycle is very long, but also the technical difficulty is not small.

Zeng Qinghai is accompanying the Wei Gong from Factory B, next to this large five-axis linkage machining center, planning to take a look at the processing of parts in person.

This Wei Gong is obviously also an expert, otherwise, Long Yingshi would not have sent him over, Wei Gong personally looked at it, frowned and said: "Minister Zeng, I don't think this milling cutter is appropriate, it needs to be replaced." ”

This is a slotting milling cutter, rough milling blades, first of all, you must use such a milling cutter to cut a groove on the part one by one, and then continue to mill along these grooves until the general shape of the blade is milled, and finally meet the requirements of the process.

When the slotting milling cutter works, the speed is very high, and the efficiency is also very high, this milling cutter is based on such a design, and it is still a corrugated milling cutter, cemented carbide material, and there is a black coating on the surface.

Zeng Qinghai looked at this milling cutter and said seriously: "Wei Gong, I don't think there is a problem with this milling cutter." ”

………

Today's three watches, the second one will be sent. (To be continued......) R527