F16 fighters, J-10 fighters, etc. are third-generation fighters, and J-18 fighters are also third-generation fighters, top-level third-generation fighters, and kings of third-generation fighters.

Fourth-generation fighters, in everyone's opinion, this is amazing, looking at the world, there are only a few fourth-generation fighters, such as the domestic J-20 fighter, the United States F22 and F35 and so on.

Such a great fighter, Tianfeng Technology Company is actually also developing, there was no wind before, He Jun was excited, before seeing the "Black Ghost" UAV, He Jun was proud and excited, and now, he actually saw the fourth-generation fighter developed by Tianfeng Technology Company.

A government official next to him said: "Mr. Li, is this the J-30 fighter that was hotly discussed on the Internet some time ago, a fourth-generation fighter that is more advanced and excellent than the American F22 fighter!" ”

This is a relatively young official, who may often go online, and usually pays more attention to things on the Internet, unlike He Jun, Chen Anjie and others, who usually only read newspapers and television, and has less Internet access, so they are not familiar with the J-30 fighter.

He Jun said: "Mr. Li, J-30 fighter!" It's the fighter in front of you! ”

Li Tianfeng said: "Yes, the one in front of me is the static testing machine of the J-30 fighter, which is mainly used for static testing to test the structural strength of the aircraft and the rationality of the structural design. “

He Jun said: "Mr. Li, can you give us a little introduction to the J-30 fighter." ”

Li Tianfeng said: "The J-30 fighter, strictly confidential, I can only introduce it slightly, this is the world's most advanced fighter, there is no one, the overall performance and technical content are above the American F22 fighter." It not only has excellent stealth performance, vertical take-off and landing function, and excellent maneuverability......"

Li Tianfeng did not say the specific performance parameters of the J-30 fighter, just a general introduction, but even if it is only a general introduction, it is enough to make everyone inexplicably excited. Inexplicably exciting!

He Jun said: "Mr. Li, the world's most advanced fighter!" I can't believe it! ”

Chen Anjie said: "Yes! The world's most advanced fighter plane, made in Songzhou! If you don't see it with your own eyes, you can't believe it! ”

A secretary, a mayor, both of them said they couldn't believe it, and the rest of the entourage, everyone, looked at the plane in front of them in amazement.

In the No. 2 final assembly workshop. Everyone looked at this J-30 fighter for a long time, and then went to one of the processing workshops to take a look.

In this processing workshop, seeing the modern workshop, strict management, and high-precision and cutting-edge manufacturing equipment, everyone said that this time was an eye-opener.

After taking a look at the Seongnam base. Approaching noon, Li Tianfeng politely entertained everyone. At the luncheon, He Jun and Chen Anjie had a few drinks with Li Tianfeng, and basically the two of them took the initiative to toast.

After lunch, He Jun, Chen Anjie and others got in the car and left, watching everyone go away. Li Tianfeng's mind came to mind the low profile and politeness of He Jun, Chen Anjie and others, and Li Tianfeng thought in his heart, is this the legendary "worship dock".

Thinking of this, Li Tianfeng himself couldn't help but smile, the local government has such a posture. The development of Tianfeng Technology Company will definitely be much smoother, and Tianfeng Technology Company and the local government of Songzhou City will always be an intimate honeymoon period.

As long as it is a wise local leader, it will provide a relaxed development environment for the development of Tianfeng Technology Company and fully support it in terms of policy.

As far as Jiangnan Province is concerned, an average prefecture-level city, the annual GDP is generally about 100 billion, and a better one is only one or two hundred billion.

Tianfeng Technology Co., Ltd. sold more than 200 billion yuan last year, and is expected to exceed 300 billion yuan this year.

Who dares not to pay attention to such an enterprise, He Jun and Chen Anjie came to visit together.

After seeing He Jun, Chen Anjie and others leave, Li Tianfeng said to several high-level executives next to him: "Let's go, let's take a look at the test run of the turbofan 25B engine." ”

Today, the turbofan 25B engine is being tested for the first time in the test engineering center, Li Tianfeng wants to go to see the test run, while Sun Xiaoping and Qiu Wenan are in the test engineering center since the morning to personally check the test run.

With a wave of Li Tianfeng's hand, everyone got into the car one after another, and several cars left the Chengnan base and headed towards the test engineering center.........

………

A well-known materials research institute in the United States.

Speaking of this research institution, it is well-known in the world, bringing together several of the world's top materials scientists.

In a laboratory of the research institution, several material scientists are conducting research, a corner of the laboratory, there are several parts, one of the test benches, there is a part that has been cut, if there is someone from Tianfeng Technology Company here, you can see at a glance that this is the part of the "Hercules" material produced by Tianfeng Technology Company.

Tianfeng Technology Co., Ltd. manufactures a large number of parts of "Hercules" materials, which are widely used in turbofan 21 engines and "Black Ghost" drones, and also produces and manufactures parts of "Hercules" materials for companies such as Boeing, Airbus, and Bombardier.

It is not difficult to get a few pieces of "Hercules" materials produced and manufactured by Tianfeng Technology Company, which is not a difficult task for this famous materials research institution.

It seems that the research on "Hercules" materials has been carried out in this research institute for quite a short time. From a large number of test and analysis reports, it can be seen that the parts of the "Hercules" material that were cut and sampled.

Before a very advanced microscope, there were several top materials scientists, one of them, gray-haired, not in his seventies, but at least in his sixties.

If there are people in the materials science industry here, they will definitely exclaim, this gray-haired old man is a famous scientist in the world, a famous academician of the United States, Dr. Clark.

"Oh God!"

One of the materials scientists, with an exclamation and then a look of frustration, immediately asked, "Dr. George, what's wrong?" Failed again. ”

Dr. George said, "Dr. Clark, come and take a look, what the hell, we've failed again!" ”

Not only Clark, but also several other material experts, everyone came over together, looked at the material sample under the microscope, and couldn't help but feel a little frustrated.

I don't know if this is the first time I have failed, but I have tried my best to pass countless tests, but I have not succeeded.

Clark personally looked at the sample he had trial-made, and then took the material sample of Tianfeng Technology Company, sighed, and shook his head.

"Dr. Clark, what are we going to do?"

Dr. Clark is not only a nationally renowned materials expert in the United States, but also the leader of this project, undertaking the analysis and research of Hercules materials.

With the wide application and export of "Hercules" materials in Tianfeng Technology Company, this material is more and more widely known, and the research on this material is not only in the United States, but also in many countries, such as Western European countries, such as Russia, such as Japan and South Korea.

The United States has invested heavily in bringing together several top materials experts, and it can be said that it is the first country in the world to carry out this material analysis and research, but even so, there is still no substantial progress, and there is no clue at all.

After looking at the two material samples under the microscope, Clark sighed and said: "This material must involve a new principle, a new theory that we don't know, maybe we have to start from another aspect." ”

The rest of the material experts nodded, and one of them said, "yes, I totally agree with that, we might really have to start with the theoretical stuff next." ”

Clark thought for a moment and said, "Everyone come here, let's talk and study it." ”

Several materials specialists, gathered together and centered on Clark, began an analysis and discussion of the "Hercules" material, trying to find out how this material was formed.

So far, the team has successfully trial-produced the resin material of "Hercules", as well as the carbon fiber required for the beautiful prototype of the "Hercules" material.

However, the problem also comes, no matter how hard you try, the carbon fiber integrated into this resin cannot be like Tianfeng Technology Company, so that this carbon fiber is very evenly distributed in the resin, and it is very regularly intertwined with the upper and lower left and right, showing a beautiful cubic structure, just like the carbon atoms of diamond.

The problem has always been stuck here, and Clark and others are also vaguely aware that the "Hercules" material must involve a completely new theory, and it is impossible to successfully develop it without mastering this theory.

Of course, this involves a completely new material theory, and mastering this theory is equivalent to opening a whole new door.

Because of this, Li Tianfeng boldly and very confidently used a large number of this material, and a large number of Boeing, Airbus, Bombardier and other companies on behalf of the production of various parts of the "Hercules" material.

………

Japan, a materials research institute.

In a laboratory, a senior staff member is furious, several researchers have their heads down, and a sample of the newly developed material, examined under a microscope, reveals that the carbon fiber in the material can only be described as a complete mess.

The senior officer said angrily: "This is a project that the empire has spent a lot of manpower and material resources and must succeed, so far, you are still making progress like this, you can all go to seppuku......

………

Today's three watches, the second one is sent! (To be continued......)