J-30 fighters, at the end of last year into small batch production, before the Lunar New Year is to complete the delivery of several J-30 fighters, this year, is the production rate of five or six J-30 fighters per month, has completed the delivery of twenty or thirty J-30 fighters.

The J-18 fighter entered small-batch production and manufacturing a little later, but the technical content of the J-18 fighter is slightly lower than that of the J-30 fighter, and the process is simpler than the J-30 fighter.

In other words, the production and manufacturing of J-18 fighters is not so complicated, and after entering the stage of small batch production, it can be seen that the number of eight or nine aircraft produced per month, or even ten aircraft, can be seen.

The production and manufacturing of J-18 fighters may catch up in terms of quantity, and the number of deliveries to the military may soon be equal to the number of J-30 fighters, or even exceed the number of J-30 fighters.

The military began to assemble J-30 fighters and J-18 fighters in batches, and after these two fighters enter stable mass production, the progress of the installation will be greatly accelerated.

Seongnam base.

The construction of the second phase of the project is nearing completion, and Li Tianfeng is wearing a hard hat and is inspecting accompanied by Zhou Ding, Lei Yong, Li Dawu and others.

The whole second phase of the project is full of super-large workshops, each of which is as small as 10,000 square meters and as large as 20,000 or 30,000 square meters, with very high standards, and many of them have completed the installation and commissioning of equipment.

Accompanied by everyone, Li Tianfeng walked into one of the large factories, and inside the plant, the equipment was installed in place, just waiting to start.

The ground is so clean that it can shine a human figure, and the brand-new, high-end equipment looks very gratifying, including a large number of imported high-end equipment. Of course, there is also quite a bit of domestic equipment.

This is a specialized manufacturing workshop, the production and manufacture of large parts on the fly, from the plant of the plant of nearly 100 meters of travel of large CNC gantry milling workers can be seen.

Zhou said: "Boss, this plant covers an area of more than 36,000 square meters, with a total of more than 310 sets of equipment. It can produce and manufacture super-large structural parts such as the main beam of the Y-30 transport aircraft. ”

Li Tianfeng said: "After such a plant is put into use, our production capacity will at least double, and it will also lay a solid foundation for the mass production and manufacturing of Yun-30 and Yun-25 transport aircraft in the future." ”

Li Dawu said: "Boss, when the second phase of the project is put into use, we will have an annual production capacity of 500 aircraft of various types, even if we produce and manufacture large aircraft like the Y-30 and Y-25 in the future, our annual production capacity will not be less than 300." ”

The production and manufacturing of large aircraft naturally consumes more manpower and material resources, and also occupies more production resources. If it does not produce large aircraft such as the Y-30 and Y-25, and only produces drones like the "Black Ghost", J-30 and J-18 fighters, the annual production capacity of the Chengnan base will definitely be more than 500 aircraft.

500 planes!

This is a very gratifying result, and it is also a figure that is easy to excite, and Li Tianfeng is obviously satisfied with the current production capacity.

Li Tianfeng said: "The second phase of the project has been put into use to form a production capacity. It will take about a few months. ”

Zhou Ding said: "Boss, three months." Give us three months, and the entire second phase of the project will be fully put into use, and gradually form a production capacity. ”

In the second phase of the project, there will be 20 or 30 factories, and all of them are huge production plants, and the number of skilled workers will be more than 15,000.

Recruitment of personnel. It has been started long ago, and a large number of skilled workers have been recruited, and when the second phase of workers is completed and put into use, these workers will go to their posts and start training. After training, you can gradually get on the right track.

Tianfeng Technology Company is famous, has good treatment, and is still engaged in the aviation industry, and has a feeling of "ascending to the heights, responding to the clouds".

Tianfeng Technology Co., Ltd. wants to recruit 10,000 thousands of front-line technical workers, and the applicants are like carp across the river, through selection, adhering to the principle of excellence, high standards and strict requirements, thousands of qualified candidates have been recruited.

These skilled workers will soon be on the job, and a second recruitment will begin soon, with thousands of high-standard and high-quality front-line skilled workers being recruited again.

The personnel in place is relatively good, coupled with reasonable planning, Zhou Ding is full of confidence, within three months, the second phase of the Chengnan base project is fully put into use, and gradually become a production capacity.

Li Tianfeng said: "Mr. Zhou, I will give you 5 months, and after 5 months, I need to see the hot and positive Chengnan base." ”

The Y-30 and Y-25 transport planes are still in the design and development stage, and it will take some time to enter the trial production, so the time is also sufficient.

Zhou Zhou Ding said confidently: "Boss, 5 months is enough, we will not let you down." ”

………

Chengnan base, No. 2 assembly plant.

Today, a group of special guests came here, accompanied by several military personnel, the chief of the general staff of the Pakistan Air Force and his party came to Tianfeng Technology Company.

The Chief of the General Staff of the Pakistani Air Force came in person, naturally not to visit Tianfeng Technology Company, but to participate in the delivery ceremony of the first J-18 fighter.

The first export J-18 fighter has been assembled off the assembly line and will be delivered to Pakistan.

"Oh, it's beautiful, even more beautiful than you see in the pictures."

The Pakistani personnel, including the chief of the General Staff, all exclaimed one after another, and everyone walked quickly to the front of the J-18 fighter.

As if they never got tired of watching it, and the more they watched, the more flavorful it became, the Pakistani personnel seemed to have forgotten the purpose of their visit this time, but instead surrounded the J-18 fighter plane and watched it with relish.

After looking around for two or three rounds, the chief of general staff of the Pakistani side even boarded the cockpit of the fighter plane and the plane, and after a long time, he remembered the purpose of his visit.

"Oh, I'm so sorry, I almost forgot that we had to hold a fighter plane delivery ceremony." The Chief of Staff said apologetically.

Li Tianfeng smiled slightly, and several military personnel next to him remembered the scene when the first J-18 fighter was officially delivered to the military.

As soldiers, especially air force personnel, no one can resist the charm of the J-18 fighter, and the Pakistani personnel, who are accustomed to living a hard life, naturally react a little bigger.

As you know, from today onwards, you will have the world's most advanced third-generation fighter and the king of third-generation fighters -- the J-18 fighter.

Li Tianfeng gave everyone enough time, and after everyone watched it for a long time, Li Tianfeng waved his hand to hold the delivery ceremony.

The entire delivery ceremony was completed in the presence of the military, and of course, hundreds of employees in the No. 2 assembly workshop were also witnessed.

Li Tianfeng delivered a brief speech, and the chief of the general staff of the Pakistani side had obviously prepared the speech for a long time, and he was full of enthusiasm and was very happy to speak a lot, and there was no lack of praise, which can be seen that the other party's love for the J-18 fighter and his gratitude to Tianfeng Technology Company.

Towards the end of the handover ceremony, Li Tianfeng and the chief of the general staff of the Pakistani Air Force cut the ribbon together, and then gently pulled the big red flower draped on the fighter plane, and the big red flower was pulled down from the fighter.

Then, the Pakistani personnel shook hands with Li Tianfeng and others warmly, and the J-18 fighter was slowly pulled out of the No. 2 assembly plant under the traction of the tractor.

When leaving the No. 2 assembly workshop, the chief of the general staff of the Pakistani Air Force turned around and glanced enviously at the J-30 fighters on the assembly line.

The general staff officer of the Pakistani side naturally knows about the J-30 fighter, and at the same time, he also knows that this is not for sale, and he can only envy it from a distance, and it is absolutely impossible to board the J-30 fighter, let alone order the J-30 fighter.

It is not possible to order J-30 fighters, perhaps Chinese J-20 fighters can be chosen. The Pakistani General Staff thought so.

Because the J-30 fighter began to be installed in the troops, the previously developed J-20 fighter project was not terminated, but continued, and the J-20 fighter was mainly exported.

The next day.

"Songzhou Daily" reported on the front page with an eye-catching headline that the first J-18 fighter was officially delivered to Pakistan.

With the report of "Songzhou Daily", soon, many media at home and abroad reprinted, and soon, it was known at home and abroad that the J-18 fighter had begun to be delivered to international users and began to fly out of China.

"The J-18 fighter has been exported!"

"The first J-18 fighter was delivered, and Pakistan was lucky to become the first international user of the J-18 fighter."

"It seems that the J-18 fighter has entered the stage of mass production, and I don't know how many J-18 fighters we are equipped with in China."

“……”

On the Internet, there was a heated discussion, and even, some netizens posted a large number of pictures of the J-18 fighter one after another, and the main parameters and performance of the J-18 fighter were also posted by everyone.

The reaction at home and abroad, Li Tianfeng saw it in his eyes and was happy in his heart, the attention of the J-18 fighter is so high, as an export-oriented fighter, it is very successful in commercial operation.

At the same time, Li Tianfeng has an idea in his heart, whether the J-18 fighter can become a star fighter, whether it can break the record, and become the fighter with the largest number of production and manufacturing in the world.

The world's star fighters can be traced back to World War II, and each star fighter is famous, like thunder, and the number of production and manufacturing is tens of thousands, even more than 20,000 aircraft.

In peacetime, if the J-18 fighter can surpass this achievement, there is no doubt that it is a huge affirmation of the J-18 fighter, and it also means that this is a very successful model.

In the office.

Li Tianfeng looked at the news about the J-18 fighter on the Internet, and thought in his heart that at this time, there was a knock on the door outside the office.

"Please come in!"

Hearing Li Tianfeng's voice, Xu Lilong pushed the door and walked in......

………

Today's three watches, the second one is sent! (To be continued.) )