Tang Zhiguo ordered, and Minister Zhao of the Technical Department of Risheng Company came over soon and walked over quickly, "Mr. Tang, are you looking for me?" ”

Tang Zhiguo said: "Minister Zhao, take a look at the processing technology card of this counting car process, and see if there is any problem?" ”

Hearing this, Minister Zhao picked up this processing technology card, looked at it seriously, and after reading it, Minister Zhao said: "Mr. Tang, I think there should be no problem with this processing technology card, the process steps, process parameters, and operation methods are very detailed, according to our company's technical strength, it is far from being able to compile such a level of processing technology regulations." ”

Tang Zhiguo said: "Minister Zhao, is there really no problem?" ”

Minister Zhao said: "There should be no problem, but the key is to try to know, according to the process requirements, process a part to know." ”

Minister Wang of the manufacturing department next to him and Master Yang, a number of lathes, glanced at each other, and Minister Wang said: "Minister Zhao, there must be a problem with the process regulations, such a high turning speed, a piece of several turning blades has to process 6 parts, or even 11 parts, I don't believe it anyway." ”

Master Yang, a number of lathes next to him, also said: "Minister Zhao, according to my many years of processing experience, such a high turning speed, such a large feed, a blade may not be able to process a single part and be scrapped, where can you process 6 parts, coax ghosts." ”

Minister Zhao smiled wryly.

Tang Zhiguo next to him said: "Minister Zhao, do you think that the process parameters on this process specification are reasonable?" ”

Minister Zhao said: "I can't say, I haven't used such processing parameters to process parts, everything has to try to know." ”

Thinking about it, Minister Zhao added: "Mr. Tang, it is not that the lower the turning speed, the smaller the feed. Turning tools can process more parts, and sometimes, using high-speed and high-feed turning, as long as the parameters are selected reasonably, the same turning tool can show amazing economic benefits. ”

"Oh." Tang Zhiguo asked, "Is there such a thing?" ”

Minister Zhao said: "Of course. The smaller the turning speed, the smaller the feed, and the slower the wear of the turning tool, which is generally true, but in this way, the same part, using high-speed and high-feed turning, may only take one minute to complete the machining. And if you turn at a low speed with a small feed, it may take more than ten minutes to machine a part, and that's where the problem comes. ”

After a pause and sorting out his thoughts, Minister Zhao said: "The same piece of blade, using high-speed and large-feed turning, the life of the blade may be five minutes, and one part can be processed in one minute. Five parts can be machined with one blade; Turning at low speeds and small feeds results in a slightly longer insert life. It may be ten minutes, but because of the slow machining speed, a single insert may only be able to machine one part in a lifetime. ”

After Minister Zhao finished speaking, Tang Zhiguo nodded, "Minister Zhao, what you said is very reasonable. Why don't we give it a try? ”

Minister Zhao nodded and agreed: "Mr. Tang, let's try it according to the processing technology of Tianfeng Technology Company, and we will know everything." ”

Minister Wang of the manufacturing department next to him hurriedly said: "Mr. Tang, don't." This batch of retaining ring parts of Tianfeng Technology Company, this batch has a total of 56 pieces, and we are required to deliver 56 qualified parts. ”

At this moment, Tang Zhiguo was full of courage, and waved his big hand and said: "It will be processed in accordance with the process regulations of Tianfeng Technology Company, and it will be decided, if there is any problem, I will personally go to Tianfeng Technology Company to explain." ”

That's it!

Master Yang, a number of lathes, shook his head slightly, and was not optimistic about the process regulations of Tianfeng Technology Company, but Tang Zhiguo said so, so he could only do it.

According to the process requirements of Tianfeng Technology Company, Master Yang operates step by step, sets the tool, adjusts the parameters, aligns, etc., everything is more proficient, everything is ready, close the safety door of this CNC lathe, press the start button, the machine starts the process, and begins to turn parts.

The turning speed is very fast, it can be seen from the reaction of the machine tool, this is a domestic CNC lathe, and the imported high-end CNC lathe can not be compared at all, now it is a high-speed large feed turning, the response of the machine tool is a little big, however, fortunately, it does not affect the processing, within the allowable and normal range.

Tang Zhiguo, Minister Wang, Minister Zhao, etc. are next to this machine tool, everyone looks at the processing of parts, everyone's mentality is different, Tang Zhiguo and Minister Zhao of the Technical Department are worried, worried about the failure of processing, Minister Wang of the Manufacturing Department is a good show mentality, I have long thought that such processing, there will definitely be problems.

The processing is very fast, in just two or three minutes, the part on the machine tool is finished, the tool holder begins to retract, the program stops, and the machine stops.

As a math worker with many years of experience, Master Yang has been looking at the processing situation, and he can't help but be slightly surprised when he sees that the processing sound has been very normal, and the processing is completed so quickly.

The processing speed is so fast!

After being slightly stunned, Master Yang opened the airport security door, blew the coolant on the parts with an air gun, first looked at the parts, and looked at the turning knives, the look of surprise on his face was even stronger.

No way!

Master Yang almost exclaimed, seeing Master Yang's expression, Tang Zhiguo's heart tightened, and he thought in his heart, could something be wrong, so he immediately asked anxiously: "Master Yang, something is wrong?" Scrapped parts? ”

In addition to being surprised, Master Yang sighed for a while, and suddenly, he admired Tianfeng Technology Company and said with admiration: "Mr. Tang, the parts are processed very beautifully, and the tool loss is also very small, and this processing process is amazing!" ”

"Really." Hearing this, Tang Zhiguo was pleasantly surprised, immediately took a few steps forward, approached the machine tool, and looked seriously at the part that had just completed this process.

"Amazing, amazing, worthy of Tianfeng Technology Company." Tang Zhiguo also admired it in his heart.

At the same time, Tang Zhiguo felt a burst of happiness in his heart, fortunately he had just processed in accordance with the processing technology regulations provided by Tianfeng Technology Company.

Minister Wang of the manufacturing department next to him, with a puzzled face, also came up, personally looked at the processing of parts and the wear of the tool, after a look, he said in his heart, impossible, unreasonable, how can this be?

Tang Zhiguo was in a good mood, and he didn't care about Minister Wang, and waved his hand and said: "Master Yang, continue to process, let's take a look at the follow-up processing in person." ”

The processing was very smooth, and the processing speed was so fast, Master Yang immediately began to process the second part in addition to his admiration for Tianfeng Technology Company.

Such a processing, almost out of control, less than half a day, the successful completion of this batch of a total of 56 parts of the processing, all successfully completed the number of car process, very smooth, in addition, parts processing quality first-class, all qualified, no deviation.

After processing this batch of parts happily, Master Yang said: "Mr. Tang, I can't believe that there is such a process regulation, according to such a process, a piece of first-class quality parts are processed, and the speed is very fast, and the tool loss is very small." ”

Tang Zhiguo has been beside the machine tool, has been watching this batch of parts all complete the processing of this process, at this moment, Tang Zhiguo has no worries in his heart, on the contrary, he is happy in his heart, and his heart is even more calculated.

The processing speed is so fast, the tool loss is so small, and the processing quality is so good, Tang Zhiguo, who was still worried about losing money, made a rough calculation, and he was also shocked, if he continues to process like this, where will he lose money, not only will he not lose money, on the contrary, there will be good profits.

Tianfeng Technology Company is amazing!

In addition to admiring Tianfeng Technology Company, Tang Zhiguo thought in his heart, Tianfeng Technology Company has such technological strength, then their profits from processing parts will be very high, if their own Risheng Company, one day, can reach the technical strength level of Tianfeng Technology Company, no, as long as it reaches half the level, then ......

Tang Zhiguo couldn't imagine it......

…………

Tianfeng Technology Company.

Since the last time the bidding was successfully completed at the State Guest Hotel, it has been more than half a month, and a lot of information has also been reflected to Li Tianfeng.

Many companies that process parts for Tianfeng Technology Company have complained that they have lost almost all of their pants, and they have asked to increase the processing costs, otherwise, the processing will not be able to continue.

There are also some companies complaining that the parts requirements are too high, too difficult to process, and the processing quality is difficult to guarantee, and they are required to give a certain number of parts scrapped.

In the first few days, Li Tianfeng was inexplicable, these parts were processed in Tianfeng Technology Company, the situation was good, the quality was excellent, and they all belonged to the category that was relatively easy to process and had relatively low technical content.

Could it be that the water and soil are not adapted?

After wondering for a few days, Li Tianfeng vaguely understood the reason, so he ordered Zeng Qinghai to send out a few process teams to go to these companies full of complaints to conduct process inspections.

It turns out that these enterprises have failed to process in strict accordance with the machining technology provided by Tianfeng Technology Company, and have changed the processing parameters without authorization, and even the process plan is commonplace.

Tianfeng Technology Company's processing process regulations, after countless batch parts processing verification, has been very mature, very perfect, how can it be changed at will.

As a result, Li Tianfeng had to send several process guidance teams to these factories to correct them one by one, and what made Li Tianfeng strange was that there was only one company called Risheng Machinery Processing Company, which not only did not complain, but also called to report the good news.

…………

Today's three watches, the third one is sent! (To be continued......)