Hearing the voice, Li Tianfeng immediately looked over, and saw the receiver of the precision machining center, with a dissatisfied face, counting down a young man who had delivered the goods.

Chengxin company, Li Tianfeng naturally knows, in Songzhou City, is also a relatively powerful mechanical processing company, a private enterprise, with a registered capital of more than 50 million, nearly 200 employees, including more than a dozen technical personnel.

Whether it is processing strength or technical strength, it should belong to the upper level among the machinery companies that take processing business from factory E.

The young man sent over happened to be a batch of parts, which had been unloaded from the car and stacked on the ground next to him, Li Tianfeng was more strange in his heart, how could these parts not be packed in a parts box, such a large number, plus the bumps in the transportation process, it was inevitable that there would be problems.

And these parts are relatively rough processed, and compared with the parts sent by themselves, it is several grades worse. The appearance is so poor, whether the size will be out of tolerance, is still a problem.

"Look at you, don't you know how to use a protective box to assemble the parts one by one? What should I do if I pile it up like this and there is a scar? "The receiver was very dissatisfied.

The young man who delivered the goods said with a smile: "Sister Zhang, our company's recent business volume is large, and the protective box is just all used up. ”

Coincidentally, Cheng Gang passed by here, heard the sound and came over immediately, saw the parts piled up on the ground, and thought to himself, play the piano indiscriminately, this is an aviation part, I thought it was an agricultural machinery part.

"Director Cheng, look?" The consignee, Sister Zhang, asked Cheng Gang for instructions.

Cheng Gang waved his hand impatiently and said: "Put it aside, wait a minute, call the inspector to come and check it, and all the unqualified ones will be returned." ”

Cheng Gang is also more annoyed, a lot of machinery processing plants, processing civilian products are used to, quality awareness is not good, like this Chengxin company, there is no protective box, actually sent the parts over like this.

"The next time it happens, it's all going back." Cheng Gang said unhappily.

Sister Zhang, the receiver, nodded hurriedly, and then waved to Li Tianfeng's double-row seat, signaling to drive over to unload.

The two-row truck drove a few meters forward and stopped next to Sister Zhang, and Xiao Zhao and Lao Liu, the driver, carried down the parts on the car one by one.

This is a professionally designed parts protection box, wooden protective box, painted with blue paint, there are partitions in it according to the size of the parts divided into several small compartments, a compartment to put a part, a box depending on the size of the parts, placed three or five pieces.

In this way, the parts are well protected, because each part is separated and no bruising occurs.

"Hey, Tianfeng is you, why did you come here in person." Seeing Li Tianfeng get out of the car, Cheng Gang was surprised.

Li Tianfeng used to be from Factory E and also from the precision machining center, and when he suddenly saw Li Tianfeng, Cheng Gang was happy in his heart and immediately greeted him warmly.

Tianfeng Technology Company, Cheng Gang himself knows that some leaders of E Factory, some people who pay attention to Li Tianfeng's recent situation basically know this company, and even, many people secretly admire Li Tianfeng, but they didn't think that in just a few months, such a big move was made.

Li Tianfeng was also full of smiles, and said happily: "Director Cheng, of course I will personally send the first batch of parts." ”

"It's been processed so quickly, I remember it's only been three days." Cheng Gang was a little surprised by Li Tianfeng's efficiency.

Li Tianfeng said with a smile and jokingly: "We now have dozens of machine tools and equipment, including millions of CNC machining centers, such a little parts, we can't plug the teeth, today, I have to bring more blank parts back." ”

"No problem." Cheng Gang agreed, because Yang Xianfeng had already instructed him to order more than a dozen parts with drawing numbers for Li Tianfeng to process.

As soon as the words changed, Cheng Gang said: "However, the processing quality must be absolutely guaranteed, and it can't be like Chengxin Company just now." ”

"That's natural, why don't Director Cheng take a look at the quality of our parts for himself?"

Cheng Gang really wanted to take a look at the quality of the parts sent by Li Tianfeng, so he immediately walked over, and when he saw these parts, his expression was overjoyed.

Next to it are the parts sent by Chengxin Company, and here are the parts sent by Li Tianfeng.

"Tsk, Tianfeng, I didn't think about it, you all did such a good job of rough machining, the parts not only have no burrs, no bruises, no surface defects, the size of this part, you don't have to think about it, it won't be bad."

Seeing Cheng Gang's praise like this, the young man from Chengxin Company seemed to be unconvinced, and quietly glanced over, and looked at Li Tianfeng's parts, completely stunned, this, this is a rough machined part, which is comparable to the quality of finished parts.

I can't imagine it, it's incredible!

Li Tianfeng smiled happily and said: "Director Cheng, all the parts that our Tianfeng Company undertakes to process, at least this quality condition, and even better than this in the future." ”

"That's good, that's good, let's go and sit in my office." Cheng Gang invited.

Li Tianfeng also readily agreed, and said to Xiao Zhao who accompanied him: "Xiao Zhao, Lao Liu, you will go back first after you handle the things here, and you don't have to wait for me." ”

"Okay, Mr. Li." The two said in unison.

Li Tianfeng and Cheng Gang walked side by side, talking and laughing, and walked towards Cheng Gang's office.

In Cheng Gang's office, Li Tianfeng sat for about half an hour, not only in Cheng Gang's office, but also went to Peng Xuehai's office for a while, and then went to Liu Qingshan and Yang Xianfeng's offices.

Yang Xianfeng's office.

The two were chatting heartily, like old friends, Yang Xianfeng knew that Li Tianfeng was now the CEO of a large company, with a bright future, so he naturally would not put up a fight, and the atmosphere of the chat was very good.

"Tianfeng, in a few months, I'm a little surprised to make such a big move, I really want to go to you to have a look." Yang Xianfeng said with a smile.

"Mr. Yang, welcome at any time."

Yang Xianfeng is more curious about Tianfeng Technology Company, and has heard a lot about Tianfeng Technology Company, but he has never gone to the site to take a look.

"Tianfeng, the precision machining center has called to report just now, your first batch of parts has been delivered, and the quality is very good, not bad, not bad." Yang Xianfeng said happily.

"Mr. Yang, I still want to take more parts back for processing."

"Well, I'll think about it." Yang Xianfeng sighed and said: "I will give you a few more drawing numbers, and I will give you all the processes before the aging of the turbine disc of turboprop B and turbofan B, and I will not have more." ”

The processing cost of these turbine disks is much higher than that of turboprop B compressor disks, because the turbine disks not only have a larger machining allowance, but also the material is a high-temperature alloy, which is very difficult to process, and the tool is very worn out in processing.

The turbine disc is good, and the superalloy is good!

Li Tianfeng was happy in his heart, these parts not only have high processing costs, but also the metal scraps of superalloy are worth a lot of money, and the cut superalloy metal scraps can be sold for a lot of money.

However, Li Tianfeng will not be satisfied with just these few numbers, his company will grow rapidly, a large number of personnel will be recruited and other ways in place, after the company framework is built, it will need a lot of parts processing, just like waiting for rice to be cooked.

"Mr. Yang, when is the annual bidding for the outsourcing processing business of Factory E?" Li Tianfeng asked tentatively.

Every year, Factory E will hold such a bidding meeting, and outsource some non-important parts, parts with slightly lower technical content, and some processes for processing, and give these processing operations to some powerful factories through bidding.

For example, most of the parts of rough machining, semi-finishing, some welding, casting business, etc., the annual outsourcing business output value of three or five billion.

Next year, with the country's intensification of the aviation industry, the output value of Plant E next year will increase substantially again, and next year's outsourcing processing business will also increase.

Li Tianfeng asked, Yang Xianfeng was naturally very, and said with a smile: "Tianfeng, the annual bidding for outsourcing processing business is about the end of December, and the specific date has not been determined, but there is only one month left, and you must be prepared if you want to participate in the bidding." ”

Li Tianfeng nodded, "Mr. Yang, don't worry, you must be fully prepared to participate in this bidding." ”

In Yang Xianfeng's office, Li Tianfeng stayed for thirty or forty minutes, which is a relatively long time, Yang Xianfeng, as the deputy general manager and chief engineer of Factory E, is usually busy, and Li Tianfeng's time control is still relatively good.

After returning from Factory E, Li Tianfeng buried himself in writing a recent work plan in his office, and wrote down some key tasks in his notebook one by one.

The first thing was to participate in the winter talent recruitment fair in Songzhou, and the specific matters of participating in the job fair had already been done safely, and at that time, Li Tianfeng was ready to participate in person.

The second thing is the procurement of machine tools, the second batch of machine tools, the number of dozens of units, a small number of domestic machine tools, Taiwan machine tools also have a part (such as Taichung precision machine tool equipment), in addition, there are several Swiss and German equipment.

These foreign equipment, Li Tianfeng entrusted the domestic machine tool equipment intermediary company to purchase, although the price is a little more expensive (to pay the intermediary agency fee), but the quality of foreign equipment is good, the price does not matter.

The third thing is the construction of the company's plant, which is temporarily in charge of his brother-in-law Sun Kang, but Li Tianfeng also spends a lot of energy paying attention. Now, the first plant has been completed and put into use, and the second plant is also nearing completion, in addition, there are planned technology centers, material centers, surface and heat treatment centers, casting engineering centers and so on. These will be built one by one.

The fourth thing......

On his notebook, he wrote a lot densely, and Li Tianfeng found that he had a lot of things to do recently.

"Knock, knock, knock......"

As soon as he closed his notebook, there was a knock on the door outside the office, and Li Tianfeng said loudly: "Please come in!" ”

Ouyang Feifei smiled, came in with a cup of freshly brewed hot tea, and said thoughtfully: "Tianfeng, drink a cup of hot tea to refresh yourself, don't be too tired." ”

"Hmm." Li Tianfeng nodded.

At the beginning, shortly after Li Tianfeng resigned from Factory E, Ouyang Feifei also resigned and came to Tianfeng Technology Company, which is currently mainly an administrative management company, which is relatively easy.

I1153