Such a large group of people, the formation is very large, attracting the attention of many people, many workers have looked at it from a distance, and they have guessed in their hearts which big leader is coming.

Li Tianfeng's eyes were calm, looking at this posture, Li Tianfeng guessed that this might be Zhu Maohua, the new chairman and general manager of E factory, Li Tianfeng stood calmly next to the broaching machine.

This imposing middle-aged man is indeed Zhu Maohua, the new chairman and general manager of Factory E, who is absolutely authoritative in Factory E. Zhu Maohua has been in office for a while, but today is the first time to come to the precision machining center.

Knowing that the precision machining center undertakes the processing of most of the key parts of the turboshaft C engine of the key model, I heard that some time ago I encountered a big problem in the processing of the blade disc of the first to third stage compressor of the compressor, and I heard that it was solved later.

This time, I heard that there was a problem with the first stage of the turbo disc launched by the turboshaft C, so Zhu Maohua was ready to come over to take a look, and by the way, also take a look at the precision machining center, which brings together a large number of the most cutting-edge equipment in the entire E factory.

Walking next to this vertical broaching machine, Zhu Maohua saw the first stage turbine disc of the semi-finished turboshaft C next to the machine tool, and looked at it with interest, Zhu Maohua asked: "Mr. Yang, this is the first stage turbine disc of turboshaft C?" ”

Yang Xianfeng, deputy general manager and chief engineer, immediately said: "Mr. Zhu, this is the first stage turbine disc of the turboshaft C, which is now a semi-finished product, and is waiting for the broaching process here. ”

Zhu Maohua said: "I heard that there are four parts in this batch, and one has been scrapped in this broaching process?" ”

Several leaders of the peripheral precision machining center, such as Peng Xuehai, Cheng Gang, and Chen Xiangchun, all blushed, it is really a good thing not to go out, and a bad thing to spread thousands of miles, I didn't expect even Zhu Maohua to know about a scrapped part.

Yang Xianfeng said: "There is a little problem in the broaching process for the time being, but we will concentrate our technical strength to overcome this problem. ”

Hearing this, Zhu Maohua made an instruction: "Then we must do our best to solve this processing problem and process these three parts as soon as possible." ”

Zhu Maohua's instructions were naturally taken to heart. And when Li Tianfeng saw so many people, the position where he was standing was a little conspicuous, almost standing next to Zhu Maohua, Li Tianfeng couldn't help but prepare to retreat to the side.

However, Zhu Maohua's energy is indeed too big, full of aura, and there are many big and small leaders around him, and Li Tianfeng can't retreat even if he wants to. It immediately attracted Zhu Maohua's attention.

Zhu Maohua saw that Li Tianfeng's eyes were not a little nervous, and he couldn't help but be secretly surprised, glanced at Li Tianfeng more, and then said calmly: "Young man, you are the technician in charge of this broaching process." ”

Now, Cheng Gang, the technical director of the precision machining center, has handed over the broaching problem of the turbine disc to himself, which can be regarded as the chief technician of this broaching process, thinking so in his heart, Li Tianfeng nodded and said: "Mr. Zhu, I am Li Tianfeng, the chief technician of this broaching process." ”

"Xiao Li, tell me about the situation of this broaching process, and if there are any difficulties, you can raise them." Zhu Maohua's tone was very peaceful, with a bit of cordiality and affinity.

Li Tianfeng said: "The first part is not through my hands, I only have a little understanding of the processing situation at that time, I am thinking about the processing of the next three parts, although the problem is more tricky, but I still have more than eighty percent certainty." ”

Huang Xuewen, deputy director of the Engineering Technology Department, didn't know when he squeezed over, and said loudly: "You are a newcomer who has only been working for three years, and you will definitely not be able to solve such a processing problem. ”

Li Tianfeng didn't expect that this Huang Xuewen actually came out, and his tone was not good, and he accused himself loudly, you know, the new chairman and general manager of Factory E are here, sure enough, Zhu Maohua frowned slightly, obviously a little dissatisfied with Huang Xuewen.

Li Tianfeng knew very well in his heart that this Huang Xuewen must have wanted to show his face in front of Zhu Maohua, but if he did it like this, he was probably messed up.

Huang Xuewen may also suddenly realize that he is a little impatient, and he very much wants to show himself in front of the new leader, but now it seems a little hanging, because Huang Xuewen himself also noticed that Zhu Maohua's brows were slightly furrowed.

So, Huang Xuewen, who was anxious to recover, immediately said: "Mr. Zhu, the turbine disc broaching process of the turboshaft C engine is very difficult to process, and it is the first time we have encountered powder metallurgy superalloys, if it is handed over to a newcomer, there will definitely be a big problem." ”

Zhu Maohua's brows furrowed even deeper, and there was a bit of coldness in his tone: "Who are you?" ”

That's right, who are you, what are you, so many leaders around you didn't speak, you just jumped out like this, not to mention that Zhu Maohua really didn't know Huang Xuewen.

Huang Xuewen saw Zhu Maohua's cold tone, his heart jumped, and he was almost scared in a cold sweat, and he was about to say that he was Huang Xuewen, deputy director of the Engineering Technology Department, but he didn't expect to open his mouth yet, only to see Zhu Maohua wave his hand impatiently.

So many people watched, and there were several giants of Factory E, suddenly, Huang Xuewen's aggrieved face turned red, and his mouth opened a few times, but he didn't dare to say anything more.

Seeing this, Li Tianfeng wanted to laugh happily in his heart, he really wanted to laugh three times, and the joy in his heart was like drinking cold ice water in June. Suddenly, Li Tianfeng glanced at Huang Xuewen with a smile on his face.

After Zhu Maohua waved his hand, he didn't care whether Huang Xuewen was a turtle or not, and after waving away this annoying Huang Xuewen, Zhu Maohua put on a kind face, and even smiled a little, and his tone was very peaceful.

"Xiao Li, you said that the follow-up processing is more tricky, can you tell me what the difficulty is?"

Li Tianfeng thought for a while and replied: "Mr. Zhu, the processing difficulty is on our equipment, our vertical broaching machine is a bit old, the stroke is short, the power is slightly insufficient, the pulling force is a little insufficient, in addition, the accuracy of the broaching machine is a problem. ”

Hearing this, Zhu Maohua said: "Can you change to a better device?" ”

Yang Xianfeng, deputy general manager and chief engineer next to him, took over the topic and said: "Mr. Zhu, you may not know much about the situation of our factory when you first came, due to the technical blockade of foreign countries, it is difficult for us to buy high-precision CNC broaching machines. ”

Suddenly, Zhu Maohua was silent, pondered, and after a long time, Zhu Maohua said: "I am thinking of a way to deal with the equipment in the future, and the key for us at present is to process the first and second stage turbine disks of the turboshaft C engine." ”

The turboshaft C engine has a total of two turbines, and the first and second stage turbine discs are all processed in the precision machining center, because the first stage turbine disc has a problem in the broaching process, and the second stage turbine disc also stops before the broaching process.

Peng Xuehai, director of the precision machining center, has been standing quietly aside, at this time, seized the opportunity to speak, "Mr. Zhu, our Li Tianfeng is good, the processing problem of the first to third stage compressor blade disc of the front turboshaft C engine is solved by Xiao Li Shun. ”

Li Tianfeng solved one processing technical problem after another, and Liu Qingshan, the deputy chief engineer next to him, recently had a little appreciation for Li Tianfeng, so Liu Qingshan took the opportunity to say: "Mr. Zhu, Comrade Xiao Li is really good, and he has solved a lot of processing technology problems recently." ”

Liu Qingshan, as the deputy chief engineer of Factory E, spoke with a bit of weight, so Zhu Maohua glanced at Li Tianfeng seriously, and then, Zhu Maohua's actions greatly surprised everyone.

Zhu Maohua put on a smiling face, kindly patted Li Tianfeng's shoulder and said: "The young man is good, we will not treat people who have technical skills at a loss, work hard, and go all out to solve the broaching processing of the first and second turbine disks." ”

After speaking, Zhu Maohua said to Liu Qingshan next to him: "Mr. Liu, in terms of technology, you can give young people more opportunities to exercise and give more support." ”

Everyone looked at Li Tianfeng with envy, but they didn't expect that Li Tianfeng, who was the most popular among this large group of people, not only received high praise from the new leader of E factory, but also left a good impression in the minds of the top leader.

Li Tianfeng's mood was naturally good, and he thought in his heart, this can be regarded as a good face.

Li Tianfeng said: "Mr. Zhu, I will go all out, if there is any difficulty, I will find Mr. Liu and Director Peng." ”

"Okay, okay." Zhu Maohua looked very happy, and patted Li Tianfeng's shoulder kindly.

Liu Qingshan and Peng Xuehai also glanced at Li Tianfeng approvingly, and the two knew that Li Tianfeng was repaying Li with a peach, and the two of them spoke for Li Tianfeng just now, and Li Tianfeng immediately mentioned the names of the two in front of Zhu Maohua.

All around, the envious eyes could almost engulf Li Tianfeng, and everyone thought in their hearts, it would be good if they were Li Tianfeng, and Li Tianfeng's luck was really good to leave such a good impression in the minds of the new leader of the E factory.

Zhu Maohua was in a good mood, accompanied by everyone, inspected the entire precision machining center with great interest, and when he left, Zhu Maohua gave the precision machining center full affirmation, which made Peng Xuehai very happy in his heart.

……

Back in his office, Zhang Can, He Baitao, and Li Dawu in the office stood up one after another, and congratulated Li Tianfeng with a smile, and Zhang Can even said: "Brother Li, I envy you so much, I heard that Mr. Zhu admires you very much." ”

Li Tianfeng said: "Don't envy me, although I showed my face in front of the leader this time, but the arduous task followed, we must go all out to solve the broaching problem of the first and second stage turbine disks of the turboshaft C engine." ”

………

Thank you again for the third reward from the readers of "Novel Hobby!!

In addition, the new book period is very much in need of everyone's clicks, recommended votes, and collections, and I look forward to your strong support!!

………