On the eighth day of the first lunar month, Tianfeng Technology Company officially went to work.

On the first day of work, early in the morning, at about 7:30, Li Tianfeng led the team, and a group of middle and senior leaders of Tianfeng Technology, wearing new and neat work clothes, stood neatly at the gate of the main factory to welcome the employees to work.

Li Tianfeng smiled, watched his employees go to work happily, and from time to time, he would congratulate everyone, Happy New Year!

The employees at work, seeing their bosses and a group of middle and senior leaders, standing neatly at the gate of the factory, greeted themselves to work with a smile, and congratulated themselves on a happy new year.

"Bang, bang, bang......"

This time, on the first day of work in the New Year, Tianfeng Technology Company prepared a lot of fireworks, at this time, under the guidance of Cai Bin, the Minister of Security, fireworks are being set off.

"Wow! It's so pretty!! ”

Even in broad daylight, everyone can still vaguely see the beauty and grandeur of the fireworks, and many employees look at the air with relish.

"This firework is set off, two words - atmospheric !!"

Many employees, seeing this beautiful and spectacular fireworks, immediately praised, Tianfeng Technology Company factory area, some open places gathered a lot of employees, everyone's face is bright, obviously very happy, very proud.

The fireworks set off lasted for about twenty minutes, and at eight o'clock, Li Tianfeng waved his hand, and also took everyone to close the team and return to their posts, next. It is to distribute New Year's red envelopes to employees.

Liu Wei has already prepared these red envelopes, and today's red envelopes are distributed, with so many people, it is impossible for Li Tianfeng to do it himself. Instead, it is handed over to the heads of various departments to distribute by themselves, which is also a good opportunity for everyone to get closer to the employees below and establish their prestige.

For example, Zeng Qinghai received a lot of red envelopes and happily returned to his process technology department. The No. 1 production workshop has the most employees, and the workshop director Tan Ke happily received nearly 200 red envelopes and happily went to the No. 1 production workshop.

Today is a day of joy. It's also a day full of festive spirit!

The employees who got the red envelopes were even more happy in their hearts, and the whole atmosphere came up, and everyone's faces were full of joy.

"Wow! Six hundred! ”

"Yes, satisfied!"

"Such a thick red envelope. Boss atmosphere! ”

"Haha, go have a good drink after work!"

In the morning, Li Tianfeng walked around the subordinate departments, expressed his condolences to everyone, and sent out a lot of red envelopes. Happy New Year, boss!

I walked around my company and expressed my condolences to everyone. At about ten o'clock in the morning, Li Tianfeng went to Factory E again, sat in the offices of Zhu Maohua, Hu Lianggu, Yang Xianfeng, Liu Qingshan, etc., and at the same time gave him a small gift that he had prepared a long time ago.

Of course, Li Tianfeng also went to the precision machining center of Factory E and went to Peng Xuehai. Cheng Gang and others sat in their offices, and also looked at their former group of colleagues.

Former colleagues saw Li Tianfeng. Full of joy, and even a little envy and compliment. After all, the current Li Tianfeng is no longer the small technician he was at the beginning, but the boss of a large enterprise.

In the afternoon, Li Tianfeng returned to Tianfeng Technology Company, knowing that today is the first day of work in the New Year, and everyone basically does not have to work.

Originally, he wanted to further improve the turbine shaft design outline, but Li Tianfeng quickly gave up, because his subordinates came to his office one after another, and expressed New Year's congratulations to him in the name of reporting work.

The first day of work passed like this, on the ninth day of the first month, Tianfeng Technology Company officially stepped into the right track, and the production atmosphere gradually came up.

As soon as he went to work in the morning, Li Tianfeng held a meeting of middle and high-level leading cadres, and as soon as he entered the production site, he obviously felt this atmosphere, and Li Tianfeng was very happy and satisfied.

New year, new atmosphere, this year is a year full of hope.

Thinking that he was starting to prepare and further improve the design outline, Li Tianfeng felt as if he was full of energy and high spirits!

The processing of the vortex C flame cylinder continued, and the finishing of a flame cylinder was completed before the Spring Festival, and the processing quality was excellent, Li Tianfeng's new process of opening up a new path was completely reasonable and feasible, and the next five flame cylinders immediately began to continue processing.

When Li Tianfeng was inspecting the No. 1 workshop, he happened to pass by the German precision counting car, and saw that Master Zhou was processing seriously, so he couldn't help but nod his head lightly, and didn't bother, but just took a look at it on the side.

In addition to the processing of the turboshaft C flame cylinder, the list that Li Tianfeng gave Zhu Maohua last time included dozens of parts numbers in the mass production models of Factory E, among which some parts blanks have been shipped to the No. 1 processing workshop of Tianfeng Technology.

Even, there are some parts that have begun to be roughed, such as the blank of the ninth-stage disc of the turbofan B compressor is beginning to be roughed.

Turbofan B compressor is a subsonic compressor, a total of nine levels, the basic materials of each part are made of titanium alloy materials, such as titanium alloy TC4, the ninth compressor wheel is also made of titanium alloy materials, in the compressor a total of nine levels of roulette, the diameter of the finished product belongs to the largest, the maximum diameter is 275 mm, the outer circle has a tenon groove for installing blades, and there are 32 precision positioning holes evenly distributed around the inner point, which are used to install tension bolts, in addition, the wall thickness of the parts is very thin, The thinnest part has a wall thickness of 2.1 mm, which is easy to produce processing deformation, and is one of the more difficult parts to process.

The dozens of parts that Li Tianfeng asked for from Factory E are all relatively difficult to process, and this ninth-level roulette wheel is just one of them.

"Master Ding, how is the processing?"

Seeing that a CNC lathe was roughing the roulette, Li Tianfeng stepped forward and asked with concern.

Master Ding, a worker who was processing, recognized Li Tianfeng and immediately said: "Mr. Li, the processing is very smooth, you see, this is the part that has been processed." ”

In the wooden box next to it, there are already a few parts that have completed this rough processing, the parts are not heavy, Li Tianfeng picked up one, looked at it seriously, and even measured a few more important sizes with calipers, and the processing quality of the parts was good.

Li Tianfeng said: "Yes, although rough processing is not difficult, but it cannot be taken lightly, it must be operated in strict accordance with the process regulations, and it must not be sloppy." ”

Master Ding, the worker, nodded, "Mr. Li, you can rest assured that you have been operating in accordance with the process regulations." ”

"Hmm." After nodding, Li Tianfeng thought in his heart, this part is not difficult to rough, the key is the finishing in the back, which is a test for everyone, and when you enter the finishing process, you have to take a look for yourself.

After inspecting the processing site, Li Tianfeng returned to his office and began to prepare the design outline in earnest.

For several days in a row, Li Tianfeng's main energy was focused on compiling the design outline, improving various parameters, configuring some basic sketches, and even making a lot of improvements in the overall performance of the engine, new materials, and new designs.

……

E factory, sheet metal workshop.

On the inspection platform in the incoming inspection area, it is neatly and neatly, lined up, and a total of six pieces of vortex shaft C flame cylinder are placed, which is the flame cylinder that has completed all the finishing processes and is only waiting for laser drilling, that is to say, as long as the laser punching is completed, after thousands of small holes are processed by laser on the flame cylinder, the flame cylinder is the final product.

Before laser punching, it is customary for the sheet metal workshop to conduct a routine inspection to check the relevant dimensions, technical requirements, etc. again.

Inspector Master Zhao was wearing snow-white gauze gloves and holding measuring tools, and was carefully inspecting, and while checking, the surprise on his face continued one after another.

"It's impossible, this size is also all qualified, six parts, without exception, all qualified!" Inspector Master Zhao looked surprised.

The vortex C flame cylinder has not been inspected before, in the past, every time a flame cylinder came to carry out laser punching, it was checked by the inspector Master Zhao, in the impression of this inspector, every time the flame cylinder came over, this size has basically not been qualified, and it is always out of tolerance.

"Lao Zhao, what's the fuss about?" Not far away, there was also an inspector who was inspecting other parts, and when he saw the inspector Lao Zhao, he was surprised and couldn't help but ask curiously.

"Lao Zheng, take a look, these six pieces of vortex C flame cylinders are all qualified, and even this key size is not out of tolerance!"

"Oh, there's such a thing?" Lao Zheng is also one of the old experienced inspectors, knowing the previous quality status of the vortex C flame cylinder, which was basically not qualified, and now, all six flame cylinders are qualified.

"No, all qualified!"

Lao Zheng said: "Our factory can finally process this part to qualification, not bad, amazing." Obviously, Lao Zheng also knew the difficulties of processing these parts.

"Lao Zheng, these are not processed by our factory itself, but by Tianfeng Technology Company, and there are product certificates and measured value records of the size that they brought with the parts."

Tianfeng Technology!

Lao Zheng was stunned, and said with emotion in his heart: "Their processing strength is so strong!" ”

Just as Lao Zheng was stunned, not far away, a group of people came over, the battle was very large, many workers who were working looked sideways, inspector Lao Zhao also saw it, and saw the person walking in the front and the middle, Lao Zhao hurriedly and gently pulled Lao Zheng.

………

Today's eighth watch, the eighth watch is over, ask for a monthly pass, ask for a recommended ticket, ask for a collection and so on!!

……… (To be continued) R580