Although this press conference did not reassure many countries, and they were also very wary of the existence of Zhao Li, which is equivalent to a humanoid strategic weapon. But they also didn't have the slightest way to take Zhao Li.

Some people even started ridiculing on the Internet. "We promise not to use Zhao Li first."

This kind of ridicule Zhao Li doesn't care, anyway, as long as these technologies are used in people's livelihood in the future, these people can't find any fault, not to mention that this kind of thing pushes the Atlanteans, and the matter will be clean, and it doesn't matter what you want.

Zhao Li was still in the capital at this time, but the entire company began to mobilize.

All the production directions have begun to transform to those high-tech electronic technology, such as those mobile phone cases similar to Tianxun mobile phones and the final assembly work, basically all of which are managed by the enterprises established by Zhou Bing, it can be said that Zhao Li is a technology-based concentrated enterprise, but Zhou Bing's side is a manpower-based concentrated enterprise, and Zhao Li may have an advantage in taxation, but in terms of employment, the current Zhou Bing can be said to be unique, an industrial park of 5,000 people, plus the establishment of branch factories in three regions outside, All of a sudden, she became the leader of a manpower-intensive enterprise beyond those people.

Not to mention anything else, the scale of her three parks alone is close to 20,000 people, which already makes local governments tremble a little.

If you count other related logistics and transportation and other branches, the scale of her enterprises has begun to exceed two or three billion.

After all, all of her company's business is now related to Cybertron Technology.

Zhao Li didn't have much spare time to wait and deal with it slowly, and her rapid expansion was a reasonable thing, after all, a lot of work was just like the Great Elder's concerns about 3D printers. If it's all done mechanically, then there's no need to play in these places. An unemployment rate alone can make these people completely stupid.

But there will be an alternative soon!

Zhao Li looked at the helmet in his hand.

This is the final version of the gaming helmet and the most awesome version of that game with bioelectricity. The reason why Zhao Li didn't release it was because God knew that if he released it before, he would be taken away, but now he doesn't have this concern.

And this thing is also a super learning prop, and you can push it out however you want in the future.

"This kind of big killer is still saved for the last use!" took out the most deterrent thing he has at present, and he is relieved to carry out this project.

3D printers are bound to promote, this is a typical high-precision project, this thing has more advantages than the traditional CNC machine tools, after all, this kind of 3D printer to print a gear is equivalent to the casting and processing and other processes are all combined, there will be no problems caused by multiple processing. There will be no time wasted either. It can be said that if a gear is to be formed from beneficiation to casting to rough machining to finishing, then 3D printing is very simple, as long as the powder of beneficiation is directly printed.

Such steps can basically combine several factories into one, which is undoubtedly good to simplify the work, but it will also cause unemployment of various workers, after all, this 3D printer does not need too many people to operate, Zhao Li's software can even allow those designers to directly enter the production process with one click after designing.

Simplified industry is insanely simple.

This simple increase in efficiency makes this kind of 3D printing completely deviate from the bloat of traditional industry, and it can be said that if there is such a printer. One person can produce enough at home, provided that there are enough raw materials.

And now the only person who can produce this special printing material powder is Cybertron Technologies.

It can be said that if this kind of 3D printer is fully rolled out, Cybertron Technology can make a lot of money just by selling this raw material printing powder every year. However, judging from the official attitude, they will definitely launch this kind of printer, but they will not promote it. There's so much involved.

Sometimes the latest technology isn't necessarily the most adaptable.

After the promotion of this 3D printer was blocked, Zhao Li tried to start further looking for a breakthrough.

In fact, he has been fooling around with those officials every day for a long time these days. On Minister Wu's side, they finally understood their concerns about this kind of 3D printing.

Without him, I am afraid that there will be too many unemployed people.

"But it's a great thing for a sophisticated production facility." After looking at the production process of this 3D printer, Minister Wu quickly came to a conclusion.

After all, this legendary tool for cutting-edge production is very awesome. In their eyes, if this kind of thing is really used to produce ordinary steel plates or something, it is better not to get it.

However, the popularity of this kind of thing is indeed a trend, because the time saved by this 3D printing technology is not a star and a half, compared with the cutting-edge CNC machine tools, its advantages are more obvious, and it is more difficult to be subverted.

"Xiao Zhao, if you want to promote this, I suggest that you start with those cutting-edge processing industries, such as those aviation industries, aerospace and other factories, or equipment finishing factories, otherwise you just can't find it, after all, the production lines of ordinary industrial people are already fixed, and it is estimated that you will have to make big changes to introduce your technology. This one is not the same as your industrial helmet. ”

The assembly industry has always been a domestic shortcoming, it can be said that the previous Chinese manufacturing in other aspects is not lost to those products outside, but in this assembly link lost a mess. Therefore, after the emergence of this industrial helmet, it is understandable that Chinese companies are competing to buy, and this improvement in the assembly link has allowed the entire Chinese enterprise to enter a new era.

Made in China, MADEINCHINA is no longer synonymous with the inferior goods in the past, and the current domestic products also have assembly accuracy that is not inferior to foreign products.

This improvement in accuracy is also an improvement in the overall competitiveness of the country's industrial products, and the foreign trade quota has increased by nearly 30 percent.

Especially for African exporters, Made in China has basically become synonymous with high quality and low price.

Coupled with the friendly openness of the Middle East. The big chiefs of the entire Middle East are in control, not to mention the entry of Chinese products now. As long as they know that this is a product that Zhao Li is involved in, it is basically a green light all the way now.

On the side of the Great Chieftain, there is only one criterion. That's what Cybertron makes is good.

Basically, as long as Cybertron Technology participates in the performance of the products, they are stronger than the same type of products.

And Zhao Li's plan, many companies also agreed, their profits are very low, these companies are very low competitiveness at home and abroad, at this time, together with Cybertron Technology, after selling all their factories to Zhou Bing, it has completely become a series of assembly centers, or the production of shells.

It can be said that their product is still the original product, but how much of this product is still made by themselves. Then there was only that poor shell.

As for the rest of the stuff, it's basically Cybertron Technologies.

After the promotion of 3D printers was blocked, Zhao Li returned to the company to adjust the plan, those domestic companies that came to order these 3D printers from him, almost those high-tech departments, basically each department also ordered one or two, foreign countries are similar. The situation has not changed, after all, such an all-round breakthrough is still impossible.

And the whole Cybertron Technology gives the impression that it is still an ultra-high-tech enterprise.

"Su Yao, prepare to prepare, our company is going to release an important video. This video should be placed on the official website, and now that the Internet is fully restored, we are now using it to release our results, our lunar exploration results! ”

After Zhao Li finished speaking, he took out the results of those engineering robots that landed on the moon.

"Mr. Zhao. It won't be so fast, it's only been a few days! "In three days, these engineering robots were on the moon. And there are still results? Everyone looked at each other, as if they were in disbelief.

"Those air and space fighters are fast. It makes sense to arrive so quickly, not to mention that it is only some preliminary results. There's no problem, okay, get ready to go! "Announcing this at this time, Zhao Li also has his own plans, he no longer needs nuclear energy, and the next thing is to make these energy sources cheaper, so that his energy blocks can be used in key places instead of relying on these energy blocks in many ways now.

In fact, the development of energy is actually a sign of human progress.

From the simplest ignition with firewood to the discovery of charcoal coal, human beings have moved towards the use of chemical energy step by step, and with the gradual upgrading of this chemical energy, human beings have also begun to move towards the use of complex fuels.

Alcohol, oil, gasoline, diesel, kerosene, these energy sources that human beings began to use gradually have gradually changed the production and life of human beings, and to this day, the ultimate energy that human beings can use, nuclear energy!

The emergence of nuclear energy not only marks the emergence of mankind's most powerful weapon, but also means that mankind has finally mastered a truly inexhaustible source of energy.

Compared with traditional energy sources, nuclear energy has the advantages of small consumption and large power generation.

But so far, mankind has only been able to control nuclear fission, and there is no way to deal with nuclear fusion.

Nuclear fission can be said to be the principle of the atomic bomb. Nuclear fusion is the original principle of the hydrogen bomb.

Fusion reactions are more intense and difficult to control, let alone the use of this technology for production.

If it's not well controlled, then it's not a nuclear leak, it's a real uncontrollable reaction, and then it's the power of the sun.

Nuclear fusion also exists in nature, but the place where this nuclear fusion takes place is far away from humans, that is, the sun.

Not only does this rampant juicer squeeze out different substances, but the energy it emits is not ordinary, and if the energy of fusion is so powerful, it can be compared to the solar wind.

The solar wind is a cloud of energy ejected from the sun's giant fusion reactor, which can roast the earth and turn everything on the ground into char without the protection of the magnetic field and atmosphere.

Countries are not without research fusion, but this reaction is very difficult to control, although the output energy is huge, but the control is very difficult, countries are still researching, this kind of reactor can not be realized in solids, because human beings have not yet been able to withstand the temperature of hundreds of millions of degrees of high temperature shell.

But what others can't do doesn't mean that Zhao Li can't do it, this miniature nuclear reactor can be mass-produced with drawings, and it can also be mass-produced, if it is impossible to make a large one, after all, there is no way to stabilize this kind of nuclear reactor with strong magnetic field and laser technology.

This kind of micro reactor is different, instantaneous reaction and then transformation, and then instantaneous reaction and then transformation, with the device of the outer ring, can achieve stable energy supply.

This technology can basically be mass-produced, and if it is combined with these things, it will not be difficult to promote this kind of miniature reactor. (To be continued......)