Genius remembers in a second [Aishang Novel Network biquge.info] to provide you with wonderful novels to read.

"Xiaoyun, it's these drawings, look at it, we also brought some of the materials to you. If you don't understand anything, just ask Mr. Chen, I'll go to the people in your workshop to get the materials down first......" As soon as Deng Dongquan arrived in Yun Kai's office, he didn't stay in Yun Kai's office to say hello, and after dropping a thick stack of drawings, he walked towards the workshop outside.

There is no room for Yun Kai to refuse.

When Yun Kai saw the drawings, his head was big!

If nothing else, these drawings are all complex special-shaped parts, and the precision requirements are still very high!

"Don't frown, you kid, these jobs are all pediatrics for your processing ability, of course, except for the processing of the solenoid valve installation cylinder and sampling cylinder of the Marine Research Institute inside, which is indeed a little difficult, there is nothing else......" Chen Shengli turned out the tea Lulu made for him, and when he saw Yun Kai looking at a drawing, his brows furrowed even tighter, and he said to Yun Kai with a grin.

"Uncle, is this a little difficult for you? I'm surprised, when did you start studying the ocean again? Yun Kai asked painfully.

Hongqi Machinery Factory has always only done military products from major research institutes, this thing is so complicated, a drawing is densely packed with dimensions, and various local sections are as many as 20 places, the maximum tolerance range is O.O5mm, and the processing process has to be at least forty or fifty, Chen Shengli actually said that it is only a little difficult......

"You don't care about this, this thing is really used in the ocean. This construction period is very long, a total of 25 sets, and the delivery time is half a year......" Chen Shengli said in a good time.

"I can't do it, such a big titanium alloy, I can't do it, and here, Nima, the outer diameter is 24omm, the length is 36omm, and there are four deep holes with an eccentricity of 1o2mm on such parts, and the accuracy requirements are still at the IT6 level of O.O18mm, are you really a first-level manufacturing factory here?" The largest number of cars we have here is only 500 rotation diameter, and we can't do it......" Yun Kai didn't bother to pay attention to Chen Shengli, and directly threw this drawing aside.

Titanium alloy is inherently difficult to process, they are good parts, not only involving blind hole deep hole processing, but also far from the ordinary precision level of precision level of precision requirements, just so, the problem is not very big, but these holes and many other places that need to be processed only O.O5mm space size tolerance, Yunkai They here The accuracy level of their equipment here simply does not meet this requirement.

"Don't look at the drawings and say you can't do it, this, I have also seriously discussed it with Mr. Deng, for you, although it is also difficult, but it is not impossible to do. It just so happens that there is very little need for five-axis machining, and four-axis can be completely solved, and we believe that you have no problem doing this......" Chen Shengli is not afraid that Yunkai will not help them do it.

As soon as the senior technicians of the Hongqi Machinery Factory saw this drawing, they directly threw it aside - it was too difficult!

The people in the factory are unwilling to do it, so they can only outsource, and the whole Rongcheng can really not find a few companies that can have this technical strength.

Of course, there are several precision parts processing companies in the Strait Industrial Park, but they are all opened by foreigners, and many of the workers in it are also foreign technicians.

"Believe in a fart, I said you too, don't let us get some of those aluminum structural parts, this pile of drawings are all titanium alloys and superalloys, who can stand it?" Yun Kai grabbed his head and said bitterly.

"Oh, let's also think about it for you, you see, as far as these parts of the ocean are concerned, the blank is more than 20 kilograms, and the finished product is only one-third of the weight after processing, and the scrap alone can be sold for three or four thousand yuan, don't you like to do this kind of thing the most? There is also this, the water tank of the laser ejector, more than 20 kilograms of blanks, less than five kilograms after processing...... "Chen Shengli is a pair, we are all here according to your preferences."

This made Yun Kai speechless for an instant, he really likes to dry parts of high-value materials that can produce a lot of scrap, but that accuracy can't be so high!

For such high-precision parts, the thousands of dollars spent on crumbs are simply chicken ribs! For such a difficult part processing, if the processing cost of a piece is not tens of thousands of yuan, no one will do it at all!

"You better read the drawings carefully first, and we'll talk about it after reading it!" After Chen Shengli finished speaking, he took out his mobile phone with a screen of five o'clock from his pocket and started playing the game.

After Deng Dongquan arrived at the workshop, he directly found Yang Daiwei and asked him to find someone to bring down the material blanks parked in the car outside.

"Xiao Peng, find a car and call two people to follow Mr. Deng outside to move the materials to the warehouse. Xiang Jing, go and count the number according to this list, alas, forget it, you bring a pen and notebook, and follow me...... "Although he is extremely reluctant to do these businesses of Hongqi Machinery Factory, the boss agreed, and there is nothing he can do about it.

The boss has the final say on business matters......

"Isn't there a mistake, Mr. Deng?" When Yang Daiwei saw a micro-cargo parked outside, he was dumbfounded, and the truck was full of various materials......

How long does it take to finish the materials for this truck!

"No, isn't it all on the list!" Deng Dongquan likes to see the surprised eyes of others. "Why don't I reverse the car and retreat to the edge of your storeroom? The materials on this car are hundreds of thousands of ......."

"Don't, let's wait a minute, I'll ask our boss before I ......" Yang Daiwei felt that Yun Kai must have been cheated.

In this car, there are basically no small parts, and it takes more than 20 days to finish!

Yesterday, Yun Kai told himself, but there are only more than a dozen small missile parts, which are obviously not, most of them are relatively large titanium alloy and high-temperature alloy parts.

These two materials are easy to recognize, especially the titanium alloy of TC4, which has a mirror-like outer surface, while the nickel-based superalloy has a frosted silvery-white outer surface.

Aren't the drawings I saw at the beginning all of them aluminum alloy aerospace structural parts? Although there are a few parts of superalloy and titanium alloy, they are all small parts on some motives!

"Don't, let's go down first, your boss knows about this......" Deng Dongquan couldn't help but shake his head and smile bitterly when he saw Yang Daiwei turn around and walk towards the office.

"Brother Yun, have you taken over all the business of Hongqi Factory?" After Yang Daiwei entered, he said hello to Chen Shengli, who was playing with his mobile phone, and then asked Yun Kai angrily.

Yun Kai, who was frowning and looking at the drawings, raised his head and asked Yang Daiwei suspiciously, "What's wrong?" ”

"You better come out and take a look......" Yang Daiwei didn't say what was going on, and directly asked Yunkai to come out and see by himself.

Is there something wrong with these materials?

This is possible, after all, it is still a holiday period, and the hearts of the people who manage the warehouse in the aerospace industry are still on vacation, and they have not taken it back, and it is normal to make a mistake in the furnace batch number or material specifications.

"Dai Wei, what's wrong? Isn't it better to live as much as possible? "On the first day of work, Xiang Jing, who has just come into contact with this industry, doesn't understand what kind of anger Yang Daiwei is having, the more business you have, the more money you can earn!

"Aerospace requires the processing to be completed this month, and with so much work, even if our scale is tripled, it is impossible to complete the processing of these parts. There is another problem, most of the materials on the car are titanium alloys and nickel-based superalloys, the military materials used by Hongqi Machinery, the general price is more than 400 yuan a kilogram, all piled up in our warehouse, just throw one or two pieces, it will cost tens of thousands of yuan, so, when you manage the warehouse in the future, these materials are given to whom, you must record it, no record, it is your responsibility...... although depressed, But for this new Xiaobai girlfriend who doesn't know anything about the machining industry, Yang Daiwei still patiently explained.

"No, it's so expensive, if I lose it in the future, how can I afford it!" Xiang Jing really didn't expect that these materials would be so expensive, and couldn't help but be stunned, and suddenly thought that her job as a warehouse manager was not easy to do.

Yang Daiwei was speechless, he even had a kind of dissecting this woman to see what was in her head: "You just need to record the picking record, our workshop is monitored, and there is no need to worry about this." ”

Yun Kai originally wanted to ask about something, but when he heard Yang Daiwei's words to Xiang Jing, he couldn't help but understand what was going on.

These drawings are probably not all that Deng Dongquan brought!

What is going on with Deng Dongquan and Yang Shengli? Didn't you give them any benefit, you need to do this to yourself?

Many people can't get the outsourcing processing business of aerospace, so they just stuff these jobs into their hands on a large scale.

However, when I saw the pile of materials on the truck, even if I was mentally prepared, I was still shocked.

Could it be that those outsourcing processing plants in aerospace have collapsed? Or are the people in the production workshop of the Hongqi Machinery Factory not going to do it?

According to the complexity of the drawings I read, how can so many parts be completed in less than half a year?

"Mr. Deng, you're not kidding, are you?" Yun Fei came back to his senses for a while, and asked Deng Dongquan, who was smoking a cigarette on the side and didn't know what to think.

"Do you think we can do so many parts in one month? You're not kidding? "Nima, these two bigwigs of aerospace are playing with themselves!

"Who told you to complete it in a month, there are only a few of them, and more than a dozen of our own products need to be delivered before the end of the month, as for the rest, it is those larger titanium alloy parts, nickel-based material parts, the fastest delivery time is three months, many are half a year or even a year......"

Thank you for the awesome book and a big reward of 588 coins, and thank you for the big reward of office automation and eight-point cigarettes.