Under the suspicious gaze of these candidates, Peng Huading continued: "Although they have not yet been widely used, and even have not been made by enterprises, you think that they have a wide range of uses, great effects and uniqueness, just do it." There is no standard answer to this, it depends on your imagination and rigorous thinking. I almost forgot to tell you, if you write well, I read and approve it, I will order you to preside over the development of this project, I will find you everywhere if you want people, and I will find funds for you everywhere if you want money. Anyway, as long as it's not nonsense, there's merit in what you write. ”

Peng Huading has long wanted to make some special equipment out, but unfortunately he can't find an "excuse" for a while, he already has a repair system, which is a very cowhide equipment to store, it is likely to be difficult to keep secrets, if he makes some jaw-dropping things come out, and does not attract the relevant departments, when the time comes, whether they will be sliced and inspected or recruited into those departments, that's it.

He brought up the topic of this recruitment in the hope that these people could come up with some whimsical ideas, and he would quietly support them and give them some enlightenment and creativity, so that the new equipment created would not be eye-catching, at least not so that people's eyes would be focused on themselves. They will think that they are just a good manager, a guide, a collective creation, and a reference to the creativity of others.

Ideally, in the future, it would even be possible to cover up the restoration system that you had assembled before.

For the interview questions raised by Peng Huading, several people felt very strange, and they didn't know whether Peng Huading was true or false. However, I thought that Peng Huading gave everyone a subsidy for the first time. With so much equipment in a huge workshop but few workers and technicians, they still choose to believe.

When Peng Huading announced that he could start doing it, the six of them immediately got busy.

Without looking closely, Peng Huading knew that two of the six people had really used CNC machine tools, and one seemed to have seen it, but had not operated it. Two of them really don't know anything, so they went to the design studio to occupy a computer as soon as possible, and wrote words in painstaking thought.

Only the middle-aged man picked up the parts wrapped in oiled paper without hurrying, looked for vernier calipers and began to measure.

An hour later, two young people who had used a CNC machine began to program on the CNC machine. A young man who had never operated a CNC machine chose a piece of metal rod and put it on an ordinary lathe to prepare the part of his choice.

When Peng Huading saw him, he was about to start the ordinary lathe. He walked over, smiled and asked, "Where are your process drawings?" Show me. ”

The young man was a little timid and handed over the drawings to Peng Huading.

Because the parts are simple, the drawings are naturally not complicated, and the computer prints several processes separately on the drawings. Peng Huading looked at the drawings a little. I think this candidate is decent. The drawings are not colorful. But there are no loopholes.

Peng Huading nodded after reading it and asked, "Have you ever operated this kind of machine tool?" Do you want me to help you? ”

The applicant replied, "I used this lathe when I was an intern, and it should be fine." ”

Peng Huading smiled. gave the other person an encouraging look and left.

At this time, a candidate who was programming on a CNC machine raised his hand to Peng Huading and said, "Boss Peng, my program is ready, can you take a look?" ”

Peng Huading hurriedly walked over and looked at the program he edited, although the program was not long, it was very characteristic and concise. However, he noticed that there was a small problem in it, so he pointed out it in a friendly voice: "You haven't thought about the mending knife here, this chamfering knife will cut down, maybe you will cut off this side before it is in place." ”

The other party looked at him with admiration, and while thinking about how to modify it, he couldn't help but ask: "Boss Peng, you are very familiar with CNC machine tool programming, right?" Got the error in it so quickly? ”

Peng Huading said: "It's okay. You've got a good programming style, and I have to learn from you. ”

The candidate smiled proudly: "Yes, our teachers all said that I have a set of programming." Boss Peng, you won't brush me off, will you? ”

Peng Huading smiled and asked, "You don't have this confidence?" ”

The applicant hurriedly said: "Yes, yes, I'm afraid that you don't have the ability to recruit." ”

Peng Huading said: "Why don't you rely on your ability? Although your appearance is not outstanding, you are also worthy of the audience, right? ”

Another candidate did not dare to compliment the program, although he was very slow to write it, but it was full of errors, not only some instructions were wrong, but also the process was not arranged correctly.

Looking at him sweating profusely next to him, Peng Huading asked, "You haven't used a CNC machine alone before, have you?" ”

The candidate smiled awkwardly, wiped the sweat from his forehead, and stammered, "I...... I did an internship with a teacher...... I have practiced once, and I can't remember some instructions clearly, can I turn over the manual? ”

Peng Huading replied, "Of course." As he spoke, he said to the applicant, "You'd better transfer the process here back and forth." If you process it like this, after the hole is drilled on the spherical surface, it is likely that the spherical finish of the hole is not high, and it may even break out of this brittle material. ”

However, if I round it first and then drill the hole, it will be difficult for the drill bit to stabilize on the spherical surface, and it may float, and the coaxiality of the guide hole will not meet the requirements." ”

Peng Huading said: "You are right to think so. In this case, drilling the hole first will have a bad effect on the spherical surface, and the first hole will have a bad effect on the quality of the hole. If I asked you to resolve this contradiction now, what would you do? ”

The candidate asked, "You mean to ask me...... Asking me to find a way to solve this problem specifically? ”

Peng Huading nodded and gave an affirmative answer: "Yes, I will test you now, how to solve this problem." ”

The applicant thought for a moment and said, "If this is the case, I will add an additional process of spherical flat grinding, and after the spherical surface is rounded, I will grind a small platform in the place where I want to drill the hollow." ”

Peng Huading smiled and asked, "Then why don't you do this?" Adding a process doesn't add much trouble, so why not add it? ”

The candidate was embarrassed and said, "But I don't know how the grinding wheel is fed, and I don't know how many revolutions the grinding wheel takes." ......, I never used this process during my internship. I think...... I think this is just a job application, you definitely won't be so strict, and it shouldn't matter if there is a little problem with a number of jù. ”

Peng Huading smiled and said, "Yes." You mean that when you officially go to work, you will study this content and make up for this defect, don't you? ”

The candidate blushed and nodded.

Peng Huading said: "What you said is right, just do it." ”

The applicant asked in a low voice, "Boss Peng, you're not angry, are you?" You won't hire me just because I don't know this, right? ”

Peng Huading said: "No. As long as you have an idea, it's fine. If you just forced yourself to do it knowing you didn't understand, and ended up being unable to do most of the work because of a small problem, then I probably don't want you. You know to play to your strengths and avoid your weaknesses, that's good. ”

The applicant climbed up along the pole and asked with a smile, "Boss Peng, can you teach me how to do it?" Also, can you help me change the program? I...... I know there are a lot of mistakes in it, and when I start working, I will definitely learn from you and my colleagues to ensure that I don't make these mistakes again. ”

Peng Huading said: "You know yourself very well. ......, okay, as long as you really promise to study hard in the future. ”

Then, he stood next to the candidate and told him to correct the wrong instructions and adjust the process. However, he didn't tell him about any skills, nor did he tell him about some good programming style, but just like a teacher teaching, he told him some standard and simple knowledge.

Because he knew that the candidate in front of him was more than lively and not rigorous, and if he told him about any skills and styles before he was proficient, he would be guided to float on the surface, and it would be even more difficult to sink in the future.

Yes, Peng Huading wants to keep all the applicants in front of him. These people, except for the middle-aged man, are very malleable, and it can be seen from their appearance that they are all eager for the job and have a strong sense of self-motivation.

Peng Huading himself only graduated this year, and he knows the difficulty of finding a job, and he doesn't want to see the pain he has in them be reflected.

Of course, Peng Huading is not a good person, and it is impossible to accept people who are of no use to his company, but thinks that these people have the possibility of improvement. Besides, his company is now short of people, and there is a shortage of people in any aspect, not only senior technicians, but also workers who are willing to work hard......

After instructing these people and confirming that there was nothing wrong with them, he walked out of the workshop and into the design room. Standing behind the middle-aged man first, he watched him draw a diagram for a while, and assisted the other party in measuring a few numbers with a measuring tool.

Seeing the familiar appearance of the other party, he sat down next to him and asked, "Master's surname?" ”

The middle-aged man replied with a smile: "Boss Peng, my name is Dong Pingnan." You've just graduated from college, right? ”

Peng Huading said: "Just like them, I graduated this year. However, I had a good opportunity and found a few like-minded people to start the company together. Now we are short of people here, welcome you to join our company. ”

The middle-aged man smiled: "Boss Peng, you are too polite, thank you for taking me in." ......, your skill in measuring just now is no worse than that of me, an old technician, if it weren't for the fact that you look young and smaller than the average college student, I really don't believe that you are a student who has just graduated from college, and I think you are an old expert. No wonder you are young, and your family can rest assured that this company will be handed over to you to take care of. (To be continued......)

Tips: The new domain name "biquge.info" has been launched by Biquge, and the original domain name is about to be discontinued. Please tell each other, thank you!