Chapter 1609 Yueman Qingyou
After getting the stabilized molar blank, Han Peacock first discharges according to the required design size, which part to leave can only be determined according to personal preference, the direction of the pattern, the size area of the pattern and the color, etc., the shape is drawn on the molar, and then the excess part is cut off with a small cutting piece. Pen, fun, and www.biquge.info
After the rough cut shape, the precise datum grinding, at this time, you can use a belt grinding machine, sandpaper or emery grinding disc, diamond file, arc can use emery grinding head or ordinary grinding head.
The minimum mesh of the abrasive belt used in the belt grinding machine should be greater than 80 mesh, and the small mesh will be dragged out of the hard and soft structure of the molar fossil because of the large sand particles, so that there are many sand holes on the surface of the molar.
After the datum is grinded, if it is fixed with a gong nail, it is necessary to drill, the molars are drilled, the molars are drilled first, the positioning points of the holes are drawn, and the holes are drilled with pcb tungsten carbide drill bits, and the diameter of the drill bits is selected below Φ1.5, and the steel plate is cushioned under the molars to prevent the rear mouth from being blown up when the punching is about to penetrate.
Because the molars are soft and hard structures, it is difficult to ensure the accuracy of the holes, so you can use the emery grinding needle to reaming and correcting!
Directly use the emery grinding needle to punch holes, the speed is slower, try to choose a grinding needle with a large diameter (good rigidity), the pressure is uniform and small, not in a hurry!
The counterbore can be ground directly with a spherical grinding head, which is easier to master.
In this process, you must remember that you can't use a coarse drill bit to punch holes, so that the cutting surface of the drill bit is large, and the petrified hard particles of the molars will be pulled out hard, and they will be broken in serious cases!
When sanding with a belt grinder or sandpaper, try to polish along the direction of the grain, just like woodworking planing, which is very difficult and not smooth when planing against the grain......
The rough molars are tightened on the knife brace after the hole is drilled, and the shape is quickly ground with a belt grinder, but it is necessary to grind from both ends to the middle, so as to prevent the occurrence of rotten edges and missing corners when grinding to the edge in one direction.
Polishing the shape by hand with sandpaper or a vajra file is just a little less efficient and longer.
The small chamfering belt grinder is almost the same as the sandpaper, and the flat grinding grinds the thickness to the right size, and the belt grinder is much faster!
After the shape of the molars is polished, the concave arc is trimmed with a small grinding head, and the rough grinding has been completed!
The next step is to work finely, with 80 mesh grinding disc or sandpaper polishing, fine trimming of the shape, gradually increase the number of mesh for fine grinding, until 800 mesh, remove the molars, and coat the entire molars with ordinary epoxy resin.
Towards the end of the molars, a resin coating is carried out in order to fill in the sand holes left during processing or from stabilization! Like a carpenter's scraping putty, it's almost done.
First heat the molars to about 50-60 degrees with a hot air dryer or oven, evenly coat the whole molars while the resin is hot, and polish off the thin layer of resin with sandpaper after 24 hours of curing, and the mesh will be 1000 until you want to be perfect.
During this period, there are many precautions, such as the stabilized molars are not afraid of water, but the size should be slightly larger after soaking in water, because the volume of bone and semi-petrified parts increases after water absorption!
The whole process of fine processing is preferably carried out in a dry state, which can reduce distortion and stabilize the dimensions.
If the molars are accidentally deformed, they can be heated to 70-80 degrees and then pressed with a flat object, and they can be straightened when they return to normal temperature, because the resin is malleable at high temperatures.
Because it was the first time to cut ivory, the texture of the ivory selected by Han Peacock was not the best, and most of the production was made of knife handle materials.
Of course, the ivory comb Han Peacock has not forgotten, but the production of the ivory comb is not difficult, besides, it is enough to have a dozen or so, but it is a knife handle material, which requires more, after all, many of his subordinates like to use knives, especially the Miao guards under him, almost every person has a knife.
And Han Peacock himself likes to use knives, so he plans to make a few ivory knife handles by himself and place them on the knife.
The knife handle material is simple to make, in fact, it is only used by Han Peacock to practice his hands, and the ice tooth is really used for carving, and the knife handle material is the most suitable for practice.
However, it is necessary to practice step by step, so Han Peacock has been processing soil teeth recently, don't think that there are no soil teeth in the Arctic Circle, because in the past century, the temperature of the Arctic Circle has been rising, so the permafrost layer in some places has also begun to merge.
Some of the shallow buried mammoths melted out of the permafrost, forming the worst quality soil teeth, and the soil teeth were more widely distributed!
For several days, Han Peacock was out looking for mammoth fossils buried in the soil during the day, and practiced in the chaotic space at night, while his subordinates took advantage of the cold night to work outside.
Of course, part of the reason why they dig at night is to avoid human prying eyes, after all, Han Peacock's actions are illegal, whether in the United States or in Canada.
In order to avoid trouble, these days are spent wandering around during the day, looking for mammoth fossils and sitting down to mark, and at night, excavators are turned on and digging around.
After digging more times, Han Peacock has no shortage of materials for practice, especially the soil teeth, most of the heartwood of the soil teeth have been weathered, forming a "powder heart", which can only be used
The outer skin is called "tooth skin".
There are many cracks in the soil teeth, and different geographical environments give it colorful colors! It's so ever-changing, and the camouflage is seductive!
In fact, the soil tooth is more plastic, but it is a matter of color, the inside is still white, but each one will have a different degree of discoloration, such a knife handle is very popular.
So recently, Han Peacock has added a few ivory carving apprentices, they have men and women, some make ivory combs, and some make knife handles, which can be said to be very lively.
Of course, Han Peacock is the most professional in this, he got a piece of ivory, he has rich experience and good eyesight, and he basically doesn't need to remove the skin, so he can roughly know what the lines are, and the cracks are not deep.
Generally, the cracks are shallow, there is no hidden danger of delamination, can be directly used to make the handle, the cracks are deep and habitually worn, there are layered ones to be treated, and the cracks are deep, and those with delamination tendencies should also be treated before they can be used.
Pick out a good tooth skin, directly do the handle is not much of a problem, but as time goes by, there will definitely be a shrinkage, and then there is the problem of cracks, the teeth begin to petrify in the soil, cracks are the beginning of petrification, generally form a white powder such as "calcium carbonate", so the cracks are mostly gray-white, this place is a good place to hide water, need to be treated!
The deep petrification of the crack is heavy, and it will fall off the end in the future, and at the same time it will cause the crack to expand, and the gray-white layered line can be seen in the cross section.
If you use an oily substance to make the handle of a tooth that has not been treated with heavy petrified teeth, the result will be faster delamination.
Everyone knows that freshly cut wood has to be dried in the shade for many years before it can be used, and the same is true for tooth skin!
The newly dug tooth skin leaves the original environment and is completely exposed to the air, and its internal structure is to be mutated, including physical and chemical, so it will show such as deformation, bending, delamination, etc., so it is better to do a simple stabilization treatment, even if it is only the surface layer.
The tooth skin is familiar with the knife handle, after the tooth skin is stabilized, it is more ideal to use it again, but there is a problem here, before the treatment, the light-colored cracks are very commensurate with the background color, once the stabilization is done, the cracks and all the fine cracks have become dark brown, which has changed the original color matching, which should be foreseen, and the place where there is a layer will also become dark.
Many foreign knives have been stabilized, and you can identify it by looking at the picture, but it is as difficult as wood to stabilize the skin, if the requirements are not high, it is another matter, after all, the density of the tooth skin itself is high, and it is no problem to do simple processing and practicality.
With Han Peacock, it didn't take long for everyone in his escort team to replace the knife handle with ivory, and Han Peacock had already shifted the target at this time.
After all, the knife handle is too much, and it will be bored, so today Han Peacock plans to deal with the ice teeth, "ice teeth" generally refers to the mammoth teeth dug out of the frozen soil, the texture is the same as the modern elephant teeth, mostly used as carving raw materials, and the handle is also first-class, but ordinary people will not be so wasteful.
Most of the ice teeth are not petrified, so there are few surface cracks, and the color is mostly milky white, and the ice teeth that have just been dug out cannot be directly used, and it is often necessary to make the handle after several years of drying, otherwise the shrinkage is relatively large.
In addition, there is no texture on the surface, and the price is extremely high, so the ice teeth applied to knives are not too popular.
Of course, Han Peacock didn't plan to continue making knife handles, so he planned to carve some fine products with ice teeth.
And exquisite, concise ivory products, in the long history, is not uncommon, and in modern times, ivory products have become ingenious, the representative of which is the ghost ball.
Ivory is one of the well-known contraband items in the cultural entertainment circle, but ivory carving has an extremely long history, which began in the Neolithic Age, as early as the Paleolithic Age, the cave people living in Zhoukoudian used ivory carving as decoration and burial.
The glorious history of ivory has been recorded in the "Historical Records of the Weizi Family": "The beginning of the elephant hairpin." ”
The emperors of Liao, Jin, Yuan, Ming and Qing dynasties all took ivory as a royal offering, and the orchard factory of the Ming Dynasty and the office of the Qing Dynasty all had workshops for the palace to make ivory products, the most representative of which was the famous ivory "Yueman Qingyou".
This time, Han Peacock plans to carve "Yueman Qingyou", Han Peacock has always wanted to collect the Yueman Qingyou atlas, but he has never found it, so this time he plans to challenge himself to see if he can carve such a set of twelve Yueman Qingyou pictures. (To be continued.) )