"Jiuyi Heavy Industry's large-scale acquisition of China's bankrupt state-owned machinery factories should have only one purpose -- to expand their production capacity!" Peng Zhi said in surprise.

Not only him, but all competitors are analyzing the big moves of Jiuyi Heavy Industry some time ago.

Almost all of the enterprises acquired by Jiuyi Group are machinery-related enterprises - foundries, forging machine tool factories, heat treatment factories, and the largest number of mechanical processing plants! Just the foundry, Jiuyi Heavy Industry acquired the Jinling Foundry and the Northeast Shanyuan Foundry, which had long been abandoned.

Most of the large castings of Jiuyi Heavy Industry are provided by Tongguò Haer Heavy Industry and Capital Second Machine. Now the scale of production in which they have acquired these two foundries is not small.

And I have not heard that I Jiuyi Heavy Industry will terminate the casting and rough processing contract with Haar Heavy Industry and Capital Second Machine. This shows that the production scale of Jiuyi Heavy Industry will be at least doubled.

As a result, the production scale of their machining center will reach a terrifying scale of 16,000 units a year! And the two-axis simple CNC lathe (mainly the economic CNC lathe with low machining accuracy) will also exceed 30,000 units!

This is the conclusion reached by Peng Zhi's analysis. 、

He didn't believe that the young boss of Jiuyi Heavy Industry would be idle and have nothing to do to buy these factories to play. This is obviously an acquisition with the support of the mainland government, otherwise, Jiuyi Group would not have been able to come up with such a large amount of acquisition funds.

At the beginning, several other federations were established, but his Wanyou refused to participate, after all, they could not dominate when they entered it, but they would be used as cannon fodder by the Japanese.

"The current situation, I have reported to the company's headquarters. Regardless of the reaction of those companies in the United States and Europe, I believe that our domestic counterparts will make a big move. It is necessary to curb this momentum of development of the Jiuyi Group......," said Saburo Onomura through gritted teeth.

"Ohno-kun, I wonder what specific actions you will make? Are you inviting us here today just to show your determination? Li Mingshan was not polite to Ohno.

The technology of slow wire walking, South Korea has not yet matured the technology. Samsung Group's start in this regard is similar to that of Jiuyi Heavy Industry, but Jiuyi Heavy Industry has gone ahead of Samsung.

"I don't know what the reaction of the domestic industry associations will make, but at present, we have to react! For us at Mitsubishi, it didn't have much of an impact on the four-axis machining center. We only export a small amount, and now we are fully committed to developing the five-axis machining center market in China......" Saburo Onomura looked at everyone with a nonchalant look.

"Ohno-kun, please don't go. Your Mitsubishi export machining center to China, three-axis machining center is your main business! Song Hui frowned.

What do the Japanese want to do?

Did he instigate himself and others to lower the price? Not long ago, in order to cope with the price reduction of 91 Heavy Industry. They have all been forced to make a very large price reduction, if it is reduced again. How much does it have to be lowered?

"We export three-axis machining centers to China. The machining accuracy is much higher than that of Jiuyi Heavy Industry, why should they compete with us? "Saburo Onomura doesn't have a lot of price fluctuations in the Chinese business.

If possible, he will definitely reduce the price significantly, and even let them reduce the price of the same type of products as Mitsubishi and Jiuyi Heavy Industry to the same grade.

Only by curbing the development trend of Jiuyi Heavy Industry in the market can they stop their investment in technology development.

"I will apply to the company. We will sell the production technology of the 4-axis machining center to you, and at the same time, we will also build a proposal to the board of directors of the company and a proposal to the Wasena Association. Let them loosen the restrictions on the Chinese market for low-precision five-axis machining centers...... "This is no longer the way to go."

Saburo Onomura has reason to believe that in recent days, those international giants will definitely have a countermeasure.

It is impossible for them to let Jiuyi Heavy Industry develop without restrictions.

At present, to limit the technological development of Jiuyi Heavy Industry, the only way to make a fuss about the root economy is to make a fuss. At present, the boss of Jiuyi Heavy Industry is investing everywhere, and the bank loans exceed 2 billion yuan, a large part of which is collateralized by Jiuyi Heavy Work.

Once the market of Jiuyi Heavy Industry is eroded, the technology investment can not keep up, the market will further shrink, if the other investments of Jiuyi Heavy Industry can not be recovered in a short period of time, the capital chain of Jiuyi Heavy Industry is broken except for the acquisition of China's state-owned companies, there is no way to go!

"Mr. Ohno, I wonder if it is possible for us to get the production technology of the five-axis machining center?" Song Hui asked the voices of everyone present.

With the five-axis production technology, the four-axis technology is also available.

The market for four-axis machining centers is far less extensive than that for five-axis machining centers. Everyone present understands.

It is impossible to acquire the production technology of heavy-duty five-axis machining centers capable of processing the propellers of large warships, but it is not willing to give up the production technology of small woodworking machines.

With these technologies, it is not only able to produce five-axis machining centers, but also many of the technologies on it, as long as they are thoroughly understood, for the company's machining technology level, mechanical design and many other mechanical technologies that can be generalized are a huge improvement.

"This is unlikely, but you can learn from Mr. Peng, aren't they currently negotiating with Italy? All of Europe, not only in Italy, but also in Spain, Portugal, the Netherlands and many other countries, where companies with the production capacity of 5-axis machining centers are in a slump......" Saburo Onomura said to the crowd.

What he meant was to tell everyone that it was impossible for Mitsubishi to sell the production technology of a five-axis machining center.

In the same way, his words also left a lot of hope for everyone, if you want to get this technology, many factories in Europe that are not doing well are good choices.

"Then forget it, we still only do three-axis machining centers and two-axis CNC lathes!" If you don't have a huge technical strength, even if you get the production technology, you can't form a production capacity in a short time.

Moreover, those companies that can be acquired, the technology is not very good, these companies without that technology, it is difficult to digest the technology after getting it, let alone improve the accuracy level in the technology.

This requires a lot of money to back it up.

The meeting lasted until the early hours of the morning, and at the end what kind of agreement was reached, few people except the parties knew about it.

And Jiang Jianxing and the others, although they went to bed late the night before, they still got up very early the next day.

Today will be the day when they start harvesting.

Over the years, a lot of manpower and material resources have been invested in these equipment, just for today's harvest.

Moreover, what is pleasing is that the heavy-duty CNC equipment developed by Jiuyi Heavy Industry does not even have a competitor in the market.

"Mr. Jiang, if those foreign guys want to purchase our heavy equipment today, let's ......" Wu Zhongda is most worried about this.

Whether the state will ban the export of some sensitive equipment has not been clearly documented and regulated. And these equipment are not critical military equipment.

At most, it can only be regarded as the key equipment for the processing of key military equipment! These equipment, military and civilian, are not easy to define.

"Don't worry about this, I called Yun Fei last night, and he will deal with these problems himself. I don't think it's very likely that the state will restrict our exports in this regard! Jiang Jianxing's words made Wu Zhongda feel a lot more at ease.

Wu Zhongda's biggest concern now is that the state will restrict their exports in this area.

Yunfei continues to expand the production scale of the entire Jiuyi Heavy Industry, which makes the sales pressure very great.

Of course, the benefits can also be seen after these capacity expansions. If it is produced at full capacity, the output value of Jiuyi Group's CNC equipment will exceed 10 billion!

Last year, the output value of the entire Jiuyi Heavy Industry was only 2.8 billion, and this year, it is estimated that it will exceed 3.5 billion! Jiuyi Heavy Industry's equipment has a market share of more than 30% in the entire Chinese market. And heavy CNC equipment, almost 100% of the market share.

Of course, this 100% market share is not much.

Before the expansion of production scale, the biggest problem of Jiuyi Heavy Industry was the lack of production capacity, but after the expansion of production scale, it faced the problem of sales channels.

The competition in the Chinese market is becoming more and more fierce.

If Jiuyi Heavy Industry wants to achieve greater development, in addition to continuously opening up the Chinese market, it is only to go out.

The international situation in North Korea, Iraq, Iran, and Pakistan is not optimistic, and in order to protect themselves, they can only continue to develop their military industries.

For them, after having the manufacturing technology, it is far less cost-effective to buy some more advanced weapons than to produce them themselves.

Moreover, in the past few years, they have also obtained a lot of conventional military technology in China.

In Iraq in particular, Yun Fei told the officials who came to visit Jiuyi Heavy Industry that the United States would take action against Iraq in the next few years, first of all, as in the Gulf War of that year, directly using aerial bombardment, and then advancing ground troops.

Since the Iran-Iraq war, Iraq and Iran have not been in a very good situation, and they have both been subject to economic sanctions by the United Nations, led by the United States.

It just so happens that the international community is preparing to implement the oil-for-food program for Iraq, which has made Iraq's purchase of Chinese CNC equipment come true.

If the Chinese government prohibits the export of these heavy equipment from Jiuyi Heavy Industry, Jiuyi Heavy Industry's international market development will be greatly hindered. (To be continued......)