1134 Bold Young Researchers (2nd Update)

"Nothing has changed much on the inside, but there is a lot more protection on the outside. Moreover, most of them use central computers to monitor the surrounding environment, as long as someone does not enter and exit from this only passage, touching the railing will trigger a vibration alarm, and the security personnel at the door will appear at the place where the alarm is called soon......" Deng Lanqing explained in detail to the old man and his party.

Yun Fei told her very clearly, as long as they made something out of their own and introduced it vigorously, the people who followed behind would definitely bring them a large order.

There are many high-tech research institutes in the country, and the secrecy in them is very high. However, most of those protections are performed manually. The last time the old man came here, there were some people who wanted to purchase their dual security system of fingerprint authentication and magnetic card verification, but Yun Fei refused at that time because the technology was not yet mature.

At present, if there are large-scale orders for these monitoring systems, this can bring a great opportunity for the development of Jiuxin Times.

These security systems are also designed for certain functions of high-end CNC machine tools. Or, it would be more appropriate to say that it is for the sake of the extended research of the project of the machine.

Originally, the security personnel at the gate of the building can no longer see the shadow, this is the research institute, and there is no staff such as the front desk reception at the door, even if the old man came here to visit, he did not arrange people to welcome, only the banner above the gate, but many people were surprised.

As soon as they saw this, everyone's faces became extremely unsightly.

It does not say that the old man is warmly welcome to guide the work, but that it is written that I would rather be tired to death than let my peers starve to death!

At this time, everyone realized that it seemed that after entering this huge factory, such words could be seen everywhere.

The gate was not closed during the day, and the car carried everyone and climbed up the slope next to it. Without slowing down or pausing, he walked straight towards the building.

The building of the Jiuyi Research Institute was originally an old building, and there was basically no way to renovate it too much. The huge area on the ground floor, and a large area near the gate are offices, which are the territory of the CNC Machine Tool Research Institute. Inside is used for designing, researching CNC machine tools, and a large part of the upstairs area is also their office.

"Since the previous year, all the production plants of the group company have been stripped of the scientific research part, and they are only responsible for production. Technical research and technical support are all provided by the Jiuyi Research Institute. After two years of trial, this model is not only more efficient, but also saves a lot of money. Yun Fei saw the old man staring at him with a puzzled face, and explained with a smile.

He was worried that the company would be robbed and he made a protective measure.

"That's right, this way. Many scientific research institutes in the country are only responsible for research, and the technology is sold to relevant factories to be responsible for transformation. Seeing this, the old man nodded approvingly.

"Old man, do you want to go to the office inside?" There are not many people in the office, because these designers in the entire Jiuyi Research Institute must know the most basic mechanical manufacturing process. Only in this way can something be designed that minimizes the cost of the production process. And this is different from the design process, as long as it is reviewed by the old men of the Guò project review team, and then it is all designed and produced while modifying.

It's a huge waste of money. But it saves a lot of time.

And time is what Jiuyi Research Institute lacks in enterprises that have not been in the CNC machine tool industry for a long time.

How many of the powerful CNC machine tool companies abroad do not have decades of experience? Even those factories in Taiwan are almost 20 years old. What's more, people have access to Japanese and American technology. The industrial base is also far better than that of the mainland.

China's industrial foundation is not good. And it is also difficult to obtain technology from abroad, and the only way is to use money to smash it.

"What about Sun Lin and Situ Heyun?" The old man didn't say if he would go into the office to have a look. directly asked Yun Fei about the whereabouts of Sun Lin and Situ Heyun.

"Mr. Situ is still in the northeast, and the turning and milling machining center we have for the Three Gorges Project has been carrying out the final assembly during this time, and his old man is staring at it over there. Mr. Sun has been in the workshop over there during this time, staring at the improvement of our five-axis linkage machining center. Deng Lanqing knew that Yun Fei didn't know much about the situation here, so he stopped the car, turned his head and explained with a smile to the old man behind him.

The old man looked into the office area next to him and found that there were not many people at all, so he shook his head and motioned to continue walking.

The building of the Jiuyi Research Institute may have been designed to expand from the beginning, so the length of the entire building is more than 600 meters, and the width is also more than 300 meters, and the area of each floor is more than 20,000 square meters.

The area at the gate was originally used for the research of CNC lathes, and now a large area has become an office area, and the old man's original memories have all changed.

"This area is still the research of CNC lathes and electrical processing machine tools, and the current research of our electrical processing equipment is mainly for the research of high-precision and high-efficiency slow wire cutting and economical medium wire cutting. For simple machine tools such as spark machines, we have transferred all the technology to Capital No. 2 Machine. The technology of the economical fast-walking wire cutting machine tool was transferred to the North Heavy Industry, and the economic CNC machine tool was transferred to the Hal Heavy Industry and the Northeast One Machine, at the same time, the North Heavy Industry also obtained a part of the ......" The car slowly went to the front, and after seeing that the people who visited the visit were old men, almost all of them stopped their work and slapped their hands excitedly.

The people further afield didn't know what was going on here, and they didn't give up their work to take a look.

After all, there are often some research groups that make some noise after they have succeeded.

Deng Lanqing saw these researchers rushing towards this side, and knew that it would not be easy to imagine that it was not easy to drive the car to the front, so he simply stopped the car. Yun Fei also got out of the car, and while supporting the old man one by one, he introduced the situation to him.

"That's good, now I know how to share the technology in my hands." The old man nodded approvingly.

"Grandpa Deng, can you take a group photo?" Everyone was very excited to see this old man, and the old man shook hands with them one by one, and the flashing lights kept cooling, but no one dared to make such a non-trivial request.

A girl who was not tall, looked very ordinary, and wore a ponytail suddenly asked the old man.

As soon as he saw this scene, Yun Fei immediately smiled bitterly, these young people in the research institute are all bold and bold masters, if this thing sets a precedent, it is estimated that there will be no way to enter the research area of the processing center and the flexible workshop project behind it in the morning.

When Aunt Deng saw this scene, she immediately stared at Yun Fei with a dissatisfied face.

In her opinion, this should be arranged by Yun Fei. But Yun Fei had no way to explain this matter at this time.

"Gotta get it!" The old man is easy-going, and he doesn't think there is anything excessive about this request.

With the permission of the old man, the girl immediately jumped out of the side with joy, took out a digital camera and handed it to Yun Fei, and said with a smile: "Boss, please help take a ......"

This smile made Yun Fei's teeth sour.

Even if you have qi in your heart, there is no way to have a seizure at this time. I secretly made up my mind in my heart that I must drive this girl out, and I actually dared to command the boss, what kind of system is this? What's more, who is this girl? If you are treated as a bad person by the old man's bodyguards, who can afford this consequence?

"Do you want it, Yun Fei, can you give me a picture of this little girl......" The old man turned his head and saw that Yun Fei did not move, and said to Yun Fei in his Sichuan dialect that the whole world had heard.

Yun Fei was helpless, so he could only do it.

After the filming was over, seeing more young people ready to move, Aunt Deng's face on the side became even more ugly, and before Yun Fei could attack, Deng Lanqing stopped everyone: "Go back to your posts!" ”

In a very bland sentence, those researchers honestly did not make such a non-point request.

"These researchers are too young and ignorant......" Seeing Aunt Deng staring at her with murderous eyes, Yun Fei said embarrassedly.

"It's good to be lively. Engaging in research is a very boring job, and only with such energetic young people can we get more scientific research results in our country. In order to be able to change from a manufacturing country to a manufacturing power! At this point, the Jiuyi Research Institute insists on getting it! "The old man appreciates the activity in it.

After all, when I first came, when those people didn't see that it was the old man, everyone was working diligently.

"These guys are too indulgent...... Yun Fei said embarrassedly.

"Let's walk slowly, we don't have to take this car." Seeing that Yun Fei was about to invite him to the car, the old man waved his hand.

The car was good, but there was no way to walk up to the staff and see what they were working on.

This is not like the outside production workshop, each equipment is very far apart, after all, this is a research purpose, many of them are some semi-finished products, which need to be constantly tested and then improved. Even there is no one on the side of many equipment, the machine tool runs automatically there, and after a while, some test workshop staff take a notebook to record some parameters.

The researchers of the Jiuyi Research Institute are very easy to distinguish from the staff of the test workshop, the researchers are all white coats, and the staff are light blue overalls.

This point, the last time I came to Jiuyi Group, the old man had already figured it out. (To be continued......)