On the edge of the West Lake, outside the building.

"The wind and moon on the first floor should be drunk, and the ten miles of lakes and mountains are drunk" This couplet says that this is known as "dining with delicacies and beautiful scenery" at home and abroad, and it is said that it has a history of 150 years.

It's a pity that the Leifeng Pagoda of that year fell.

"Brother Chengfeng, are you late......" On the third floor of the building, where the minimum consumption is tens of thousands, a balding middle-aged man stood outside the private room and looked towards the staircase from time to time, and when he saw a short and fat man with a young and beautiful woman who was a head taller than him on his arm appeared at the staircase, he hurriedly greeted him.

"Brother Ziqing, it's not that I'm late, but that you came too early, by the way, Mr. Peng has arrived?" The man who was called Brother Chengfeng smiled and said indifferently.

"It's been here a long time ago, others are not like you, and even the famous dishes that have been inherited for hundreds of years in the Louwailou, which are famous at home and abroad, can't attract you......" Wang Ziqing pursed his lips, but still glanced at the woman beside Wu Chengfeng a few times.

This woman is simply superb.

The woman holding Wu Chengfeng's arm, when Wang Ziqing glanced at her chest, not only did not twist, but deliberately shrugged her chest, and by the way, she also gave Wang Ziqing, who was reluctant to look away from her side, a wink.

"Mr. Peng, I'm sorry, I've been waiting for you for a long time. The scenery of this West Lake is really good......" As soon as Wu Chengfeng entered the door, he saw Peng Zhi, who was staring at the night view of West Lake outside the window, holding a cup of tea in his hand, turned his head and smiled at him, his old face couldn't help but blush.

"The scenery of West Lake is good, but it is far less attractive than the beauties around you, right?" Peng Zhi, who was in his sixties, just stared at the beauty beside Wu Chengfeng who was the best in appearance and figure, then turned his gaze to the window again, took a sip of the tea in the glass in his hand, and said to the window.

"Mr. Wang, have all your guests arrived?" The white-skinned and beautiful waiter in a cheongsam saw the time, and the time booked by the guest was more than ten minutes late. I couldn't help but eagerly stepped forward and asked.

With the influx of countless foreign-funded enterprises throughout the Yangtze River Delta and the rise of local tyrants, the business of Louwailou is becoming more and more popular, especially the third floor with a minimum consumption of not less than 10,000 yuan, there are only four private rooms in total, and if you don't book in advance, there is no place at all.

Even if you make a reservation, there is usually a specific time for each table, because there will be a lot of people waiting behind them who do not have a reserved seat.

That's all money!

"Let's serve!" Wang Ziqing nodded at the waiter.

"Come on, little Joe. Let me introduce to you, this is our big brother in Taiwan's CNC machine tool industry, the president of Wanyou CNC Group, Peng Zhi, Mr. Peng; This is Wang Ziqing, Chairman Wang, who has just been separated from Taichung Precision Machinery and invested in the mainland to establish Taiyu CNC Machine Tool Company. Mr. Peng, this is the newly hired assistant to the president of our Dingsheng CNC mainland headquarters. Qiao Dantong, a native of Xiangjiang, ...... "Wu Chengfeng first introduced Peng Zhi of Wanyou CNC and Wang Ziqing of Taiyu to Qiao Dantong next to him, and then introduced Qiao Dantong to two old goods.

Three Taiwan-funded enterprises that built factories in the mainland almost at the same time, the Dingsheng CNC controlled by Wu Chengfeng was the most powerful, but Wanyou CNC suddenly received capital injection from Japan. And Taiyu, who is the worst, also received a mysterious injection of capital at the same time, making his victory the worst.

It is said that Taiwan's remaining CNC machine tool factories are also seeking to build factories in the mainland, but they have not yet been approved by the board of directors.

"Mr. Peng. This is the most famous dishes in the outer building, West Lake vinegar fish, called Hua Tongzi chicken, Dongpo meat, West Lake Ulva soup ......" dishes have just been on the table. Peng Zhi didn't eat much, so he put down his chopsticks.

This made Wang Ziqing, the host of today's treat, very stunned.

Peng Zhi, this old thing, isn't it the best food?

Even these dishes that are so famous have no appetite!

"Do you still have the heart to eat? Now our three factories have not yet begun to put into production, and the few machine tools in their hands have all been thrown into the Chinese market. Peng Zhi didn't have any appetite at all in the face of a table full of sumptuous dishes.

The factory invested by Wanyou in China has only just begun construction, and if it wants to have independent production capacity, it will have to wait until at least next year, especially when the investment agreement with the West Lake municipal government was negotiated, and the other party asked them to recruit 80% of workers in Chinese mainland!

"Mr. Peng, I'm sorry, it's all my fault, as soon as I heard that the order of Jiuyi Heavy Industry was scheduled for three years, I ......" Wang Ziqing is also because of his own mistakes that he invited the bosses of the two competitors to dinner today.

Although it is a competitive relationship, it is also a friend for many years, isn't it?

Taiwan is not big, but there are many enterprises that produce CNC machine tools. The narrow Taiwan market makes many CNC machine tool manufacturers simply unable to eat.

Therefore, even if it is a competitive relationship, in order to survive and earn more profits, these enterprises have a lot of cooperation while competing.

If it were not for this, Taiwan's CNC machine tool factories would not be able to resist the pressure of CNC machine tool manufacturers in Europe, America and Japan.

All Taiwanese CNC machine tool factories know that Chinese mainland cannot produce CNC machine tools by itself, and the rapid development of the economy stimulates the machinery manufacturing industry, more and more production tasks, but there are not enough skilled workers. In addition, with the rapid development of the mainland's manufacturing industry and the development of some other science and technology, the requirements for machinery manufacturing technology are getting higher and higher, and the mainland needs a large number of CNC machine tool markets.

Whether it is Europe or the Americas, there are strong CNC machine tool manufacturers, and in Asia, there is also the pressure of Japan, a country with developed technology. Taiwan CNC machine tool factory from the establishment of the eighties, in Europe and the United States and Japan CNC machine tool production pressure to seek development, through more than 10 years of development, finally from the Japanese master to seek the production of mid-range CNC machine tools, counting on the use of strait relations to seek greater development, but found that the mainland actually has CNC systems and CNC machine tool manufacturers.

And the precision of the CNC system and CNC machine tools is not worse than theirs, so they have to invest in the construction of assembly plants in the mainland when they are not fully prepared.

Handed down from the same ancestor, they deeply understand that there is no country in this world that has such a strong territorial protection as the mainland.

Although the mainland is official or non-governmental. It has always been emphasized that Taiwan is the territory of the mainland and an inalienable part. However, the different political systems and different camps have made the mainland's wariness against Taiwan quite serious.

Don't look at the largest source of CNC machine tools in the mainland, all of them are CNC machine tool factories in Taiwan, that is because they do not have the ability to produce CNC machine tools in China.

Once the mainland has its own CNC machine tool production capacity, they will definitely vigorously support this industry that is related to the entire national defense industry. Nowhere is this more evident. The mainland used to import CNC machine tools with an annual growth of dozens of percent, but after the CNC machine tools of Jiuyi Heavy Industry were listed, the import business of CNC machine tools in the mainland immediately decreased sharply.

Under the contact of the Taiwan Machine Tool Federation, we will think differently. Some powerful CNC machine tool factories are ready to invest in the mainland to build factories, under the brand of Made in China to seize the CNC machine tool market in the mainland.

If the mainland wants to develop and catch up with Britain and the United States, it must vigorously develop industry.

The CNC machine tool industry is the key to the progress of machinery manufacturing technology.

Wang Ziqing, who first came to the mainland, saw that the mainland market was about to be monopolized by Jiuyi Heavy Industry, which had not yet studied the three-axis machining center, although they were essentially Taiwan machine tool factories, and it was not easy to compete with Jiuyi Heavy Industry.

After all, the top of the continent. It is very exclusive to Taiwan-funded enterprises.

Therefore, in order to seize a part of the market before Jiuyi Heavy Industry researched a three-axis CNC machine tool, Wang Ziqing joined forces with the mainland person in charge of the Taiwan Machine Tool Factory that is also preparing to build a factory in the mainland, and put all the machine tools they have in reserve into the mainland market.

Any business. As long as the CNC milling machine is made, it will not take much time to solve the manufacturing technology of the three-axis machining center, although the complexity of the technology varies greatly.

The three-axis machining center only needs to be produced. The problem of machine tool accuracy will be solved gradually.

On the surface, Jiuyi Heavy Industry is a private enterprise, but its predecessor was a branch of a military base deep in Daba Mountain. Has a strong military background.

Having a military background means that Jiuyi can easily get the support of China's major research institutes through the military. On the surface, China's technical research in machinery manufacturing is not strong, but that is because there is not enough financial support. In a poor and large country, it is difficult to allocate a small amount of money to all industries.

For a long time, China, which belongs to the red camp, has a weak foundation, and after ten years of great turmoil, and then began to carry out various infrastructure construction to develop the domestic economy, there is simply not enough research funds to undertake research in the field of high-precision and cutting-edge weapons, and then invest a lot in CNC machine tool manufacturing technology.

In order to avoid the rapid development of Jiuyi Heavy Industry and give them huge pressure on foreign enterprises, Wang Ziqing and the mainland leaders of several companies put a large number of CNC machine tools in the company's reserves into the market, so that the mainland CNC machine tool market tends to be saturated in a short time.

In this way, as soon as Jiuyi Heavy Industry's orders decline, it will make their pace of expanding production scale gradually slow down. At the same time, they are not profitable, and the lack of research funds will also slow down their research progress, so as to buy enough time for them, the machine tool manufacturers from Taiwan, to complete the infrastructure.

"Things have happened, and the most important problem we should solve now is not to say whose fault is here, but to find a way to solve the current problem." Qiao Dantong took a sip of the legendary West Lake Ulva soup, and at the same time threw a flattering eye at Wang Ziqing, but the words were said to Peng Zhi.

Hearing Qiao Dantong say this, Wu Chengfeng, who had just stuffed a piece of Dongpo meat into his mouth, almost choked to death.

It is said that women are big-chested and brainless, but they didn't expect that they could only take themselves seriously when they hooked up with a woman who had not been hooked up for a long time.

If it weren't for the fact that this woman gave him too much pleasure that he had never had in his life, he would definitely slap this woman into the West Lake.

"Oh, Lao Wang, what are you pulling me for? Am I not right? Jiuyi Heavy Industry is just a small factory in Chinese mainland, and now the monthly production capacity is only more than 200 CNC lathes, 20 or 30 CNC milling machines, there is no strength at all, do you need to pay so much attention? For Jiuyi Heavy Industry, Qiao Dantong still learned a lot through the company's information.

"Hehe, is that so? Xiao Wu, it seems that you Dingsheng CNC has found a very good assistant to the president! Peng Zhi stared at Wu Chengfeng mockingly, and asked Qiao Dantong: "Miss Qiao, I wonder if you can help us analyze, where are our confidence and advantages when we compete with local enterprises in China?" ”

Although Qiao Dantong has a diploma from Xiangjiang University of Finance, she doesn't have much ability at all, otherwise, she wouldn't have hugged the thigh of Wu Chengfeng, who was ugly from Taiwan, after a few years in the mainland, let alone Wu Chengfeng's bed.

Her ability is nothing more than in bed.

But now the richest old guy in Taiwan's CNC machine tool factory asked her to help analyze, she felt that her opportunity had come, if her answer satisfied this old thing, she would have more contact in the future, and slept with this old thing, and when he returned to the west, the huge family property was hers.

Peng Zhi has no descendants, and she knew the Tao not long after she slept with Wu Chengfeng.

The mindless woman couldn't see the mocking smile on Peng Zhi's face that was becoming more and more obvious.

"Our enterprises have huge productivity in Taiwan, and the mainland is just to establish an assembly plant, or not much scale, and can easily produce hundreds of CNC machine tools a month. In addition, although our enterprises are registered in China, neither capital nor technology can be owned by Chinese mainland. In the past few years I have been in the mainland, I have come to know very well the blind worship of these officials and private bosses on the mainland for imported techniques. "Although I relied on my body to get this job with a good salary, if I didn't have a few brushes, I would not have been able to become the assistant to the president of Dingsheng CNC in the Pearl River Delta Special Economic Zone.

"If Jiuyi Heavy Industry wants to compete with us, not to mention that it is impossible to convince many Chinese officials in terms of technology, but production capacity is their flaw. If they want to expand their production, they have to keep expanding all their departments......"

The more Qiao Dantong spoke, the more energetic he became, but he didn't see the ridicule on the corners of Peng Zhi's increasingly upturned mouth. (To be continued......)

PS: Thank you Tianhai Xiangyun for your big reward