After the assembly is completed, the headstock is filled with oil, and then the oil is added to each oil injection hole on the saddle, and the oil is filled on the guide rail, and the whole lathe is completed after the most difficult assembly.

"Factory director, why don't you go to Xinkaixing and borrow their deputy factory director to help us debug?" After completing the assembly, Zhao Bingbiao saw Yun Fei constantly spinning around the CNC lathe that only left the surrounding protective cover and protective door, as if to see what was lacking from the CNC lathe that had not been painted or even scraped the bottom ash.

Hearing Yang Bingbiao's suggestion, Yun Fei couldn't help but pout.

This person, it seems that he still can't be too low-key. This low-key, these people have even forgotten their biggest reliance on self-made.

"Which of you is going over there and help me close the switch!" Yun Fei said to the few people next to him who looked at him suspiciously.

Sample, the master doesn't show his hand, and he really thinks that the master is a nouveau riche boss. Yun Fei ignored Zhao Bingbiao, and directly called someone to close the switch, after the CNC machine tool is assembled, it is necessary to make some necessary settings for the PLC, although most of the functions inside, Huadu CNC has completed the pre-installation and some conventional parameter settings.

After the CNC machine tool is assembled, it cannot directly start the trial cutting of the part, and it must go through a period of dry operation. This dry run, like a car that has just finished assembly and walked off the assembly line, needs to be run and closed.

After the power was turned on, Yun Fei directly turned on the main power switch behind the machine tool in the puzzled eyes of everyone, and then twisted the red emergency stop knob on the PLC operation panel, and then gently pressed the green start button for starting.

Soon, the originally dark palm-sized screen began to flicker, and in a short time, paragraph after paragraph of English program moved rapidly from the bottom to the top.

Seeing this situation, everyone's mouths were wide open, who would have thought. This young boss can even drive a CNC machine!

Yun Fei only realized at this moment that he had always felt that something was missing in his heart. He, a factory that produces CNC machine tools, actually has no machine tool debugging personnel! Although the Soviet engineers had no problems with the design, they only designed an independent mechanical part and an independent electronic circuit part, and the assembly was still done by Yun Fei, the boss, from the beginning.

In the design of this machine tool of Jiuyi Heavy Industry, Yun Fei, the boss who no longer cares after the Soviet engineer threw out the assembly diagram as soon as he arrived here, has been low-key and makes people forget what he does.

"Qin Qingshan, an old thing, actually wants to wait to see Lao Tzu's jokes, knowing that Master Lu Dao wants to produce CNC machine tools. The CNC system was sent here, but there was no debugging personnel! Yun Fei scolded Qin Qingshan, the old guy who looked extremely kind on the surface, but was dark in his heart.

Huadu CNC hung the chairman's office, and the two signs in the general manager's office were being weighed down by the orders from the snowflakes Qin Qingshan, who was about to breathe, suddenly sneezed, and his left ear instantly turned red and became hot.

"Is someone scolding me? Also, I have offended too many people, and it seems that I still have to notify Yun Fei to come here for a shareholder meeting. Our Huadu CNC expansion is still too small......" Qin Qingshan shook his head and prepared to go to the workshop to take a look.

Since the listing of Long CNC, Qin Qingshan has not had a good night's sleep, many times. Those buyers who came from machine tool factories all over the country would even knock on the door of him, the general manager of Huadu CNC, in the middle of the night. Qin Qingshan was convinced that the customer Yun Fei said was God's creed, and he didn't have the slightest temper in the face of God not letting him sleep well. It's just that the system that Yun Fei took out is too powerful.

Hate only hate that there are too few workers in Huadu CNC! The hundreds of workers who have been trained for half a year have been able to do their jobs enough, and a hundred sets of CNC systems are born in Huadu CNC every day, but there is no way to cope with the orders that fly like snowflakes.

Zeng Hongqi, the executive vice president in charge of business, asked for the factory to be expanded every day. Qin Qingshan was also very much in favor of recruiting new workers, but was vetoed by Yun Fei, the second largest shareholder. In desperation, Qin Qingshan, Zeng Hongqi and others could only hide in Tibet every day, and they didn't even dare to leave the gate of the factory......

Yun Fei didn't know what to say, he was wrong to blame Qin Qingshan.

Although the system is produced by Huadu CNC, this system is taken out of Yunfei's hands. Especially later, many ladder programs and parameters in the system were made by Yun Fei.

Since even the most core ladder diagram program of the whole system can be compiled without thinking, and the parameter settings are more proficient than those of them who have played CNC for decades, Zeng Hongqi, who is in charge of business, did not think that no one in Yunfei's hands would debug the modified CNC machine tool when he arranged for someone to deliver to Yunfei.

Originally, the number of people was tight, if two or three more people were sent to Rongcheng on a business trip, and I don't know when Lu Dao would be able to complete the commissioning task, not to mention Zeng Hongqi, the vice president of business who has been asking for the expansion of the factory, did not agree, and even Qin Qingshan, who had always only carried out the upgrade of the dragon CNC system and the development of the new system, did not agree.

Yun Fei ran to Rongcheng to build a factory, or a machine tool production machinery manufacturing plant, when he wanted the CNC system, the factory has not yet started, who can know when he will be able to complete the production of the first CNC lathe? Most of the machine tool debugging personnel in the number of debugging dragon CNC systems were trained by Yun Fei at the beginning, and they didn't think that Yun Fei would not debug. If Yun Fei's main focus is on the production of CNC machine tools in the future, it is impossible for him not to train his own machine tool debugging personnel.

Set some parameters reserved for the machine tool manufacturer, such as the mechanical origin setting of the machine tool, etc.; Expand some ordinary CNC lathes are not commonly used functions, such as the end face of the thread, it is estimated that now even the people of Huadu CNC do not know the road, Long CNC can actually be used for the processing of the end face thread. Under the stunned gaze of everyone, Yun Fei's fingers quickly pressed on the operation panel.

With the rapid movement of Yun Fei's fingers, the display screen on the operation panel, which was originally blank, kept moving backwards and down, and every time it moved, there would be an extra letter or a number on the screen, and within a few clicks, the screen was filled with the program.

Most of the onlookers didn't know that the screen was full of letters and numbers, and they didn't know what Lu Daoyun was doing this. For the production and assembly of machine tools, they are all masters, but for CNC machine tools, they are especially unfamiliar!

"That's it!" Yun Fei let out a long breath, shook off the back of his hand that had been holding up slightly sore for a long time, and said to the onlookers.

"That's good? I'll go find a blank and find a few turning tools to try...... "Yang Bingbiao doesn't know what Lu Daoyun Fei is doing with these things they can't understand.

"......" cloud is not speechless.

After explaining for a long time, it took a puzzled look for everyone to understand that this is only to complete the setting of some basic parameters of the machine tool, as well as the preparation of the running program, and now the machine tool can run, but it is only the simplest operation of the running CNC system for the machine tool.

Yun Fei gently pressed the green button at one time, and the spindle of the first CNC lathe of Jiuyi Heavy Industry did not have a mechanical chuck, and it slowly rotated under the gaze of everyone. At the same time, the saddle on the rail began to run back and forth along the rail at a rapid pace, and the center plate was constantly moving back and forth.

Yun Fei observed the movement of the tool holder, and at the same time began to explain the necessity of debugging the CNC machine tool after the assembly was completed.

Because in his own world, he also went to many CNC machine tool manufacturers to see the assembly line of CNC machine tools up close, but when Jiuyi Heavy Industry began to produce, he forgot the most important training CNC machine tool debugging personnel.

If it weren't for the appearance of this CNC lathe, which was at least half a year earlier than Ji Luzhong, he would not have remembered that there was one of the most important debugging processes after the assembly of the CNC machine tool. If the CNC machine tool is not debugged, even if it is well assembled, it is impossible to have good machining accuracy.

Yun Fei has never been so dissatisfied with his work in the original world as he is now, not in the CNC machine tool manufacturer, but in the production machinery enterprise that uses CNC machine tools.

Fortunately, Jiuyi Heavy Industry's current CNC lathes are just experimental production, and there is still a long time to train the personnel who debug the machine tools. As long as the program of debugging the machine tool is recorded, and then some parameters that need to be set by the machine tool manufacturer are recorded, and the future debugging personnel only need to enter these parameters into the CNC system, and after setting things such as the origin of the machine tool, the debugging program can be used to debug the CNC machine tool.

As for the detection of assembly problems, in the process of machine tool debugging, most of the problems can also be found, as long as there is no problem after debugging, there is no need to carry out the trial processing of complex parts on the machine tool, the CNC machine tools produced by Jiuyi Heavy Industry can enter the market.

Since the problem has been found, it must be improved now, Yun Fei asked Yang Bingbiao to find a few six- or seventh-level assembly fitters in his thirties in his assembly workshop, and called Qin Qingshan to ask him to lend him the best machine tool debugging personnel for two months, and then began to train those future machine tool debuggers, and began to process and test the CNC lathe that was moved to the finishing workshop.

Yun Fei, the young boss of Jiuyi Heavy Industry, was immersed in the test of machine tools, and did not know that he had no fame, but he had just established a machine tool manufacturer for two or three months, and had been in the most mainstream media in this era under the publicity, so that all domestic machine tool manufacturers remembered the name of Jiuyi Heavy Industry. (To be continued......)

PS: Kowtow to thank Ice Marks for the big reward, and the big monthly pass of the "Easy Scholar......