"Well, it can't be measured in terms of scale, right?" Wang Ziqing didn't understand Peng Zhi's words.

CNC machine tools are not other industries, this industry, the fight is technology and capital.

If measured by the scale of production, it is estimated that there is not much in the entire world that can be compared with these machinery factories on the mainland, which often have tens of thousands of people. The fact is that these mainland machine tool factories, in the CNC machine tool manufacturing industry, are not even comparable to Taiwan's most garbage newly established third-rate CNC machine tool production plants.

It is impossible for the mainland government not to know such a thing.

Or do they think that as long as they get the technical data, they will be able to produce a CNC machining center that can compete with them in a short period of time?

Is this possible?

If this is the case, perhaps these state-owned machine tool factories in the mainland have imitated the CNC machine tools imported from various countries in the world a few years ago!

CNC machine tools, when it comes to things, are not a little bit.

Even these Taiwanese CNC machine tool factories have to import the CNC system used in CNC machine tools, servo motors used to transmit feed and DC stepper motors from Japan......

"Many officials on the mainland think that quality is not good, and it can be made up for by quantity......," Peng Zhi said lightly, and then prepared to get up and leave.

"By the way, Mr. Wang, when there is any action on the mainland market in the future, please report it first, this time if the 9327 factory started by Jiuyi Heavy Industry is not taken back by the Ministry of Industry of the mainland, it is estimated that we will have to gain a firm foothold on the road, it is difficult. Jiuyi Heavy Industry is now cooperating with Haer Heavy Industry in Northeast China to produce a large number of large castings used in processing centers...... "When he was about to leave, Peng Zhi straightened his face and said to Wang Ziqing.

Thanks to their dealings with companies in Europe, the United States, and the world, these companies in Taiwan have developed a good habit of gathering intelligence on their competitors.

The cooperation between Jiuyi Heavy Industry and Harbin Heavy Industry, although the mainland media has not reported it. Anyone who has a heart can know this matter from the raw material procurement and logistics of Haar Heavy Industries.

"Jiuyi Heavy Industry has the strength to produce three-axis machining centers?" During this time, he has been busy building his own factories in the mainland, and he has not paid much attention to collecting intelligence on these competitors in the mainland.

With the existence of the Taiwan Machine Tool Federation, Taiwan's various machine tool enterprises, in the mainland market, intelligence is shared, and Wanyou Group will inform them of any competitors' information.

Taiwan's machine tool companies are also competitive, but when they enter the mainland, their main competitors are these machine tool factories in the mainland. When there is no large-scale occupation of the mainland market, the competition between them will not be too fierce.

Otherwise, these enterprises, under the pressure of CNC machine tools in Europe, America and Japan, will not be like mushrooms after a rain, in just over ten years to establish so many brands of enterprises, and still survive in the cracks of Europe, America and Japan markets, and develop and grow.

"It's not just a three-axis machining center. The young boss of Jiuyi Heavy Industry. I also have the production technique of the simple fourth axis in my hand! "For Yunfei's Jiuyi Heavy Industry, they have paid enough attention to it, but they didn't expect that this small factory, which has only been established for more than two years, has made such progress in technology.

At least. At present, Taiwan's CNC machine tool factory has encountered problems in the research and development of four-axis machining centers.

This kind of technology is a key technology that belongs to the core competitiveness in the entire world.

Most of the CNC machine tool manufacturers in the world only have ordinary CNC machine tools with three axes and below. Machining centers with 4 axes or more. Only in Europe, the United States and Japan, these traditional CNC machine tool manufacturing powerhouses are in the hands of some large manufacturing companies.

In this day and age, it is simply impossible to buy it!

"We are underestimating our most powerful competitor in the mainland!" Wang Ziqing suddenly said with annoyance.

If he had known this information from the very beginning, he would never have put a large number of Taiwanese CNC machine tools on the market at a low price after the factory in their mainland had not yet been built! This startled the snake. If Jiuyi Heavy Industry had not been crippled by the mainland government, it would have been a bit difficult for them to develop in the mainland.

"Not only do you underestimate them, but I also underestimate them. Since the mainland government purchased several four-axis machining centers from Germany in '92, it has not been as urgent as before. It is important to know that in terms of the number of troops on the mainland and the equipment needed, there are no hundreds or thousands of four-axis machining centers, which are simply not enough. And they are now looking for a five-axis machining center...... "These information are all the news obtained from the Taiwan government by the staff of Wanyou Group in Taiwan during this time.

Since the end of the 70s, after the mainland's reform and opening up, a large number of enterprises in Taiwan, which had been greatly affected by the Japanese financial crisis, discovered the huge opportunities on the mainland, roared into the mainland market, and used their huge financial strength to open all kinds of factories in the mainland, taking advantage of the mainland's abundant and cheap labor costs and abundant resources to rise again among the four Asian tigers that had declined.

The mainland's economic development in recent years has attracted the most capital, which comes from Xiangjiang, which is still under the rule of the British Queen, and Taiwan's capital, which has been clamoring for the establishment of a state.

In the earliest years of reform and opening up, the mainland's approval of foreign investment, that is, these capitals belonging to the same ancestor as the mainland, were the easiest.

With the inability of Taiwan and Xiangjiang to succeed in capital, the mainland began to increase its efforts to absorb capital within the world and use these foreign capital to stimulate its own economic development. And take this as an opportunity to carry out a large number of domestic infrastructure construction.

"Five-axis machining center, there shouldn't be any country that will sell it to the mainland now, right? Although many years have passed since the Toshiba incident, Europe and the United States have not relaxed their scrutiny in this regard. Mr. Peng, how should we deal with such a situation next? Wang Ziqing really didn't expect that he would encounter such a situation when he first entered the mainland market, and he should have entered the mainland market as soon as he knew it.

"How to deal with it? We can only wait! Now that I've done my best, the rest of the time is up to God! Peng Zhi said coldly.

Before entering the mainland market, these companies have already established an alliance to collectively deal with the unexpected situation in the Chinese market.

And now the factory has not been officially put into production, it has caused a backlash from Jiuyi Heavy Industry, if the young boss of Jiuyi Heavy Industry cooperates with those large state-owned machine tool factories, they will be in danger.

Although they set up factories here for the market in Chinese mainland, flaunting China's own CNC machine tools. But compared with Jiuyi Heavy Industry, a native local enterprise, there is no advantage at all.

We can only use the thinking of some officials on the mainland who feel that the moon abroad is rounder than China's to find a breakthrough.

Wu Chengfeng fooled around with that Xiangjiang woman every day, and he didn't pay much attention to China's competitors at all, so he would cry when the time came!

"I have to go back to Taiwan during this time, and it is best for your own factory to speed up the progress a little more, and it is best to keep the product on the ......market at the same time as our Wanyou Group in March," Peng Zhi saw that it was not early outside, and got up to leave.

Taiwan's CNC machine tool companies in the mainland are building some assembly plants, the largest Wanyou in this factory a year of production capacity is only designed to be 3,000 units per year, at present, it seems that it is simply unable to meet China's rapidly increasing market.

He was very worried that the young boss of Jiuyi Heavy Industry would engage in a price war with them, which would be a disaster for them with huge debts!

"Are you going back to Taiwan?" Wang Ziqing did not expect that Peng Zhi would choose to leave the mainland and return to Taiwan at this moment.

Is he going back to avoid suspicion or is he going back to prepare to deal with the changes in the mainland market?

"Yes, the ticket for the morning after tomorrow." After Peng Zhi finished speaking, he left the private room of this teahouse without looking back.

The shaft is not enough and conspiracy!

Peng Zhizhen didn't know where Wang Ziqing's previous shrewdness in the Taiwan market had gone.

Jiuyi Heavy Industry's CNC lathes have stood a large market share in the Chinese mainland market in a short period of time, Wang Ziqing actually gave up his own advantages, and wanted to compete with Jiuyi Heavy Industry in the Chinese mainland market CNC lathes!

It is important to know that Taiyu's CNC lathe, in the mainland market, can only be regarded as the technical level between low-end CNC lathes and mid-range CNC lathes. If it is imported, this still has the advantage of importing, but once it is produced locally in China, this is not enough at all.

At least, their production costs cannot be compared with those of companies like Jiuyi Heavy Industry. They don't know the production cost of Jiuyi Heavy Industry, but they can know from Xin Kaixing, which also belongs to Yunfei's industry, that the production cost of these factories is not higher than that of Taiwanese enterprises.

Lower production costs and higher technology mean more market profits.

If the machining center can not defeat Jiuyi Heavy Industry, once Jiuyi Heavy Industry develops, they from Japan or Italy some third-rate CNC machine tool factories to buy production technology of Taiwanese enterprises, in the mainland market, can only in Europe, America and Japan large CNC machine tools and Chinese local enterprises to rise in the gap between Jiuyi Heavy Industry.

China's CNC machine tool market, the low-end market has a large number of state-owned machine tool factories with production capacity can be called terrifying, the highest profit has the production of mid-range CNC machine tools Jiuyi Heavy Industry and Europe, America and Japan exported to China machine tools, as for the highest profit of high-end CNC machine tools, in Chinese mainland, basically only a few strong companies have a small amount of exports.

These Taiwanese machine tool factories are very reluctant to produce mid-range CNC machine tools...... (To be continued......)

PS: Thanks to Transformers for being my big monthly pass.

Today's third update is presented.