"Are you an expert from the Soviet Union?" Facing the blonde and blue-eyed Caucasian in front of him, the old man asked curiously.

Jiuyi Heavy Industry has a lot of engineers, experts and senior skilled workers from the Soviet Union, and many people in China know about this. After the collapse of the Soviet Union, China took the opportunity to network many experts to contribute to China's national defense, which became the leader of the red camp after the Soviet Union.

However, most of the experts from the Soviet Union were in the Chinese military factories, and it was difficult for the outside world to see them. However, after Kamat started the headhunting business, a large number of Soviet engineers and technicians were fooled into China, which is a very common phenomenon in the coastal areas.

The experience and skills of Soviet engineering technicians are much richer than those of Chinese Chinese who have not received professional training, and the cost is much lower than that of engineering technicians in European and American countries, and they are very favored by the bosses of Chinese private enterprises whose development is limited by the talent gap.

"Yes, Mr. President!" Tanaria didn't know that the old man had retired a long time ago.

"Deng Lao, this is the chief engineer of our electronics division, Tanalia, from Ukraine." Regarding Tanaria's address to Deng Lao, Yun Fei didn't know whether he should correct it or not, no matter what, it was not his turn to intervene in this matter.

"Oh! Lady Tanalia, my old man has long since retired, and you can call me Deng Lao like them. Thank you for your contribution to our CNC machine tool industry in China. How is it, are you still used to it in China? The old man didn't expect that the chief engineer of the electronics division of Jiuyi Heavy Industry was actually a skilled person.

"Thank you for your concern, our boss is very good and has created a good research environment and living environment for us. It's so much better than in the Soviet Union......" Tanalia didn't forget to pat her young boss on the back at this time.

She knew that only when the boss was comfortable could she happily sign the research project they had declared, and then pay for it happily.

While listening to Yun Fei's introduction, Deng Lao shook hands with the project leaders of these research teams, most of whom were Soviet, for everyone. It's all thanks.

For Vissarionlovich, who stood side by side with Sun Lin and Situ Heyun in the research team, this made the old man a little surprised, and while shaking hands with him, he cast an inquiring look at Yun Fei.

Yun Fei put his mouth to the old man's ear and whispered something, which made the reporter a few meters away very curious. However, this picture was captured by almost all the reporters.

This visit of the old man was originally private, and the outside world had a strong curiosity about the Jiuyi Heavy Industry Research Institute, which was established for a short time but was very mysterious.

It is reported that there are many major scientific research projects in this private research institute. The state did not set up the project, it was all privately funded by the boss of Jiuyi Heavy Industry, and it was not reported to the state!

This photo alone can make all journalists feel that the trip is worthwhile. Old people who have retired to the elderly, young rich people who have just grown beards on their mouths, and young people who are not very old and who are the leaders of the research team of high-tech projects! There's so much hidden in this that it's worth digging into.

It's a lot of private things that can't be seen in the newspapers, but what major projects in the research institute of Jiuyi Heavy Industry can't make most of the national ministries and commissions know?

Jiuyi Heavy Industry, like the Rongcheng Municipal Party Committee and Municipal Government, did not hold any welcome ceremonies such as flowers, so that a middle and high-level cadres greeted them outside the office building and then brought the members of the delegation to the production workshop.

"These devices. Most of them are the old equipment in the original 9327 factory, which has been repaired and transformed by researchers from China and the Soviet Union, which is almost one-third more energy-efficient than the old model, and the production efficiency has increased by 20 percent. "The government has not arranged a tour route. The entire delegation visited Jiuyi Heavy Industry in accordance with the route arranged by Jiuyi Heavy Industry itself.

In order to let these people who are not born professionally and don't even understand what CNC machine tools are going on to have an intuitive understanding, under the joint decision of Yunfei and Xie Heping, the delegation visited the smelting workshop of Jiuyi Heavy Industry directly.

This is the tour itinerary. In fact, it is the process flow of the entire CNC machine tool production.

However, between the old man has been ninety-one years old, the delegation is divided into two parts again, most of the foreign delegation is the entire 91 heavy industry CNC machine tool production workshop. Accompanied by Wu Zhongda. After visiting the most basic smelting and casting workshop, the old man will directly enter the assembly workshop, and then the main thing is to visit the independent research institute.

Therefore, for the old man's visit to the smelting and casting workshop, which was only introduced by himself, he explained very hard. You must know that for smelting and casting, he, the general manager who studies manufacturing rather than material majors, does not have a special understanding.

"Yes, who says old equipment can't make good equipment? Your experience should be promoted throughout the country, our country is not rich, and there is a lot of room for improvement in terms of energy conservation and production efficiency. These old devices, since they can be used

Why do you have to replace those new equipment that cannot be greatly improved in terms of production efficiency and quality? The old man was rarely relieved to hear that Wu Zhongda introduced that all kinds of furnaces in the smelting workshop of Jiuyi Heavy Industry were old equipment and second-hand equipment that had been retrieved from the Soviet Union.

Yun Fei, a young man, knows how to live a good life!

To do business, we must give full play to people's subjective initiative, and strive to improve their own technical level, everything is expected to buy new equipment, which can not be improved quickly, and at the same time, there can be a great accumulation and improvement in the technical level.

Up to now, most of the small foreign capital in China has been taken away by foreign equipment manufacturers!

This made the old man very sad.

"Yun boy, yes, very good." After the old man finished speaking, he praised Yun Fei with a smile on his face.

For this young man, who he was very optimistic about from the beginning, the old man did not hesitate to praise.

"Mr. Deng, you have won the award. I was also forced, if it weren't for the thousands of people in the whole company to raise, I would also want to buy new equipment! Do it yourself, after all, it's too troublesome! For this, Yun Fei is still very proud.

Of course, these old equipment can be transformed into the current state, but it is all thanks to the blessing that he stayed in that state-owned factory for so many years as a technician. He didn't study materials, so he didn't know much about the equipment used to make materials, but many of the products they produced at that time were used in the military industry. Therefore, the requirements for the furnace batch number of the material are very high.

Even if it is used in equipment, the operator of all production processes of the product can be traced from the furnace batch number! Therefore, in many cases, the machining workshop must be in contact with the melting and casting workshop where the materials are produced at any time. I am often familiar with the technical parameters and structure of the high-temperature furnaces used for smelting and heat treatment.

"Deng Lao, this is our CNC machine tool assembly workshop, in addition to the servo motor used for transmission and some electronic and electrical units for feedback control, most of them are domestic." Yun Fei Zhidao old man has considerable expectations for domestic production, but the servo motor or stepper motor used by CNC machine tools to drive is not produced in China, and the old man cannot be deceived at all in this regard, otherwise, China's first CNC machine tool manufacturer will not fall to the construction of less than two factories in Jiuyi Heavy Industry

years at the head of a private enterprise.

"When will all spare parts be completely in-house?" Seeing that the entire workshop was full of CNC lathes and CNC milling machines being assembled, the old man was about to praise Yun Fei, but he heard Yun Fei's words - the core components could not be completely produced independently, and his face was lonely.

If it cannot be completely domestic, it is very likely that Jiuyi Heavy Industry will be stuck by foreign parts suppliers when competing with foreign countries.

It is estimated that this is the reason why the young man in front of him did not expand the production scale of Jiuyi Heavy Industry.

Once Jiuyi Heavy Industry expands its production scale, it will fully open up competition with foreign machine tool suppliers. Now it is because of the emergence of Jiuyi Heavy Industry's products, foreign CNC milling machines and CNC lathes have carried out large-scale price reductions, if you wait until Jiuyi Heavy Industry has developed a three-axis machining center, those foreign CNC machine tool manufacturers will feel threatened.

After all, CNC lathes and CNC milling machines are not products imported from China on a large scale, and linkage machine tools with more than three axes are the main products of China's CNC machine tools.

"Now the institute is conducting a comprehensive research on core components, if nothing else, within three years, these core components can be completely domestically produced. The Rongcheng Viewpoint Research Institute has now begun to study the grating scale used by CNC machine tools for CNC machine displacement detection, and it is estimated that samples will be produced by the end of this year......"

Three years, at least a conservative estimate.

The research of AC servo motor of Jiuyi Heavy Industry has already begun under the leadership of Situ Heyun, and at the same time, Huadu CNC is also researching this aspect, but it has not yet made breakthroughs.

"In other words, your CNC machine tool production will have to wait three years before it can be scaled?" The old man sighed.

Because of the concern for Yunfei, the old man of the CNC machine tool market also has some understanding. The domestic demand for CNC machine tools is growing every year, but those state-owned machine tool factories are not angry, and always want to rely on the introduction of production technology from abroad, while ignoring their own technology accumulation and development.

However, multi-axis linkage CNC machine tools with more than three axes belong to a kind of strategic equipment in the entire world!

Only Jiuyi Heavy Industry can carry the banner of national industry in the CNC machine tool industry. (To be continued......)

PS: Thank you Tianhai Xiangyun for your big reward, thank you for your mother's bad son, ancient Jiangjin, really boring, Ziyi, sad in the dark corner of a few big monthly passes.