Chapter 1534 Gem Processing

The mines are all operated by manual methods, and the production volume is much less than that of mechanization, but a few lucky miners will improve their lives through their efforts.

Such independent mines can be found all over the world, and they also supply the jewelry market with a large number of colored gemstones, including emeralds.

Emerald found after a day of hard work can bring peace of mind to independent miners and their families and the motivation to continue looking for emeralds.

Many independent miners sell their harvested emeralds to larger miners, or to local jewelry brokers, who take the gems to the market for a commission.

Now, screening emerald gemstones, Han Peacock does not have any labor-saving methods, can only rely on the most primitive methods, can only hand wash, separate and select gemstones.

Fortunately, the mine was easy to excavate, easy to transport, and most importantly, there was no pressure on production, so a few people started the most basic mining work step by step.

After a week of mining, the mine cave was already very deep, and at this time, Han Peacock and they no longer dared to use ZHA medicine casually, they were afraid of landslides.

However, there are now enough ores for them to sort, and they need to pick out all the emerald gemstones from these ores.

Pick out the emerald gemstones, the rest of the work begins to identify the quality, Han Peacock first did is to classify the emerald rough by grade, after the rough stone has been trimmed, the emerald is classified according to size, shape, color and clarity grade.

Some mining areas, by this time. Most of their clients are gem cutters who have a wide range of size and quality requirements, and the mine carefully sorts the gemstones. to meet the individual needs of our customers.

The fine classification of rough stones can bring a higher market price and make more money for the mine, but Han Peacock does not have a professional cutter here, so he is naturally on the same page as the Golden Demon.

At this time, Han Peacock began to rejoice, fortunately the Golden Demon and Mu Ling learned jewelry design, otherwise. There's really no one to help.

The final process is the fine picking and removal process, where the rough emerald is removed from excess impurities and imperfections.

When the emerald rough has been finely graded. As cutters, Han Peacock and Golden Demon are more convenient to pick, they need a range of gemstone size and quality, and it is also easier to count the quality of gemstones.

Better than the quality of the gemstone that needs to be identified. So even if it's a very small rough stone. Still according to the requirements, carefully according to the shape and quality level, classified and summarized.

The sorted and summarized emerald rough is ready to be cut into the perfect gemstone, and finally after a series of processes, it is made into jewelry and the price is calculated.

Now Han Peacock just wants to count the emerald production in these seven days. Determine its quality and calculate the price of this batch of emeralds. In order to determine the value of this emerald deposit.

Therefore, these days, Han Peacock, Golden Demon and Earth Spirit are the busiest, Han Peacock only needs to cut and polish gemstones, but the Golden Demon is not good, he also needs to manually dig the mine cave and continue to go deeper, of course, Earth Spirit is also indispensable to do this kind of work, and it is all weather.

Now there is only a twenty-centimeter gap in the mine, and the golden demon needs to dig forward a few dozen meters without touching the zha medicine, because after reaching a few tens of meters, he can find a cave that barely passes through one person.

And it's not over here, after going deep for 100 meters, you can find a cave that allows people to walk upright, if you continue to go deep for 300 meters, you can find a group of caves, although the passage is still not spacious, but it has been able to let many people enter.

With Han Peacock's ability, he could only perceive such a deep distance, so no matter what the situation was, Han Peacock didn't know what the situation was, which made him pin his hopes on the Golden Demon and Earth Spirit.

If it can go 400 meters underground, the perception of the Han peacock can continue to extend down for 400 meters, and if there is a cave downward, then the detection range of the Han peacock will be wider.

If it weren't for this reason, Han Peacock would never have wasted time and effort digging the mine here himself.

Only two people, the Golden Demon and the Earth Spirit, can only come to the mining hole, and Han Peacock, who has nothing to do, can only identify the mined emerald gemstones.

Once the mined emerald gemstone has been sorted, the rough must be inspected and cut in shape and orientation to ensure that the maximum gem weight remains, and a decision must be made on which cut to retain the maximum gem weight.

After that, the next critical step is to polish the rough to its original shape, called preform, and this stage determines the final result of the gemstone's positioning, shape and weight.

After preforming, it is time to cut the facets, which determines the gemstone's fire brilliance and polish quality, as well as unleashing the potential charm of the emerald, which is usually done by Han Peacock himself.

Han Peacock will create the best angle of light refraction in the gemstone, so that the maximum refraction of light returns, avoiding the creation of light leakage window.

During this process, Han Peacock needs to constantly check each facet to ensure that the angle and symmetry after polishing are absolutely accurate.

The final polish will create brilliance and sparkle, which is an intuitive condition that catches the buyer's eye.

Cutting emeralds is a technical job, not that the larger the emerald, the higher the selling price, which depends on the needs of the market.

Emeralds come in a wide range of sizes, but gemstones are often precisely cut to the size typical of the industry, rather than the shape of the maximum weight, which can fetch a higher price per carat.

In the offices of all cutters and wholesalers around the world, the product list is constantly updated and prepared by category to meet the various requirements of customers and to prepare for various trade fairs.

Since it is to calculate the output value of the mining area, Han Peacock naturally needs to follow the rules, and after this place is bought, it will be a gemstone company integrating mining, cutting, and wholesale.

Han Peacock selected a lot of emeralds of similar color and size, and after cutting out the cracks and regularizing the shape, these emeralds became almost the same, such a group of emerald gemstones with matching conditions can help create a delicate emerald necklace.

There are also some scattered pieces that have been cut into very beautiful shapes by Han Peacocks, which can be set directly on custom jewelry.

Those high-quality solitaire emerald gemstones are designed to be used as the material of choice for custom jewelry.

The final design is the most important part, and the final design prototype will be presented to the most affluent customers in the world's best retail salons.

Emeralds are classified as high-grade gemstones, so the processing is often selected according to the variety, and the material should be carried out by experienced personnel.

Because it is a high-grade gemstone, each step of sitting up is designed first, and then cut, and in this process, the wood spirit also comes into play.

There are too many emerald gemstones, especially some small fine emeralds, which cannot be wasted, so each one needs to be designed in a targeted manner before cutting.

And it is with the help of Mu Ling that Han Peacock's work can continue to speed up.

With more and more emerald gemstones being processed, Han Peacock's experience is becoming more and more abundant, of course, some gemstones wasted in the middle, don't care.

After the selection of materials, it is generally necessary to carefully observe the raw materials to understand the intrinsic quality, cracks, inclusions, crystal optical orientation, cleavage, etc., determine the available part and the part that needs to be removed, and then design and cut the gemstone according to the habits, specific shapes and processing habits of the specific gemstone.

The design of the shape of the gemstone should be conducive to the refraction, reflection or special optical effect of the gemstone, so that the precious gemstone can show its inner and external beauty through a series of glossy surfaces and edges, and be more brilliant.

In addition, consider whether you can maintain the volume of the gemstone as much as possible.

In terms of style, after a long period of practice and research, a large number of popular gemstone design styles have appeared in the world, and there are certain requirements for the smooth quantity, angle and shape of gemstones in various styles.

Styles also often have their own names, such as diamonds are often designed in the shape of a square octagon, florentine (double rose) shape, diamond round and other popular styles.

Once the style is designed, the gemstone is cut, ground and polished.

Cutting gemstones, also known as "cutting", is usually carried out with a gemstone cutting machine with an emery circular saw, fortunately, before coming here, Zhou Meiren prepared a full set of gemstone processing tools for Han Peacock, otherwise, Han Peacock would not be able to do anything.

In fact, the processing machines of all kinds of gemstones are similar, and many of the tools used to cut diamonds can be used to cut emeralds, and the tools used to carve jade can definitely be used to carve and polish emeralds.

Zhou Meiren is very well prepared, so Han Peacock is also very convenient to use.

Grinding and polishing can be carried out on a special gemstone grinding and polishing machine, which has a manipulator that can stick to the gemstone blank, and the manipulator can adjust the angle and pressure.

There is also an electric grinding disc, which can be equipped with diamond grinding discs and polishing discs of different thicknesses, the general procedure is to first coarse grinding and then fine grinding, and then add polishing agents such as alumina, cerium oxide or diatomaceous earth for polishing.

Although there are semi-automatic cutting machines, it is difficult to standardize gemstone processing, and it is mainly necessary to rely on grinders with rich and good cutting techniques and certain gemological knowledge.

Therefore, some of the world's precious gemstones are designed and processed by celebrities, and emeralds are the world's top gemstones. (To be continued.) )