Now I heard, just heard, that the automobile industry in the United States and Germany has gradually begun to replace the large number of experienced and skilled workers needed with automatic production lines.

The reason why I heard of it is because these high-precision and cutting-edge manufacturing techniques and control techniques in foreign countries are too good for China.

Especially the devils, who are selfless and do not die, will not tell China about the research direction of these high-end techniques. If China wants to figure it out, the devil will even steer China in the wrong direction. In the world of Yunfei, the four-axis linkage machining center equipped with PMC module is the most obvious example.

Countless machinery production enterprises have spent a lot of manpower and material resources to study such a four-axis machining center, and in the end, it is too difficult to find that such a four-axis machining center wants to develop on the five-axis linkage machining center! Taiwan's CNC machine tool companies have also suffered a lot. If it weren't for the fact that they spent a lot of money to buy bankrupt CNC machine tool companies in Italy and Spain, which are third-rate manufacturing technology countries, it is estimated that they will never get the production technology of five-axis linkage CNC machine tools.

Chinese mainland is even more wrong. They are wrongly guided by foreign countries towards light machine tools with high rotational speed and high moving speed. However, due to the inability to supply materials in China, the manufacturing process cannot meet the requirements. Only the core components and materials can be imported from abroad, the imperialist capitalists are eating people and not spitting out bones, and these domestic machinery companies must spend a lot of money to get the materials and accessories that are not considered the top abroad. In this way, the production of equipment can not compete with similar foreign products because of processing accuracy!

For every mid-range CNC machine tool produced in China, almost one-third of the profits will be handed over to foreigners! Similarly, low-end CNC machine tools have to give a lot of money to old diplomats because most of them are imported because of servo motors and ball screws.

Lunch was casually solved under the reminder of the waiter, and after the meal, the two old guys pulled Yun Fei to talk about the current situation in China and the development direction abroad. Yun Fei talked to Sun Lin and Situ Heyun about the beginning of the lantern, and then forcibly left under the expressions of the two old men. He was worried about going on, and the two old fellows pulled him to talk by candle. He couldn't take it anymore.

Although the two old men did not give a clear reply to Yun Fei at the very end, they still told Yun Fei very seriously that they promised to put forward Yun Fei's conditions to their superiors and reply to Yun Fei as quickly as possible. The words of the two old men are not the official statements of Zhao Xingbang, which makes Yun Fei's perception of the two old men a lot better. In fact, Yunfei does not necessarily need to obtain patent rights, but he must ensure that the results of his project will not be easily taken away by others for free.

Otherwise, when he produces such a four-axis machining center in the future, he will face a cruel Chinese-style price war. That's shooting yourself in the foot. After all, at that time, he had no way to compete with those state-owned machine tool manufacturers with state financial support behind him. In the end, what he came up with was the ultimate reason for the collapse of his business.

Of course, Yun Fei also told several people about such concerns. This made Zhao Xingbang full of guilt, and at the same time, he had to cooperate with Yun Fei, a young man under eighteen years old, to be impressed by the long-term vision. He only saw the huge market value of this PMC module, but he did not think about the consequences of the simultaneous production of several factories under his control. If the patent is put in the hands of the state, it is almost in the hands of all the state-owned machine tool production factories in China.

China now has hundreds of state-owned machine tool manufacturers, and the market demand has not been fully cultivated and matured. Hundreds of machine tool companies because of such a product in the domestic machine tool market for a tragic fight, who still has the heart to engage in research, production? This is a disaster for the entire Chinese manufacturing industry that is even greater than the impact of the great turmoil more than ten years ago! Zhao Xingbang is not an idiot. It's not a novice who doesn't understand the market at all. China has now begun to transform into a market economy, and if he wants to rise to the top, he must not fail to keep pace with the times, which will inevitably be eliminated by the whole society.

Including pure market novices like Ma Ji. was also impressed by Yun Fei's long-term vision. Others are still staring at the huge profits brought by this project, and Yun Fei has already begun to think about the hidden dangers. The so-called born in sorrow, died in peace. Could it be that Yun Fei is like this?

The second contact with the military has made a lot of progress, but Yun Fei didn't have time to get excited. At this time, he was spending a few CNC LSK9201C1 with Qin Qingshan's old guys to conduct the most difficult experiment.

On May 23rd, at 3 o'clock in the morning, Huadu CNC system debugging workshop.

"Master Li, please set the amount of the knife to be smaller, and when the thread is turned, the amount of food should be smaller, and a few more knives will be taken, we need more subtle gap changes. Pay attention to the difference between the actual size of each knife and the parameters we set after processing, and I went out to smoke a cigarette ......," Yun Fei said tiredly to Li Weiguo, a system debugging technician of Huadu CNC.

Since the last time Zhilu Dao Xiaoping has not toured the south, he is absolutely now such a good opportunity, can not be wasted, must let the Chinese economic development planner who has always attached importance to science and technology to Huadu CNC to inspect, not only can further enhance the popularity of Huadu CNC in China, for the future development will be more beneficial.

After Xiaoping inspected the number of flowers, Huadu CNC will definitely be shaped into the first independent brand manufacturer of China's CNC system. This will usher in all the domestic machine tool production factories that have wild skills in the CNC machine tool market, and will also recruit the devil FANUC, Mitsubishi, Mazak, which have an increasingly heavy market share in China. They will definitely not want to see China's CNC machine tool industry rise because of its own mid-range CNC system!

As long as China can produce its own CNC system, it will not be limited by the number of CNC systems and cannot increase the number of CNC machine tools. Foreign CNC systems are exported to China, are subject to strict quantity restrictions, they do not want to lose China, a country where CNC machine tools are almost a blank.

In particular, Chinese mainland is the largest market for Japanese CNC machine tool exports. Europe has Germany, the first country in manufacturing technology, Switzerland, Britain, France, Italy The production capacity of CNC machine tools in these countries is not small, and it is difficult for Japanese CNC machine tools to squeeze into Europe; The Americas, not to mention, have the existence of the United States, a scientific and technological country with the world's largest manufacturing capacity, and the machinery factories in the United States simply cannot allow little devils to get involved in their market.

Japan is close to China, and the proximity to the water is the first to get the moon. Although there is Taiwan, a flea that does not recognize it as China's territory, is competing with them for the market of CNC machine tools, but with a small island as big as Taiwan, it is undoubtedly a fool's dream to fight shirtless with devils. Taiwan's CNC machine tool manufacturers, the control system comes from Japan, most of the steel comes from Japan, the ball screw is also from Japan, and the servo motors are from Japan.

Although the Western market in China is far less huge than Japan, because Sino-Japanese relations have always been a hard wound for devils to enter the mainland market, so Chinese mainland's official procurement of CNC equipment, European and American machine tools are also a lot.

The competition between the devil and the Western market is a real gentleman's dispute.

In China, there is a CNC system, although it will be impossible to produce high-end machine tools because of material problems, but it is a matter of time. If you want to curb the development of China's CNC machine tools, in order to avoid the devil's domestic CNC machine tool market being seriously squeezed, do not suppress CNC system manufacturers, is it possible to use the export of ordinary five-axis machining centers or precision five-axis machining centers to the mainland, tell Chinese officials: "What equipment do you need, we will sell what equipment to you, you don't do it yourself, after all, it is too wasteful of money, although you China has developed a lot of economy, but there are still many people who have not solved the problem of food and clothing, Use this wasted money to improve your domestic infrastructure...... "Let Chinese mainland voluntarily give up the research and development of high-end machine tools?"

Is this possible?

The most familiar country in the world is definitely Japan.

China will never take the initiative to put its neck into the hands of other countries and let others pinch it whenever they want. Even the weakest Manchu Empire, many of them have fought many battles with devils from all over the world?

Uncle Mao, who dared to face the nuclear blackmail of the United States, said NO to the Soviet Union; Uncle Deng, who forcibly forced Britain and Portugal to return the territory, which one is a weak master? Especially Uncle Deng, who attaches great importance to the development of science and technology in the whole country, will definitely not let go of the development of some domestic systems and agree to buy those from other countries.

If you have it, that's what you really have. Look at China, those fighters are so far behind foreign countries, aren't they still being produced? We can't compare in quality, we must use quantity to make up for the lack of quality!

"Xiaoyun, why have you become so eager now? Our system is about to complete the final test, you can take a good rest......" Seeing that Yun Fei stayed in the workshop every day during this time, staring at the test of the LSK9201C1, personally participating in the improvement of parameter settings, adjusting the servo system and improving the control circuit, Qin Qingshan was a little unsightly. Although Yun Fei forcibly took 40% of Huashu's shares, he was very unhappy.

What exactly is this guy stimulating?

"Lao Qin, now this lathe series system is about to complete the test, starting tomorrow, find a way to contact Huadu Daily, from June 1st to promote our system, to let everyone know, we have made China's first CNC system, and can also control the three-axis linkage of the milling machine and machining center......" Yun Fei was outside the workshop, feeling the coolness of the night, highlighting a smoke ring and then said to Qin Qingshan, who looked worried beside him. (To be continued......)

PS: Keep asking for everything......