"If you can really successfully install a rotary table on a three-axis machining center with relatively high precision, wouldn't it become a four-axis machining center? Xiaoyun, are you sure? When Ren Zhiguo heard Yun Fei's words, he was originally frowning and annoyed, but he wrinkled even tighter.

The problem of three-axis linkage of machining center has plagued the CNC machine tool industry in the whole continent, and countless people want to solve it, and have worked hard for many years, but now few companies can successfully solve this problem even with three axes. Not only did China start more than 20 years later than abroad, but its industrial base could not be compared with that of developed countries abroad.

The most important thing is that there are very few experts in this field who are familiar with electronic control. Therefore, there are only a few CNC lathes that can produce two-coordinate CNC lathes in China, and CNC milling machines with three-coordinate can barely be produced, but there is no way to compare those equipment with imported machine tools.

"Who can be sure of this? CNC machine tools are not ordinary machine tools, not only involving mechanical aspects, but also involving electronic aspects, and the most important thing is the processing center of control chips and miniature electronic computers! Does our country have it? Yun Fei also had a headache.

The theory of the four-axis machining center is well known to those who engage in numerical control. However, it is difficult to produce high-precision precision machines based on this theory. CNC machine tools are the embodiment of a country's industrial capacity, especially the most high-end precision CNC equipment, and the processing accuracy, even if it is to improve by 0.01mm, is extremely difficult.

"You kid, it's true, just say what you need, I learned that I told you what you wanted, so I could go back and tell the boss, and let the boss contact the factory with these processing needs to see if it can be provided to you." Ren Zhiguo also agreed with Yun Fei's words, but he was a little unhappy with the demeanor and tone of this kid when he spoke.

Well, you are also a native Chinese, as the saying goes, the child is not ugly, and the dog is not poor. Although the country is not strong in high-precision and cutting-edge science and technology now, at least it is not too bad, right? In comparison, the atomic bombs have been hooked up, the supercomputers have been launched, and many satellites have been launched......

"Senior mechanical transmission engineer, electronic circuit engineer, hydraulic and pneumatic engineer. The most important is the electronic circuit engineer. Also, we have to get people who have a research on small motors, and if you can have all these people, we can start working on rotary tables. That is, the standard PMC shaft drive module is added to the worktable of the three-axis machining center to implement the fourth axis function, so that not only can the order of your four four-axis machining centers be solved, but also such a job of the same type will not be a problem. Yun Fei's answer was a bit professional, which made Wang Qingfeng and Ren Zhiguo feel a little like listening to heaven.

For CNC machining machine tools, especially high-end machine tools, Wang Qingfeng and Ren Zhiguo have no understanding, they have always been curious, Yun Fei is such a small child, where did he learn so many things.

Yun Fei's words are too professional, although Ren Zhiguo can't understand it, he doesn't understand what it means to call a PMC shaft drive module, a motor or something, but for Yun Fei's words that are too professional, he still forced him to write it down. Anyway, it's good to go back and tell the boss like this, and when the time comes, let the boss communicate with the people in the military, whether to provide Yun Fei with people in this regard, and I can't control this.

This time it was so rewarding, not only did he do a good job of completing the tasks assigned to him by the boss, but also made the orders for the four multi-million dollar four-axis linkage machining centers also landed.

Ren Zhiguo was satisfied with this trip, but Wang Qingfeng was entangled. Seeing Ren Zhiguo leave Qingfeng Machinery with joy, Ren Zhiguo didn't even send it.

"Xiaoyun, you said that if we don't take those orders from Kamat, what will happen to our factory?" I don't know how many cigarettes I smoked, the whole ground was full of cigarette butts, and it was almost dark outside, because Wang Qingfeng and a few people had been talking about things in the office, Luo Xiaoli could wait outside boredly.

"I said, old Wang, are you stupid or something? Many people can't ask for orders from Cammat, and you still want to refuse? I know what you're worried about, don't worry, although the order profit of foreign trade processing is very high, but this era of profiteering is coming to an end. Yun Fei was amused by Wang Qingfeng's worries.

During this time, Qingfeng Machinery has developed rapidly with the foreign trade processing business, but with the increasing number of imported CNC machine tools in the mainland market, and more and more foreign CNC manufacturers have established assembly plants in the mainland, it will not be long before the violent era of CNC machining is coming to an end.

In Yunfei's world, CNC machining is not as profitable as general machining. In most processing businesses, the gross profit margin can reach 30%, and the boss of the factory will think that it is more ideal; reaching 50% is the windfall profit of that era; As for the one-double, two-fold, or even several times profiteering business, it's not nothing, but that kind of business, don't count on factories that don't have enough strength to see.

The higher the precision and the higher the complexity of the business, the more profitable it will be. Because the vast majority of people can't do that kind of work, and another is that the higher the degree of precision of machining, the higher the cost of equipment required. In the original era of Yunfei, when the five-axis machining center was already more common in the mainland, the price of an imported German ordinary five-axis machining center was usually more than 5 million yuan, and the price of a large gantry-type five-axis linkage machining center was more than 15 million yuan!

Millions of pieces of equipment, without strong strength, and a stable source of business machinery factories, can only be motivated by these equipment. Although they are jealous of those high-profit businesses, they do not have the courage to spend millions or even tens of millions of dollars to buy a five-axis machining center.

The stainless steel parts business that Qingfeng Machinery relied on was put into the future, and the processing fee could be thousands of yuan, but the thousand yuan of that era could not be compared with the thousand yuan of this era. You must know that in this era, 10,000 households can be regarded as rich, and after 20 years, tens of millions of people will not be considered rich, and tens of millions of people with a net worth can only be regarded as average. After all, a house in any second-tier city costs millions.

It is precisely because of the development of the entire processing industry that Yun Feicai did not feel that there was any difference in the approach of Cammat. Compared with the domestic military, in this era when everything is centered on economic development, it can be regarded as a poor ghost. There is only a small amount of military spending every year, but it has to be distributed to various systems, so those living processing costs are much worse than foreign trade business.

However, in the future, when the competition in the entire industry becomes more and more fierce, many factories in the military have begun to "turn people into the army" and "military to people", which machinery factory can have long-term and stable military business, which one is not making a lot of money?

And the current foreign trade processing orders, the reason why there is such a high processing profit, is mainly that foreign machine tool factories want to use low-end CNC machine tools to open the market in Chinese mainland. As long as many people in China see that the CNC machining business has such a high profit, those who want to become rich first in every possible way, even if they demolish houses and sell tiles, they have to buy a CNC machine tool that costs hundreds of thousands of dollars.

After many people bought CNC machine tools, they found that there were only so many processing businesses in Chinese mainland. If you want to get an order, okay, as long as your price is lower than that of other factories, it will be given to you.

As a result, many people are helpless to find that the profits of the CNC machining industry are getting lower and lower, and more and more people are buying equipment. In the end, if you want to make money, you can only use the volume to overwhelm competitors, so the low-end machine tools of foreign CNC machine tool manufacturers are once again pouring into the Chinese market in large quantities.

It is precisely because the production of CNC machine tools in Chinese mainland is not strong, that foreigners have the opportunity to monopolize the Chinese market with machine tools, and this situation has not improved until Guangshu, Central China, Capital Institute of Mechanical and Electrical Engineering and most traditional ordinary machinery manufacturers enter the CNC machine tool market. At that time, these CNC machine tool companies that competed with foreigners could only compete with foreigners in the low-end field.

Although the cost of domestic production of large-scale heavy-duty CNC machining machine tools is much lower than that of foreign countries, the accuracy is not satisfactory. To know that these large-scale, heavy-duty processing machine tools, the processed parts are several tons, dozens of tons of weight, more than hundreds of tons, not to mention the pre-processing costs of these parts, the cost of raw materials alone, are tens of millions of yuan, or even tens of millions are possible, if the processing accuracy is not reached in a certain place and the entire part is scrapped, then the processing manufacturer will only cry life......

"Xiaoyun, listening to you say this, it's a good thing for the factory that we take over these businesses?" After listening to Yun Fei's analysis of the development trend of the CNC machining industry in the next few years, Wang Qingfeng asked Yun Fei with a suspicious face.

"Of course, in this country, I don't think anyone knows better than me how fierce the competition in the machining industry will be in the future. You see, now more and more brands of CNC machine tools are pouring into the mainland market is an obvious example! Yun Fei's affirmative answer made Wang Qingfeng's heart feel unhappy because of the lack of profits, and his heart improved to a certain extent.

When you are a boss, you have to take a long-term view, right?

"Then let's tell Kamat about it?" Although Wang Qingfeng agreed to Ren Zhiguo's request at first, he agreed very reluctantly. At this time, I heard Yun Fei say that military production is a stable source of profit in the future, so I wanted to call Ren Zhiguo, so as not to have a bad relationship between the two in the future.

"Are you stupid? That's the best, they took advantage of us. Let them feel that they owe us, and when we deal with them in the future, we can fight for more benefits for us, right? "Yun Fei's words are very real. After all, making money from military products is only a matter of the future, after all, the military behind Cammat is indeed taking advantage of Qingfeng Machinery.

For mobile phone users, please read it on m.biquge.info.