Time waits for no man!

Yun Fei is now such a mentality.

As these international situations gradually stabilize, the competition between countries in the development of technology has become more intense. Fierce competition will make the speed of technological upgrading faster. However, many Chinese companies, for various reasons, are not very prominent in the high-tech industry.

However, there are also many enterprises that devote themselves to research in the emerging electronics industry, reserve technology, gradually stabilize the domestic market, and then march into the international market, among which Huawei is the most dazzling example.

However, there are not many companies that can compete with their peers in the international arena, and even in the 21st century, only a few companies can. If the restrictions on private capital are lifted in these industries, their position will be in jeopardy.

Jiuyi Heavy Industry produces CNC machine tools, but has never thought of monopolizing this aspect.

It can't be monopolized at all.

There is a large-scale state-owned factory in China! If Jiuyi Heavy Industry, a private company, is a solo company, it will be cleaned up sooner or later.

Harmony and stability are the development trend of the country!

"Mr. Yun, do you have a rest room here? Old Deng is tired......" The old man's secretary saw that the old man who was still in high spirits was excited, and pulled Yun Fei aside and asked in a low voice.

Yun Fei raised his wrist and looked at the old-fashioned mechanical watch that Ni Lishuang was wearing on his wrist, and found that it was already half past eleven. The next itinerary is the most critical itinerary, the core of Jiuyi Heavy Industry, and what he wants to show the elderly.

Only by letting the elderly see these things can they use their influence to help them win some national research project funds and support policies. During this time, with the launch of more research projects and the continuous deepening of some previous projects, Jiuyi Heavy Industry's monthly investment of millions of research funds has been insufficient, and Yun Fei has now become iron-hearted anyway. I don't plan to think about bank loans.

Obviously, it is a national-level research project, where can it be feasible without the support of some national research funds?

"There's a lounge on the second floor of the lab. Our four-axis CNC machine tool research has not made any breakthroughs, or go directly to the second floor? Yun Fei thought about it and felt that it was time to rest.

After all, the old man is already ninety-one years old, and his energy is not as good as that of a young man.

"What are you muttering? Yun boy, to what extent has your four-axis machining center been studied, and you don't plan to let the old man see it? Seeing Yun Fei and his secretary on the side, muttering something to the side, the old man asked with a smile on his face.

Nor can a few words of national policy be solved.

Moreover, the scope of this influence is very wide.

"Deng Lao, let's go up to the second floor to take a rest first, the research of our four-axis machining center. There haven't been any breakthroughs, and it's not the same as in these labs here. Yun Fei said to the old man.

"What are you talking about, boy? My old man rested very well in the flight and car, and spent more than an hour walking outside every morning, so you only had a little more? Am I old enough to walk a few steps and rest? When Deng Lao heard Yun Fei's words, his face was full of dissatisfaction.

Old children, old children, the older a person gets, the more childlike he becomes. Moreover, do not accept the old. It is the norm for any old man.

Uncle Deng is no exception.

He is more like he is going to live a few more years than anyone else, and he wants to see the return of Xiangjiang and the return of Las Vegas. These two places, which had been ruled by the colonizers for hundreds of years, were all taken back by him. If not to be able to see the return of these two places with your own eyes. In any case, he could not keep a blind eye.

"Elder Deng, let's rest for a while, after eating. The kid will introduce you in detail in a moment, do you think? Yun Fei knew that the old man had to rely on coaxing.

"Okay? You let so many people wait for me to rest? There is nothing to do. I'll just take a look at each other. The old man was unwilling to let so many people wait for him, and insisted on visiting the entire Jiuyi Heavy Industry before resting.

Most of the people in the entire delegation were people from central ministries and commissions who were concerned with the cause of national defense.

In the afternoon, these guys were inspected by the Rongcheng Aircraft Industry Group, which had already set up a project for China's third-generation fighter in the late eighties, but had not made a breakthrough because of the country's backward machining capabilities and backward electronic information technology.

From Germany to get a real sense of the four-axis linkage CNC machine tool, although can not process some large parts on the aircraft, but for the fighter jet on some complex design, processing difficult parts can be fully produced. The design of the 32-bit chip developed by Jiuyi Heavy Industry Co., Ltd. has enabled China, an air hegemon that would have been born until the 21 st century, which has lagged behind foreign countries, to be born many years ahead of schedule.

Just recently, China's third-generation fighter jet has been tested for its first flight!

Otherwise, only by relying on Jiuyi Heavy Industry, an enterprise that produces CNC machine tools, it is far from being able to attract young and strong leaders with real power and young strength, including the elderly, and some parts that are related to the national defense cause to inspect the work.

These people who followed the old man, but none of them were introduced to Jiuyi Heavy Industry, and even the Rongcheng Municipal Party Committee and Municipal Government did not know the specific identity and background of these people, which could not but be said to be a miracle.

It's puzzling.

Yun Fei heard the old man's words and looked at the old man's secretary, only to see that the goods also shook his head and shrugged his shoulders with a helpless expression.

"Deng Lao, this is the research laboratory for some projects of our four-axis machining center. Since the basis of the four-axis CNC machining center is the three-axis machining center, the most important thing in this is to study the integration of the rotary table with the workbench of the three-axis machining center. Sun Lin is the main leader of the entire research and experimental workshop, and when he enters the workshop, he faces the complete sets of products that are placed in countless parts and components, but they are not assembled, and they look very messy, and there are few researchers in the workshop to introduce to everyone.

"You've been doing research experiments for so long, and you haven't even made a prototype?" When the old man saw that there was not even a prototype in this, he couldn't help but be a little puzzled, and it was the same Lieutenant General Cao, who asked Sun Lin.

It stands to reason that at the very least, you should see the kind of simple rotary table that is said to have some four-axis machining center functions for three-axis machining centers.

The report they got was that the improvement experiment of the rotary workbench was also studied and improved in the experimental workshop of Jiuyi Heavy Industry.

"Now our research project team has some big differences in the realization of the function of the fourth axis, and the research of the three-axis machining center occupies a lot of research funds and researchers, so the research of this four-axis machining center is progressing very slowly, and now we have been engaged in theoretical design ......," Sun Lin explained with an old face.

He also wants to quickly get a four-axis machining center out in China, but there is no one, no money, and there is a three-axis machining center that is the most urgent need to improve the design, improve the performance of the project to the market, the project that costs a lot of money and is difficult to see profits in a short period of time, must be shelved first.

It's a lack of people again!

For the second time today, the old man has officially heard the boss of Jiuyi Heavy Industry and the person in charge of the research project ask him that there is a shortage of people. In those state-owned factories, some units even reach the point where even the cleaners are college students, and these private enterprises have put many research projects on hold because of the state's talent policy.

Money, too, is a major issue.

There are a lot of state-owned machine tool manufacturers in China, and every year those machine tool factories report CNC machine tool research projects to the state to apply for a lot of research funds, but rarely used for their own research, they are more willing to allocate the money from the state finance, used to introduce foreign technology.

Spent a lot of national research funds, only got some foreign backward technology, really made China's advanced CNC machine tool technology of private enterprises, but because of the lack of research funds have to use limited resources to be able to push the market faster for the return of funds to the lower level of technology research.

How difficult it is for private companies to make progress in scientific research can be seen from these research projects of Jiuyi Heavy Industry.

Hearing Sun Lin say this, the old man turned his unkind gaze towards some of the people who were following him.

"Since you are short of people and money, why don't you cooperate with our large machine tool factories?" I don't know what Lieutenant General Lu Daocao does specifically, but he can always grasp the key point in short language.

In this regard, most companies often seek to cooperate with large national factories.

"Hehe, working with them? How can large enterprises with sufficient research funds every year and no pressure to survive be able to look down on these research projects in the hands of small enterprises like us? Besides, many companies are engaged in these projects, and they simply don't look down on the research capabilities of our private enterprise! To the question of this lieutenant general who did not know the specific identity of Lu Dao, Yun Fei replied with a sneer.

At the beginning, many state-owned machinery factories wanted to unite to share the production technology of CNC lathes with the requirements of Jiuyi Heavy Industry, but they were blocked by those big families in Beijing with the idea of Jiuyi Heavy Industry. (To be continued......)

PS: Thank you for the good money and a big reward. Thanks to ACmilan1 for the big commuter pass.

Brothers, where is your support?

Do you dare to give the gourd more power?