It's not that Deng Lanqing bragged, she has also been to a lot of research institutes in China, unless it is a military research institute with a very high level of secrecy, she has not been there, and there are really few other scientific research institutes and the environment can compare to the Jiuyi Research Institute, a private research institute that uses money to pile up.

Jiuyi Research Institute has a huge investment in scientific research every year, and a large part of these funds are used for the addition and transformation of hardware facilities and the upgrading of software facilities. This is also the work that Deng Lanqing has been presiding over since he took office in the past few years.

The institute needs modern management, and more importantly, modern construction.

The Jiuyi Research Institute is not as good as those scientific research institutes in the state, and when working on any project, it can apply to the higher authorities for the deployment of manpower or material resources of the whole country. For this institute to produce results, all employees must work together. Yun Fei, the boss, does his best to ensure the supply of funds for the research institute, hardware facilities or something, if there is no domestic equipment, look for it from abroad, and if it is not open to China, he will find a way to purchase it from foreign smuggling forces or teams, and when it is really impossible, he will design and manufacture it himself.

This research institute has invested more than five billion yuan in the past few years, and if it still doesn't work, Yun Fei's money will really be wasted.

"I'm not talking about sanitation or anything. The grassroots management of our entire group company should be very good, if there is a problem in the research institute, this is okay? Yun Fei looked at the woman in front of him with a painful face.

Needless to say, the researchers themselves will cherish it very much, and after every day they are used up, there will be those graduate students of Rongcheng University who have just entered the research institute or interned in the research institute to clean and clean.

If you want to really learn something, you must first do it well from the most basic place.

This is the habit of the entire Yunshi Holding Group, and it is also the tradition of the entire Yunshi Holdings. In fact, this is also the tradition of the machinery industry in China.

Apprentices, if you want to learn real skills. First of all, we have to start with the basics. What is the most basic? That's the maintenance equipment. In this regard, the whole world is not as good as these skilled workers and researchers in China before the 80s, because no one understands better than them how difficult these equipment are.

"So what do you want to ask? If nothing else, you'll just wander around the institute by yourself, and I'll have a lot of things going on here. At present, our five-axis linkage technology can begin to develop in the horizontal direction, and our first five-axis linkage CNC grinder is starting the trial production of samples in the past few days...... "Deng Lanqing can not care about Yun Fei is the boss."

looked like the old lady was very busy, and the demeanor of what you like to do made Yun Fei surprised.

Although he had always hoped that Deng Lanqing would not take what happened at the beginning as a thing, when the other party was really like this, he felt a little uncomfortable.

Perhaps this is the most direct expression of the fact that all human beings are lowly creatures? Others are not like this, and they don't know. But he himself seems to be like that. Deng Lanqing's attitude made him feel very hurt.

Injuries are injuries, and as soon as he heard Deng Lanqing say that their five-axis linkage CNC grinding center had begun the trial production of samples, Yun Fei suddenly couldn't care about anything else. Suddenly asked in surprise: "Our five-axis grinding center has started trial production?" When was the project initiated? Do you have an order? ”

It's not as popular as a machining center.

The five-axis linkage CNC grinding center is not as popular as the machining center, which is also the most technically difficult and complex CNC machine tool in the world. If it is to be strictly classified, this can be regarded as an industrial machine in the real sense.

In this era, and even in the next decade, only three countries, Germany, the United States, and Japan, can produce it.

The most sophisticated manufacturing in the machining industry will never be possible without this grinding equipment.

China once did not have such equipment. Even brandishing a lot of money to buy from the world is not an impossible thing. Without such equipment, conventional grinding methods can only be used in the most important tool processing industries. Not only is the processing efficiency low, but the processing quality is also very unstable.

Rongcheng's Chengliang Group once wanted to buy a five-axis linkage grinding center from the German Dirk company for 40 million US dollars, but no one sold it!

"It's a shame that you're still the boss, and you don't even remember such an important project. You signed the project application at the beginning. It was last year. There was a time when you were listless in what you did. Chengliang Group's order, 42 million units! They ordered a total of three! Deng Lanqing said with a smile on her face.

The price of this stuff is really not affordable for the average small company.

And, even if it comes out. There will not be many knife companies in the country that can afford it. This is many times more expensive than ordinary five-axis machining centers, because the R&D cost cannot be diluted due to sales problems. The initial order of these three units is likely to be not enough even for R & D costs.

Jiuyi Heavy Industry produced it, and each one had to lose a lot.

The specific amount of loss needs to be known until it is fully researched and delivered to the Chengliang Group for use.

No one cares about such losses, because the more they produce, the smaller the loss will be, and as long as the number of production exceeds twenty units, they will have a considerable profit. I think that this kind of professional-grade machine Q� equipment that completely belongs to the category of ultra-precision machining, there are not many users in the whole world, and there will not be too many competitors.

"The price is so high?" Although Yun Fei knew that the price of this thing was high, he didn't expect that the other party would place an order with them before they even had a five-axis CNC system.

At that time, it seemed that Mao Laosi had not been pregnant for a long time, and several women made him miserable, and the days when the incident with Wang Zixin had passed for almost a year and a half, if it were not for the successful technical research of their five-axis CNC machine tools, there would be no way for such precision equipment.

"Is it high? Renjia Chengliang Group negotiated with Dirk Company, and has been negotiating since 95 years, and the precision process is not high, and they directly ask for 18 million US dollars! And the price of their equipment in the European and American markets is only about four million US dollars......" Deng Lanqing said this, and his face was painful.

"Who told us not to have it? Since there is none, then it must be slaughtered by others, right? What of our research equipment, such as ion implanters, has not been purchased at twice or three times the price abroad? Yun Fei was an egg ache when he said this, "What kind of journey has the prototype arrived?" Why didn't I hear it the first few times I came here, how about taking me to see it? ”

This is exciting news.

In the past, they developed their own first, but now it is different, and it is completely possible to let all projects be researched after having market orders according to market needs.

Modern production enterprises must take this path.

The turn of the twentieth century and the twenty-first century is the most critical time when the market is changing dramatically to a made-to-order market.

If Yunshi Holdings wants to maintain such rapid development, it must adopt such a model.

Even, Yunfei can also take this opportunity to make the entire company's production model begin to change to this. Of course, this is not the case with consumer electronics. Because of this thing, she has to constantly innovate in order to maintain market sales, and if there is a slight difference, there will be problems.

"What are you anxious about? That's when the order begins. Although this project has been following the progress of five-axis linkage research, it is more complex than a five-axis machining center with tool machining. Deng Lanqing glanced at Yun Fei.

"I thought I was already starting to assemble the heavy parts of the prototype!" Yun Feibai was happy, if the trial production of the prototype was started, the old man would be even happier when he came here tomorrow. Although this thing is a niche, some of the top parts production is inseparable from this.

"You think it's so fast? If we could really be so fast, with our R&D speed, we would have already caught up with the United States and Germany, and at this time, we might be on a par with Germany. There are almost two years left before the original delivery deadline! Deng Lanqing's face was in pain.

In the area of numerical control technology, the Chinese have no other way to go except to catch up.

Although the United States is a manufacturing power, they were the first to come up with CNC machine tools, but they were caught up by the Japanese and Germans who came later, and even surpassed. Germany has always been a well-deserved scientific and technological power.

Mechanical, electronic, computer, and other technologies are far beyond the United States. If they hadn't been suppressed after World War II, and if they hadn't been able to compare with the Americans in terms of resources and talents, this number one power would definitely not be the United States.

"Can't you think about it?" Yun Fei naturally knew this, "Rome was not built in a day. Germany surpassed the United States and Japan to become the world's first scientific and technological power, and Made in Germany is the guarantee of their quality and technology, which can not be done in a short time. We just have to work in this direction. Okay, you go and get busy with yours, I'll take a look at the flexible automatic workshop project. ”

At this time, the entire research institute is very busy, although it is said that the old man may come here tomorrow, but for those grassroots researchers and workers in the real workshop, they don't know the news at all. (To be continued......)

PS: Thank you to all the brothers who voted for the monthly ticket, the gourd is in my hometown these days, and I can't thank them one by one.