"It looks like an avalanche has landed, and we're going to speed it up."

As he spoke, Li Yifan took Ashin and Ah Xiong to speed up and walked towards the production workshop behind.

Ah Xiong and Ah Xin also have a dignified face, they are in the building, not in the open area outside, and they can't see the damage to the building caused by the avalanche outside, it stands to reason that everyone should go to the open area outside to hide for safety at this time, but now the boss wants to go to the back to pick up the cheap, what can they do? can only follow the past, after all, they all know the truth of wealth and danger.

The trio soon moved into the back production room, the first of which was dedicated to the production of Nikon's flagship high-end cameras.

In fact, the most valuable thing of these cameras is the lens, and the other is the electronic sensor inside, that is, the high-end CCD or high-end CMOS.

Although Li Yifan is also salivating for the equipment in it, after all, it is impossible for these equipment to be removed in such a short period of time, so he can only look at it and drool.

Before entering the production workshop, the first thing to enter is the dust removal room, which was originally required to be strictly required for foreign visitors, but now there is no need for it, and several people swaggered through the dust removal room, and then entered the core area of the Nikon factory, the production and processing workshop.

The first workshop is dedicated to the production of some cameras or mechanical parts, and you can see many large CNC machining centers, which are placed in the workshop. There are about fifty or sixty samples. At first glance, they are all high-end goods. Neatly and neatly cared for, Li Yifan glanced at the nameplates of these machine tools, many of which were high-end goods from Fanuc and Mazak, which were difficult to buy outside.

He was very moved, but he could only swallow his saliva, these machine tools are not small, and they are all precision goods. The requirements for installation and dismantling were so high that it was impossible for them to take these machining centers with them today.

In the back of a workshop is dedicated to the production of electronic robots, this is where Nikon produces robots for Honda, which is also what he only knew when he saw the introduction of the exhibition hall in front of him, it turns out that Nikon is still able to produce robots, just these are the saliva that is about to hang on his chest.

This is high-end manufacturing, but it's a pity that he can't take these things away, so he can only watch those assembly lines swallow saliva, but this does not prevent him from collecting intelligence.

The layout of the production line. There are also mechanical nameplates on various production lines, as well as the names of the machines. And so on, all of which he filmed with a digital camera.

Although he couldn't get these mechanical equipment, as long as he could know the details of this, these materials alone were worth ten thousand gold.

You must know that even if you want to set up a machining center, how to lay it out, what kind of machinery to use, how to not only the production line, etc., these are all headaches, especially for a poor beginner like him, if you don't have a three or five years of exploration, you yourself can't figure out the doorway here.

And these so-called doorways are experience, and such experience, those German and Japanese machinery manufacturing enterprises, people will not tell you at all.

And even if you want to spend money to learn from others, people will not tell you, after all, how to lay out the production line, which everyone has spent many years to find out the experience, but don't underestimate the placement of these machinery or something, maybe it's just a simple layout, you can make Zuihou's production efficiency and yield rate, get more than 10% improvement, this is the experience!

In his last life, Li Yifan also followed some equipment production departments under the domestic assembly to go abroad for inspection, nominally to buy foreign machinery production lines, in fact, the main purpose is to enter other people's production workshops to steal teachers, but for such a sensitive part of the production workshop, foreigners are also staring at it, they don't want to go in to steal teachers, it is difficult to take a look from afar, people will only lead them to go around in an inconsequential place, At that time, the people who had the same purpose as him were in a hurry.

I didn't expect to arrive at Nikon's factory today, it was like entering Baoshan, and no one cared about it at all, so it was not easy to use it.

Three people and three cameras, took pictures of the two production workshops, and then rummaged through the offices in these production workshops, found a lot of production manuals, and put them all in their pockets.

Don't underestimate the production manuals of these oil stains, this thing is equivalent to the martial arts cheats of the past, which has detailed regulations, the process when producing various different parts, how you should do it, how to supervise workers, and so on.

If the previous layout of the production line and the use of machinery are experience, then these production manuals are also valuable experience, and the previous experience is for machinery, and these experiences are for workers.

These are all treasures, and then they enter the third production workshop, the third production workshop, which produces microscopes and lenses, and here is the core Jishu lot of Nikon.

Just by looking at the door of the workshop, you can know the importance of this, because the big iron door of this workshop is much thicker than the iron door of the first two workshops, if it were not for the workers who ran out in a panic and forgot to close the door, it was not easy for them to get in.

A few people took another wild shot, and the situation of the production line was all recorded, and then they found the raw tea manual, and Zuihou Li Yifan also took a few small high-end microscopes, you must know that the Japanese are experts in this area, and these things are to be studied when they go back.

Those production manuals are good things, and the production process in them is definitely a haode thing, because it records the sequence steps of producing many specifications of microscopes, as well as a series of information such as the required error accuracy, which is equivalent to printing a booklet to tell you how to make these microscopes, what could be better than this?

The fourth workshop is dedicated to the production of other parts of digital cameras, and Li Yifan also took photos and records, and then looked for production manuals.

Then we moved on to the fifth workshop, which is the top priority for Nikon, where it specializes in the production of high-end CCD and CMOS sensing components, which are high-precision electronic photosensitive devices.

To put it bluntly, it is an electronic chip, these things can be said to be the unique work of the Japanese, except for the Germans, there is really no other country that can compete with them.

Li Yifan asked Ah Xiong and Ah Xin to record and take pictures, while he himself came to the front of the lithography machines that produced chips, carefully took a large number of them, and then recorded the model of the machine, and then put a few packaged haode chips into his arms, and then went to find the production manual.

After Ah Xiong and Ah Xin finished their work, he reluctantly led the two of them into the sixth workshop below.

The sixth workshop is the final assembly workshop, where the parts of the microscope or digital camera produced in front of it will be transported to this workshop by conveyor belt, and then assembled after special treatment.

After a few people recorded the layout of the production line and the machinery used in the workshop, they began to look for the production manual.

When the production manual was recruited, Li Yifan was also taken aback, no wonder people in Japan can achieve such a high attainment in the field of optoelectronics, just looking at the strict production standards of others, you can see how hard people are.

After entering this workshop, all the components of the camera must first be immersed in a special liquid to remove dust, and he hurriedly asked Ah Xiong to find this liquid tank, and then packed two bottles to take back for research.

Then before the final assembly, people's sensors before the final assembly, but also under the microscope manual dusting, this microscope is a special microscope, the resolution accuracy is particularly high, even the use of the light is a very special ultraviolet lamp, any more than five microns of dust on the sensor must be removed, this shows people's intentions, no wonder people in the field of optoelectronics can take the lead, just this intention, is not what we can compare.

This time can be regarded as an eye-opener for Li Yifan, and he finally knew the secrets inside the factory, understood the rules and regulations of others, and the production process.

Otherwise, after he returns to China, even if he starts the same company, even if he has jishu and mechanical equipment, but if he wants to reach such a height, I am afraid that it will be completely impossible without a few years or even more than ten years of effort.

This time, it can be regarded as the right one, entering Baoshan, and finally did not return empty-handed.

Even if you don't get those machines today, it's enough to get these materials and the internal situation of the factory.

Coming out of the sixth workshop, they entered the seventh workshop of Zuihou one, which is a newly built haode workshop, and the machinery and equipment in it are very new.

Several people also recorded it, and then turned out the production manual from the office of the workshop, when they saw the introduction of the production manual, Li Yifan's heart was about to jump out of his throat......

However, the installation and commissioning have not yet been completed, and now it is just some simple equipment installed, and there are many high-precision production machine tools, which have not yet been installed...... (To be continued......)