After the security guard took Yang Guang and Zhou Bin out of the office, Yun Fei's whole body strength was drained, and he collapsed weakly on the chair.

Human desires are too difficult to grasp. Zhou Bin and Yang Guang have an annual salary of more than 80,000 yuan, but they are still not satisfied. The simultaneous betrayal of the two people in Xin Kaixing who made Yun Fei take the most fancy made Yun Fei very puzzled, except for work, there was no connection, who connected them?

In the middle, there will definitely be an element of interest, but it is definitely not the main one. Otherwise, the current vice president of Rongcheng Jiuyi Heavy Industry should be Yang Guang, not Wu Zhongda. However, this may also be a matter of Yang Guang's vision, what is it, only Yang Guang can tell Yun Fei.

"Brother Yun Fei......" Seeing Yun Fei's appearance, Ni Lishuang didn't know whether Lu Dao should comfort him, or ask Yun Fei and let him answer the doubts in his heart.

"Frost, don't worry, I'm fine. It seems that there is no way for us to go back to Rongcheng in a short time, you go and call Mao Laosi, inform Wu Zhongda, and tell him about the situation on our side......" Yun Fei saw the worry on Ni Lishuang's face, and squeezed out a smile.

Xin Kaixing appeared in the current situation, all of this, it can be said, is caused by Yun Fei himself. His presence gave the factory director a high degree of centralized power, and after leaving, he did not take measures to restrict the rights of the factory director because of his simple belief in one person. In the past year, because of Jiuyi Heavy Industry, he didn't even go to Huadu at the end of last year, and even if he received Xin Kaixing's financial statements, he only took a slight look and put them aside.

Wang Qingfeng, the largest shareholder, was also implicated by Rongcheng Xinkaixing, and many times he traveled between Rongcheng and Shancheng, and at the end of the year, he had to go back to his hometown in the Northeast to accompany his family, especially Zhang Rui, who gave birth to a daughter to him, was in the Northeast. His daughter and Zhang Rui are on the same page, and Wang Qingfeng simply does not have enough time and energy to manage Xin Kaixing. When you get used to the shopkeeper, where can you bow down like when Yun Fei was not there before? Xin Kaixing has a group of his old brothers to guard, and he doesn't think anything will go wrong.

"Brother Yunfei, those CNC lathes are no different from the CNC lathes we produce, how did you find out?" Yun Fei just called Wu Jianguo and Yang Dezhi back, lit a cigarette and thought about where to find professional managers to manage Xin Kaixing, Ni Lishuang asked the doubts in her heart, she really couldn't hold back.

"Frost, you're not in this business. So in your eyes, these beds are no different from the CNC lathes we produce. If you just look at it from the outside, you can't see it, and I can't even see it. The CNC lathes we produce, except for the ball screw, are produced by ourselves, and other key accessories are also imported, and the machine tools are not opened. I can't see it at all! Yun Fei explained to Ni Lishuang.

If he wasn't here, Wang Qingfeng, who didn't know much about CNC machine tools, wouldn't have found the greasy in it.

"And how do you see that?" Ni Lishuang was puzzled, Yun Fei couldn't see it himself. So how did he find out that the CNC lathe in that workshop was not produced by Jiuyi Heavy Industry?

"If Yang Guang said that these equipment are idle because the processing business is not full, I will not touch those equipment, most of the precision machining business of Xin Kaixing. It is through the processing of foreign trade parts and the precision machining products of the military that Camart has in his hands, and most of them are the businesses that I talked about when I was the deputy director of this factory. He knew that I knew, so he could only answer me that the equipment was all faulty. Yun Fei's face gradually returned to normal.

If he returned to the factory this time, he didn't see that the few people he had placed in the entire factory were gone, and the entire production workshop was completely lacking in management, Yun Fei would not have thought that Zhou Bin and Yang Guang could join forces to steal and sell the mid-range CNC lathe transferred by the company's Jiuyi Heavy Industry. These lathes are all mid-range lathes with top-of-the-line configurations, and the price is more than 170,000 yuan in the market!

"In addition to a few factories in China with Huadu CNC dragon CNC system, many are imported from Japan FANUC system or Germany imported Siemens system, since they want to imitate the CNC lathe of Jiuyi Heavy Industry, people can not see the problem, so they can only use the dragon CNC system produced by Huadu CNC. But they don't know that the most critical place of Jiuyi Heavy Industry's CNC lathe is actually on the system. ”

The CNC lathe of Jiuyi Heavy Industry, which replaces the eight-bit chip with a 32-bit chip, has only very slight differences in the start-up interface and operation interface, and it is not particularly professional that it cannot be found at all. Because of the transformed system, all the control codes, programming formats, and tool setting methods are no different from Dragon CNC.

The system modified by Jiuyi Heavy Industry is very different in the parameter setting of the machine tool.

The parameters of the machine tool in the CNC system, in addition to the CNC system manufacturer set a part, some of the most machine tool parameters, such as the mechanical origin, the maximum speed limit of the machine tool, the maximum moving speed control of these parameters, are set by the machine tool manufacturer. To access these parameter setting interfaces, it is simply impossible to obtain the password if you are not a key technician of the machine tool manufacturer.

The parameters set by the machine tool are the ultimate killer feature of CNC machine tool manufacturers. If there is a problem with the parameter setting, the machine tool manufacturer would rather spend a higher cost and send professional parameter setting personnel from the company to the customer's workshop, and will not tell the customer the password to enter the most basic parameter setting interface. The more high-end CNC machine tools, the more high-precision CNC machine tools, the more important those parameters are.

These parameters have been explored after countless tests.

A large part of the setting parameters of the dragon CNC system are provided by Yunfei, and the debugging of the CNC lathe of Jiuyi Heavy Industry is also carried out by Yunfei himself. When the system is turned on, as soon as the machine is running, you can know where the problem is.

"The maintenance of CNC machine tools, in many cases, has to involve the modification of parameters. Opened the machine tool, I found that there is no problem with the system, after entering the parameter page, I found that these systems are not ours, and when I looked at the end of the guide rail, I found that there was no special number of our 91 Heavy Industry. That's the case, I found out that these CNC lathes are not our Jiuyi Heavy Industry, but the CNC lathes produced by those factories outside, in terms of machining accuracy, there is no way to compare with the machine tools we produce, Xin Kaixing's main business of machining, either military products, or German IDG, EMG company's foreign trade workpieces, and some processing parts from the United States, these companies' business, not only high precision requirements, appearance quality is also high. The CNC machine tools produced by other domestic machine tool factories cannot make these parts at all! Buy imported CNC lathes that can do these jobs, even if they are second-hand, they have to be more than 150,000 yuan, we can now produce such equipment, why do we want others to make our money in vain? Yun Fei pondered the whereabouts of the batch of CNC lathes and explained to Ni Lishuang.

For CNC machining, Ni Lishuang doesn't know much, and after listening to Yun Fei's words, she still seems to understand.

"Brother Yunfei, if you say so, how did the company's business be completed?" Ni Lishuang grasped the point.

Xin Kaixing was originally able to do IDG, EMG these companies in terms of tooling foreign trade products CNC lathes are not many, otherwise, Yunfei will not be in the market demand is extremely huge, but also from the monthly output of 200 units to Xin Kaixing 20 units.

"That's another question. Now the profits of the foreign trade processing business of the CNC industry are far higher than the profits of domestic machining, especially the difficult and high-precision business, and the profits are higher. In two years, Xin Kaixing has developed from a small factory with only thirty or forty ordinary machine tools and sixty or seventy people to more than 400 people in the machining workshop, close to the extent of 100 CNC machine tools, all because of the CNC machining business. When it was still Qingfeng Machinery, the first batch of stainless steel thin-walled parts we made, aside from the cost of machine tools, the labor cost was only less than one hundred and fifteen, and the processing cost of each product was more than 1,000, and there were dozens of kilograms of stainless steel chips also had to be hundreds of dollars, how much profit do you say? Since they replaced these CNC machine tools with some garbage CNC machine tools, they will definitely take these processing businesses to the processing plant of that batch of equipment. Under the full start, in less than half a year, the cost of the machine tool will come back! "Yun Fei knows too much about the cats in the middle.

"They're borrowing chickens to lay eggs!" Hearing Yun Fei say this, Ni Lishuang finally understood.

Zhou Bin they put these advanced equipment outside, and then buy some equipment with low precision from the outside, Xin Kaixing will definitely not be able to produce products that meet customer requirements, the company wants to deliver during the period required by customers, then it is necessary to outsource these products to a processing plant with strong processing capacity.

"And that's what they did for those machining centers?" Ni Lishuang finally understood, in order to find out what Yunfei had to go to Kamat to copy the list of equipment transactions between Kamat and Xin Kaixing in the past year.

Since Zhou Bin and the others even dared to replace the CNC lathes generated by Jiuyi Heavy Industry themselves, the new machining center they bought would definitely be replaced by some of them. In this way, they will be able to get more processing business transferred through Kamat, and in a short period of time, their profits will exceed that of Hinkaixing. Because of these equipment, Xinkaixing has been reduced to their rough processing factory. (To be continued......)

PS: Thank you to the qualified readers, Vigo's war, and the tips of several brothers on Tianya Reef......