"Equipment numerical control, is the inevitable trend of the development of China's equipment manufacturing industry, now in addition to those state-owned enterprises, research, manufacturing, sales of private enterprises can be said to be no. If all our equipment is bought from foreign second-hand equipment or simple CNC control, the cost is not only too high, but also not conducive to our future development. ”

Due to the limitations of his own times, although Wang Qingfeng can predict the prospects of the CNC machining industry, he has no idea about the most critical CNC system of CNC machine tools.

"Alas, I said, Xiaoyun, you are a little hairy child, for what can you know so much, during this time when I was outside, I also heard a lot, I heard from friends, just two months ago, Luogang set up a CNC equipment company, they are mainly the production of CNC systems, we can directly buy their CNC machine tools in the future......"

"What? Wide number? Is their name called Guangzhou CNC Equipment Co., Ltd.? Wang Qingfeng's words made Yun Fei think of the company that in his own time, it was divided into three parts of the world with Japan's Farak and Germany's Siemens, occupying half of the domestic CNC system.

However, although it has a three-legged relationship with Farak and Siemens, the market share of the vast number is all piled up by the number of low-end systems. High-end CNC systems are monopolized by foreign companies, and others sell high-end systems, and they have to buy hundreds or even thousands of sets.

The lack of localized high-end systems is an eternal pain in the hearts of all robots in China! Especially those senior technicians, who use an all-English system, how can they be happy! Who called the country a late start and a weak foundation! In the mid-nineties, there was no mechatronics major.

To know that the main problem of the CNC system is to combine the two mechanics and electronics. There are a lot of mechanical talents, but there are a few talents in electronics who can't find a few lanterns, and even if there are, they are not enough for state-owned factories, where do private enterprises find these electronic engineers?

"Yes, but now there are only more than 20 people, not as good as our company, originally I planned to go to their company after a while, if appropriate, order a few CNC machine tools." Wang Qingfeng was a little curious, Yun Fei was such a small child, it turned out that he was in Shenzhen, how did he know about such a small company in Ludao?

Hearing Wang Qingfeng's words, Yun Fei couldn't help but think of the information about the company he knew.

Although Guangzhou CNC has a lot of registered capital, it is now only a small district factory with more than 20 people, and the CNC system produced is also an imitation of foreign systems. However, although there are few people, the output value is not lower than that of Qingfeng Machinery Factory, to know that this year, a set of CNC system to get twenty or thirty thousand, and an ordinary machine tool industry is not much different.

"Lao Wang, let's also engage in CNC systems, right? What do you think? "Thinking of the prospect of the CNC industry, as well as the future market in the land of China, such a big pie, if you don't pounce on it and take a bite, it is difficult to eliminate the hatred in your heart.

If you don't eat this cake, at least within ten years, most of the profits of the CNC industry will be earned by foreigners.

"Forget it, brother, let's do processing in a down-to-earth manner, by the way, brother, didn't you say that you want to talk to me about the management of our factory or something, anyway, it's off work now, let's go to the small shop next to us to drink and chat, I will call a few people in charge of the factory." Hearing that Yun Fei asked him to invest in the direction of CNC, Wang Qingfeng hurriedly changed the topic.

In recent years, there are many people who want to engage in CNC in China, most of them have lost their money, or they have opened a small factory to imitate the lowest-end system of the Germans or Japanese.

It is the small factory that has just been built in Luogang, and I heard that millions of yuan have been invested. NND, millions of yuan can buy hundreds of ordinary machine tools, if the business is full, it will be hundreds of thousands a month. In case the CNC system can't be done, it will be a loss, and there is no room to turn over.

Although he has seen the machining skills mastered by Yun Fei, and he is also very skilled in operating CNC machine tools, Wang Qingfeng does not think that Yun Fei can get the CNC system back. No matter how talented Yun Fei is, after all, his age is here, if such a hairy kid has figured out the CNC system, how can the engineers who have not even figured out the direction for several years be embarrassed!

Originally, he just said it casually, but when he heard Wang Qingfeng's answer and saw his reaction again, Yun Fei didn't feel a good feeling in his heart. If you think about it, this is also human nature. He has been in contact with Wang Qingfeng for less than a month, and on the surface, he seems to have more trust in himself, if he is allowed to gamble on a sixteen-year-old young man like himself, no one will be such a fool.

After all, his current body looks like he is only sixteen years old, although he can believe that he is an engineer studying mechatronics in the next generation?

For the more commonly used CNC system in China, Yunfei is still very familiar, if the ten years later those Farak and Siemens systems come out, it can fully occupy the high-end market of this era.

Since Wang Qingfeng is unwilling to do this, it seems that he can only wait for the opportunity, and after he has the money, he will go out and go alone.

When he thought of money, Yun Fei thought of the first CNC system developed by Guangzhou CNC - GSK928, for which he had an in-depth understanding when he was in school. There are very heavy traces of Falac, but compared with the traces of Farak traces of various series of KND products launched in Beijing Third Mechanical and Electrical Research Institute, it can also be regarded as a localized product. In this era, it's not bad.

Due to the limitation of industrial control chips, although the GSK928 system has a small storage space (24k, 100 programs), slow moving speed (fast moving 15000mm/min, straight line 6000mm/min, arc 3000mm/min), no macro program function, no thread gap compensation, less sub-program call and no electronic gear function, screw rods, drivers, encoders and even machine tool structures are limited by the system, and its low price (a complete set only needs more than 10,000, Less than 20,000) for the market domestic CNC system is almost a blank China, or quite a good system, at least, can meet the processing of some more complex parts.

The most criticized thing about the GSK928 system is not that the system itself has many defects, but that it uses a stepper motor instead of a later servo motor.

Anyway, GSK928 will not be developed until August next year, so Yun Fei is not in a hurry. Wait for this period of time to straighten out the affairs of Qingfeng Machinery, go to Luogang for a trip, if you can obtain a wide number of shares with the skills in your hands, it is ideal, even if you can't, you have to use this system to get your own starting funds.

In the evening, Wang Qingfeng took the leaders of several departments in the factory to sit at a large table in the small restaurant next to the factory. To be honest, Yun Fei has been in Qingfeng Machinery for so long, and it is the first time he has eaten with the leadership of the entire factory.

He himself is a person who is not good at socializing, and he also knows that in these years, although the eating and drinking style is also more serious, but in the factory, it is still relatively simple. Wang Qingfeng, who works alone in Guangzhou, usually deals with it in the canteen like a worker.

Although Yun Fei is not good at socializing, the amount of alcohol is still good, and after a few glasses of beer, he will call the heads of various departments brothers. However, as long as he mentioned the company's management, not only the heads of various departments diverted from the topic and were reluctant to mention it, but even Wang Qingfeng was unwilling to talk about this matter.

This meal made Yun Fei depressed. I was in a bad mood, and after a while, I was a little dizzy, and I left the small restaurant after apologizing to the people who were in the mood, and wanted to take a walk outside.

For mobile phone users, please read it on m.biquge.info.