"What else can I do if I don't?" Hearing the old man's unfinished words, Yun Fei couldn't cry or laugh.

Does this old man think that this is the aunt of the vegetable market scolding and fighting!

"Old man, let's go, let's go to the area of the five-axis machining center in front of us, even if they want to debate or something, they can find another time." Otherwise, it will delay everyone's time......" Deng Lanqing has always cared less about these officials than Yun Fei.

The old man came here, if it weren't for Yun Feiqian's advice, she wouldn't have acted as this commentator at all. For her, with all this time, it is better to spend it on the research of the machine, and then maybe she will come up with a Transformer.

"Yes, Dad, it's not too early now...... "People always change in the direction of children as they get older. The old man's current appearance is not the former national leader at all, just an ordinary old man who is full of curiosity.

Seeing that there was no good show to watch, there was no quarrel, and the old man could only clean up the mood of watching the excitement.

"Yun Fei, where did you dig this guy from?" Luo Feng, a middle-aged man, left a very deep impression on the old man, and this guy can at least be regarded as a talent in the eyes of the old man. Yun Fei's Jiuyi Research Institute naturally cannot cultivate such a talent in a short period of time. What's more, Yun Fei is really very criticized for digging people's corners.

Seeing the old man's smiling eyes, Yun Fei glared fiercely at the old man who said that his company was poaching people everywhere, and then explained to the old man with a smile: "Old man, you can wronged me for this." Luo Feng was originally just an ordinary CNC technician in the 132 factory, and the benefits of the 132 factory in the past few years were not good? That guy Huang Qiaosong keeps borrowing money from us. It was very difficult to recover the money from his side, and after we didn't borrow people, he began to trade with us with some of the people we needed and their idleness. It's this guy, he offered to sell it to me for a million......"

Dead friends do not die poor.

Anyway, Huang Qiaosong's old thing is about to retire now. It's just that he is shameless and always reluctant to retreat from his position, even if he does something, the old man will not do anything to him. It's yourself, if you sue the old man to dig people to the 132 factory, it's a strange thing to be able to make yourself better.

The J-10 of the 132 factory has already begun to be produced in small quantities, and it will soon be installed in the troops.

What is J-10? That's the sword of the nation!

If Huang Qiaosong's shameless old thing met the old man, he said that officially because Yun Fei was always digging their corners, the progress of various studies was very slow, and more research funds were consumed. This consequence is not something that Yun Fei can afford. Don't doubt that Huang Qiaosong's old thing wouldn't do such a thing, because Yun Fei wants to engage in aircraft engines, and those old men in the 611 Institute have now become Yun Fei's most coveted objects.

"So, this Luo Feng is just a liar, not worth a million?" The old man asked Yun Fei suspiciously. In his impression, Yun Fei never seemed to suffer such a big loss, otherwise he would have hit the door a long time ago.

"Not really. Luo Feng's value is not measured by money. I don't know how his brain is structured, this guy is basically mechanical, electronic. Computers are very proficient in these technologies related to mechanical automation. Otherwise, he would not have come up with such a project. Of course, the purpose of this project is not to study perpetual motion machines, but to study related mechanical technology and energy technology in this research process. At that time, there are many related projects that can be extended. For example, the hydrogen-powered engine technology of new energy, such as the technology of energy efficiency improvement, precision machinery manufacturing, automatic control, etc......., "Can the current Luofeng be measured by price?"

No.

Originally. Sun Lin and Situ Heyun were ready to let Luo Feng take over the responsibilities of the dean of the research institute, but this middle-aged man had rarely engaged in research before, although his talent was strong. But the foundation is not very good, if it weren't for Yun Fei's arrangement for Luo Feng to study in any project team in the research institute, they would not have discovered Luo Feng's talent.

And Luo Feng himself is not willing to do management.

"So, you still take advantage of Factory 132?" The old man stared at Yun Fei with dissatisfaction on his face.

"Well, you can't say that. At least when I got him back from the 132 factory, he was only able to be an ordinary mechanical engineer, the most attractive thing about our company is that it can give everyone a stage to play, how big his heart is, how big the stage we can give him...... "Yun Fei is bragging here."

This also confirms the difference between Yunshi Holdings and other companies from the side.

As soon as the old man heard Yun Fei's words, he immediately stopped talking.

State-owned enterprises and national scientific research institutes have lost a lot of talents in recent years, and many people have either been poached by those foreign capital and private enterprises, or started their own businesses. He had retired for so many years, and there was nothing he could do about it, even if he was worried.

"This area is the five-axis linkage CNC machine tool research area, currently covers an area of 2,000 square meters, the same direction is heavy machine tools and ordinary machine tools. The main research in this area is currently focused on improving performance. For the four-axis linkage machine tool here, the old man didn't ask too much, and Deng Lanqing didn't introduce too much.

Five-axis is basically the integration of two-way four-axis linkage machine tools.

Otherwise, it would not be so easy to go from four-axis linkage to five-axis linkage.

The division of CNC machine tools in the world, the four-axis linkage above is a high-end machine tool, which is not unreasonable. And most of China's research institutes are stuck here. As long as the technology of four-axis linkage machine tool is solved, it will not take long to enter the field of five-axis.

Yunfei is reluctant to share the manufacturing technology of four-axis linkage for this reason.

"At present, many countries in the world have the manufacturing technology of five-axis linkage CNC machine tools, such as Spain, Italy, the manufacturing of five-axis linkage machining centers in small countries because of technical problems, the market is not very good, because the price of the international market has fallen, these were originally to attract some Latin American, Asian and European small production plants, which are basically facing the danger of bankruptcy......" Yun Fei saw the puzzled face of the old man, and explained.

Everyone knows the importance of these equipment, but it doesn't look much different from the four axes next to it, and the five axes in the heavy machine tool area should actually be said to be more accurate in terms of turning and milling in line with the machining center.

These small machines don't see anything when they're not machining.

"These are five-axis machining centers?" The old man has never seen what the five-axis machining center looks like, and there is no big difference between these and the equipment in the adjacent area, especially compared to the four-axis machining center, only a part of the accessories in the inside of the working area, naturally he is puzzled.

"These are just the five-axis machining centers in the research state, and they are all divided into various functional systems and sections. Only the five axes of the vertical and horizontal double spindle with a length of 5 meters, a width of 1.8 meters and a height of 1.6 meters are considered a system integration. This is a turn-mill machining ......center customized by the Duo Group for processing turbine shafts and turbine discs," Deng Lanqing pointed to the largest equipment in the house.

Jiuyi Research Institute has now begun to accept the research business of special equipment customization. There is no way to do this, the institute is carrying out more and more projects, but the funding supply is fundamental, and it can only do so.

"At present, our five-axis technology is not too mature, but it can meet most of the requirements of market users. The five-axis machining center we have researched is mainly a woodworking machine with the most users in the market, that is, a light five-axis linkage machine tool that pursues high precision and high processing efficiency, but cannot process large parts. The double customized five-axis is the first heavy-duty five-axis machining center we have studied...... "Deng Lanqing did not introduce the working principle of the five-axis to the old man, nor did he introduce the aspects they studied.

Even if she introduced it, the old man couldn't understand it.

As for the technicians who followed behind, no matter how much they wanted to listen to this detailed introduction, Deng Lanqing would not pay attention to them.

The old man originally made a special trip to see the five-axis linkage machining center that restricts the development of China's high-precision equipment manufacturing industry.

The five-axis, after the outer shield of the machine covers the inside, is no different from the three-axis. However, the workbench inside and the internal layout are so different that people who are not experts can't see it at all.

Each study area is marked with a yellow line, and even the old man cannot step into the yellow line area, but can only watch from the aisle outside. And there are not a lot of entities in it like the previous four axes and three axes, just some parts and system integration, and the most are the computers and researchers around these parts and system integration.

"Isn't Elder Sun here? What about people? "Sun Lin, this old man, should have appeared here at this time, but Yun Fei didn't see anyone at all.

There are some things, let Sun Lin explain, maybe it is easier. After all, Sun Lin is good at this, Deng Lanqing has a high IQ and talent, but he is not good at introducing people like the old man who don't know anything about five-axis machining centers. (To be continued......)

PS: Bow and thank Langhua 5555 for the generous reward of 10,000 coins, and thank you for the big monthly pass. Thanks to Crazy Piggy 2 big two monthly passes.