"Okay, Liang Ke, Yun Fei is my younger brother, not an outsider, put away your groomed professional introduction. Tell him the actual situation, otherwise, our biggest customer will have to find someone else in the future......" Hearing Liang Ke's official statement that the water could no longer be watered, Li Lu hurriedly interrupted.

Just kidding, if these nearly 200 people were all engineers like Liang Ke said, even if it was 10,000 yuan each, she would not package and sell them to Yun Fei. The state needs a large number of experienced senior engineers more than private factories. In addition, Yun Fei himself was born in the art of art, and he will definitely organize an examination for them before these old Maozi take up their posts, not only in theory, but also in various practical operations, when those workers who are already top skilled technicians, how can they show their level from the drawing design?

Besides, Yun Fei's requirements, the most important thing is a high-level skilled worker, 193 engineer, not that the factory is still under construction, and the guy with only a few million cash in his hand can eat.

"Uh......" As soon as Liang Ke said business, the whole person became serious, although in such an environment, it is not a good place to talk about work. Because she was so engrossed, she didn't see the corners of Yun Fei's mouth gradually curling at all. She believes that such a young hairy child can't tell the difference between a skilled worker and an engineer.

Anyway, this group of people is used to sell money, and the higher the level, the better they can sell for a good price, right? Most of the hundreds of other mechanics and engineers in the Pearl River Delta were taken away by the people who had originally ordered from Kamat, and the rest were sold by her for a high price. Their market is not only in Huadu, but also in the Special Economic Zone. Especially in electronics, biopharmaceuticals, and mechanical engineering.

"Okay, I'll be honest. Among them, there are only more than 20 engineers with qualifications, and most of the rest are skilled workers. The lowest is above the sixth level of work. Of course. There are only more than 20 people above the eighth level, and most of the rest are six or seven level ......" The boss's instructions, Liang Ke didn't understand it very much, but he had to tell the truth.

Now to tell the truth, the negotiations are at a disadvantage, the price has to be at least one-third less, you know, this is the first time that Kamat got from the Soviet Union is the most elite of the first people, if you can't sell it at a good price, isn't this a trip in vain?

Brothers have to settle accounts. This Yun Fei is related to his boss, no matter how you look at it, you can't see that there is a blood relationship.

"How many fitters are there above grade 8? Especially the assembly fitters! Yun Fei took another sip of tea and asked seriously at Liang Ke.

"I said Xiaoyun, why are you so serious, you scared Liang Ke. You said that you are a hairy child, learning from those old men all day long, and when it comes to serious people, you become serious, do you have to be serious. To be able to say these words? Li Lu took a sip of the tea that the tea boss had changed to the new tea bowl that had been specially made for her, while observing the situation of the two.

When I drank it in my mouth, I realized that this tea. Even the taste of the most common tea sold on the market cannot be compared. I'm thinking about such a bad tea, why there is no legendary taste. Yun Fei's question, a sense of superiority for ordinary people exuded a strong body, which frightened Liang Ke, who has worked in less than two months since graduation.

Inside the 9327 factory. There were only three grade 9 fitters, two in their fifties and one in their fifties. Yun Fei is not for design. The demand for technical engineers engaged in craftsmanship is far less urgent than the demand for fitters, especially assembly fitters.

The most important and critical part of the production of machine tools is the assembly link at the end of the day.

The parts and components produced, no matter how advanced the machine tools that produce them and how high the technical level of the workers are, can never reach the absolute limit. This is also the fact that no matter how demanding the design of the component is, there will be a tolerance range. Even parts with an accuracy class of IT0 will have a tolerance range of at least 0.0001mm or more.

The accuracy level of IT5 or above, the machine tools of this era, except for a few machine tools in Europe and the United States, can be processed, and the Chinese equipment of this era cannot be reached at all. Even if such equipment exists in Europe and the United States, it is necessary for the best skilled workers to produce it using super-precision machine tools.

The higher the processing level, the more difficult it is and the more sophisticated the equipment used. But the highest level of accuracy is often done by hand. In order to achieve a tolerance class of IT 4 or above, it is necessary to have manual means of precision grinding or super machining.

Yunfei is now going to produce, although it is an ordinary grade of processing machine tools, the tolerance level of parts with a relatively high degree of precision is in the range of IT5-IT7, and most of the parts are in IT8-IT10. However, he wants to make machine tools, the most core, the highest precision level of guide rails, the degree of precision grinding is enough for ordinary machining machine tools, but in order to use their own factory to produce machine tools, the precision level must be higher.

Because that's the legendary abstract industrial machine. In the mass production of machine tools, high-precision processing machine tools will achieve better results. This is especially true for those machines that are used for the most difficult post-finishing.

Fitters are divided into several relatively fine categories, sheet metal, maintenance, assembly of these three categories. Sheet metal fitters Yunfei can't be used now, and the maintenance fitters of the 9327 factory are enough, but the assembly fitters with wider uses and higher technical content are needed in large quantities.

As we all know, the accuracy of a machine tool depends not only on the machining accuracy of the parts that make up the machine tool, but also on the assembly relationship of each part. It is impossible to achieve the same size of each part in production, especially in batch generation, in order to make the service life of parts longer and maintenance more convenient, the interchangeability of parts is required.

The so-called interchangeability does not mean that all the accuracy of each part is consistent, but that their accuracy and dimensional error are controlled within a reasonable range according to the assembly relationship and accuracy level.

With good interchangeability of parts, we can ensure that the equipment can improve the generation efficiency in the process of assembly.

Ordinary metal cutting machine tools, belonging to the fifth level of absolute classification (absolute classification of machine tools, from high to low, there are one to six grades, the classification of grades, mainly depends on the accuracy range that the machine tool can process. With the continuous emergence of various high-level precision machine tools, the highest grade machine tools are constantly changing). Although the level is not high, the skills and experience requirements for assembly workers are quite high.

It can be said that the assembly accuracy determines the grade of the machine tool in a small range.

It takes several days for an assembly fitter to assemble a lathe or milling machine. If it's heavy equipment, several fitters have to work together for a few days.

"There are seven or eight eighth-level turners, but there are not many eighth-level fitters, only less than twenty." Liang Ke saw Yun Fei's hairy eyes, and while playing with the brand-new tea bowl in his hand, he lowered his head and whispered to answer Yun Fei's words.

"You are content, the territory of the Soviet Union is too big, the factory layout is widely distributed, and it is not bad to be able to bring in more than 20 workers above level 8 in a short period of time......" Li Lu saw Yun Fei's face disappointed, despised this goods, and pouted and said.

Yun Fei's expression was obviously a question of her ability to work. Although she is not a vain woman, how can she not be angry when she is looked down upon by a man she has a good impression of?

"I'm sorry, sister, it's me who is in a hurry......" Yun Fei saw Li Lu angry and hurriedly apologized.

He knew that the situation in the Soviet Union had not completely collapsed before the Soviet Union was declared to be dissolved, and although many factories had completely shut down, most of the workers were supported by the most basic living expenses issued by the state. As a last resort, none of these most basic workers, skilled workers and engineers, who had been brainwashed for decades and became the backbone of the entire Soviet Union's heavy industry and machine building, were reluctant to leave their homeland.

If it weren't for the fact that the relations between China and the Soviet Union had always been relatively good, and they were in the same ideological camp, no one would have wanted to come to China at all.

This is also after the collapse of the Soviet Union, countless skilled craftsmen in the Soviet Union are willing to live the most depressed life, and are not willing to go to those countries in Europe and the United States to get high wages.

Most of these workers are from Ukraine and Belarus. The main resources of the Soviet Union were to think about the major research institutes and factories in Russia. All along, the Soviet Union has been engaged in the development of Russia with the resources of the alliance, so the situation in the Soviet Union will deteriorate sharply after the international situation gradually stabilizes.

"Sister, inform the people over there, the engineers, you can slow down, but all kinds of skilled workers above level eight, especially assembly fitters, how many and how many I want. Also, the engineer in the materials, help me get some ......" Yun Fei saw that Li Lu had calmed down, and then said seriously to Li Lu.

"Xiaoyun, what do you want to do with so many senior workers in Soviet machinery?" Li Lu was very curious, Yun Fei was just planning to set up a machinery factory, was it necessary to go to such great lengths to go abroad to engage so many high-level skilled workers? Although there is also a shortage of such talents in China, but he is such a small factory, and there are so many ready-made production for guidance?

"I want to make a machine!" Yun Fei said heavily to Li Lu.

Li Lu stood up, walked to Yun Fei's side, touched Yun Fei's forehead, then shook his head, and then said to himself: "I don't have a fever......

Regarding Yun Fei's words, Li Lu was very unimpressed. The production of machine tools, especially without any foundation, Yun Fei is not looking for death? There are a lot of domestic production machine tool enterprises, the first machine tool factory in Northeast China, the first machine tool factory in the capital, the first machine tool factory in Qiqihar these long-standing enterprises not to mention, especially after the founding of the People's Republic of China in the establishment of countless machine tool production enterprises, now most of them are not very prosperous.

Yun Fei just relied on the more than 10 million in his hand and the little shares he spent, what is this not looking for death? (To be continued......)