"Secretary Xie, our boss really doesn't know where he went. You also know the situation of our company, where our boss goes, he won't greet anyone at all! Facing Xie Heping, who was full of dissatisfaction, Wang Zixin said with a wry smile.

The big boss of the cloud disappeared again.

The Guocheng Municipal Party Committee and Municipal Government came together to get some projects from Boss Yunda to develop Guocheng's GDP, but when they arrived, they found that no one knew where Boss Yunda had gone.

After Jiuyi Group acquired Sichuan Automobile, Sichuan Automobile became a heavy investment project in Rongcheng, and Yunfei needed to expand Sichuan Automobile, and the specific amount of land was not explained. And there was a dirt dispute between Yun Fei and the newcomer Zhou Laohu, and this matter could only be taken care of by their municipal party committee.

It's good at this time, they are ready to requisition land and relocate the factories around Sichuan Automobile, Yun Fei, the new head of Yun's Holdings, has disappeared again!

How can this not make Xie Heping, who has just become the number one, angry? This kid obviously doesn't give him face!

"Your entire group of companies is so big, there can't be no one who knows where he went, right? Also, he didn't say when he left, who is responsible for the company's affairs? Xie Heping also knew that it was useless to be angry with a new little girl.

But he was really in a hurry.

Zhou Laohu was constantly pulling Yun Fei's hind legs, even if Yun Fei ignored him, he was in full swing, and during this time, he was at odds with Xie Heping for the demolition of the few pieces of land in Yun Fei's hands in the east of the city.

"Secretary Xie, where is the boss, he doesn't say, we can't ask, right? As for who is responsible for the company's affairs, we don't know when he left. You also know that he doesn't go to the company to work seriously a few times a year...... "Where Yun Fei went, no one knows."

That night, Xiangyun Lao Dao said that he would teach him a set of exercises and could not pass it on. Let them go home, and follow Yun Fei to the Jinjiang Hotel, which has been upgraded to a five-star hotel a few years ago.

Yun Fei didn't show up for several days, Li Lu thought that Yun Fei was in the Economic Development Zone, and Wang Zixin thought that he went to Li Lu's side, so he didn't care at all.

However, after the people from Jinjiang Hotel called and asked the people from Jiuyi Group to drive their boss's car back, they knew that Yun Fei was actually missing again. And Yun Fei did not settle in Jinjiang Hotel that night......

Li Lu: They have long been accustomed to things like Yun Fei.

Xie Heping ended in vain, and the automobile factory project of Jiuyi Group is estimated to be out of action in a short period of time. Jiang Jianxing is busy with a large aircraft project in Shanghai at this time, and this project is basically Yun Fei's net worth and life, as Yun Fei's only relative. The most trusted person can't just let it go.

And the people on the Shanghai Stock Exchange are also looking for Yunfei.

"Old man, it is inevitable that our group company will go abroad and enter the international market. Moreover, we went to Iraq to set up a production plant, mainly for the oil equipment, and it is difficult for us to enter the European and American markets. But this is not the case in places like Iraq, Iran, Africa and South America, where Europe and the United States do not pay attention to them at all. Because they are poor, ......" Yun Fei has been grinding the old man to let him go abroad these days.

Just because he did not shy away from saying in front of the old man that the country was not suitable for his development, and he wanted to emigrate.

As a result, when Jiuyi Heavy Industry achieved results in technical research. The old man directly restricted him from leaving the country, even to Xiangjiang, but it was not okay! Because Xiangjiang and many countries are visas on arrival, as long as you have a visa from the Xiangjiang government. You can apply for a visa to many countries......

Although Lao Dao rarely goes out, he sees these things very clearly, and directly gives Yun Fei a bad idea. It's for him to take away the gaze that has been staring at him.

This qiē is caused by the large aircraft project, as long as the project is gradually faded in people's sight, the attention can be quickly diverted. The best thing is to enter the international market.

With the growth of the domestic economy and the rise of the automobile industry, the domestic demand for oil has soared, but China does not have many oil fields outside, especially in the Middle East, and China is far less cheap to buy than Europe and the United States.

Iraq has a very good relationship with the 91 Group, and although China has exported to them the Hongqi series of anti-aircraft missiles and some heavy equipment technology that China does not need, these have been obtained through Yun Fei's mediation.

Saddam Hussein is actually quite good, Iraq has always invited the Jiuyi Group to invest in them, mainly in the manufacture and design of some petroleum equipment, Yun Fei did not think about this problem at all before, but now to divert the attention of the domestic focus on them, they can only make big moves abroad.

What China lacks most is what can attract the attention of the Chinese people, and thus divert the country's attention.

Yun Fei immediately thought of Iraq.

There are still four full years left for the United States to attack Iraq, and if he helps Saddam's old goods resist the attack of the US imperialists, then Iraq will become deeper and hotter, and together with Afghanistan, the United States will be dragged down from the world's first throne.

The subprime mortgage crisis is basically because the United States is in trouble in Afghanistan and Iraq, spending trillions of dollars in finances, and as a result, the new Oyama government in the United States has to withdraw its troops even if it does not achieve the kind of gains they envisioned before the war.

"Petroleum equipment, it can be produced in China and then exported, so that it can bring a lot of foreign exchange to our country in a year......" The old man really doesn't want to let Yun Fei out.

And this time Yun Fei has been out for so long.

Now in March, he will not come back until the old man goes to Rongcheng in June to visit the subsidiaries of Yunshi Holdings.

For such a long time, God knows what this kid will do out out there.

You must know that Yun Fei, this kid, is regarded as a thorn in the side and a thorn in the flesh by foreign anti-China forces.

During the anti-Chinese riots in Indonesia in May last year, this kid openly clamored in front of the media to set up a Chinese revenge fund, but the Chinese forces in the world responded enthusiastically, and a group of new generation entrepreneurs in China also stood up.

The safety of the Chinese people in the country as a whole has increased by more than one notch.

It is also precisely because of this Chinese revenge fund that the business activities of the Chinese in the international arena are more restricted.

"Old man, this can not be said like this, in the domestic export is certainly able to bring a lot of foreign exchange, but this competitiveness is not much advantage, you look at the Taiwanese, people in our domestic investment and construction of factories, and then compete with their local enterprises...... "Yun Fei's favorite now anyway is to talk about the CNC machine tool factory established by the Taiwanese in the mainland.

Who called these guys to start saying that Yun Fei is a technology obtained from abroad by the old Mao Zi who has transformed into capitalism......

Keep saying that theirs is domestic......

This Yun Fei is scorched on the outside and tender on the inside.

"Besides, I'm going abroad to inspect the investment environment, and it's not like I won't come back if I go out, my family business is all in China......" Yun Fei naturally knew what the old man was worried about.

He made money at home, and as a result, he took the money abroad to help other countries develop, which naturally did not work.

"Are you going to go to Ukraine first? And then to Iraq? The old man didn't say anything more, but asked about Yun Fei's itinerary.

"The plan is like this, from China to Ukraine, and then to Germany, Philip will definitely have to go again, and then transfer to Iraq, these countries in Africa also have to go, and then South America for a walk, and finally return to China......" These itineraries were all considered by Yun Fei before he came.

After all, if you want to participate in the Hannover Machine Tool Exhibition, you must go to Germany to negotiate with the exhibition management about the booth or something. Anyway, China's machine tools are already qualified to gain a place in the world market.

Didn't you watch the Taiwanese participate in every session?

"This year's European Machine Tool Exhibition, it doesn't seem to be in Germany, right?" The old man asked with a frown.

"This year's exhibition will be in Paris, France, and Hanroway, Germany, will not be until 2001. When I went to Germany, I mainly talked to Siemens...... "Yun Fei naturally knows that this year's European machine tool exhibition is not in Germany, but in France.

European machine tool exhibition, than the United States machine tool exhibition and Japan machine tool exhibition level is much higher, although CNC machine tools are invented in the United States, in Germany and Japan to develop rapidly, but the German talent in this area, is more than any country can match.

Moreover, the small principalities of Europe, such as Switzerland, Italy, Spain, France, and even Luxembourg, are very capable of this, not to mention the United Kingdom.

Switzerland, in particular, is not even worse than Germany when it comes to precision machine tools.

Many machinery companies in Germany use Swiss precision machine tools and super precision machine tools.

A lot of precision equipment in China's aerospace industry comes from the small country of Switzerland, and people from the outside world don't know about it at all. Ordinary lathes in China are generally 0.02-0.05mm, while the Swiss direct is 0.005-0.001mm accuracy range.

In this respect, the Swiss are unmatched by any other country.

And the Germans are also happy to give this market to the Swiss, after all, the Swiss do not compete with them for the market of CNC machine tools, not to mention, the Germans are mainly making systems. In any case, Switzerland has to use their system for CNC machine tools.

Moreover, since this exhibition began in 1951 and then opened to the world in 1957, this exhibition has been held in three cities in turn: Paris, France, Hannover, Germany, and Milan, Italy.

Only by gaining a position in Europe can we gain a firm foothold in the US and Japanese markets. (To be continued......)

PS: Thanks to Crazy Piggy 2 for the big monthly pass.