Yang Guang was stunned by Yun Fei's prospect planning. Ten machining centers, the price alone has to be more than five million! Although Qingfeng Machinery is developing very vigorously today, can the boss have such great courage?

The development of the CNC workshop, Yang Guang and these people are all in the eyes, and they are increasing equipment almost every month! And almost all of these equipment entered Qingfeng Machinery Factory in the complaint of the boss Wang Qingfeng. Wang Qingfeng, who was not very enterprising, could agree with Yun Fei's plan?

"Master, don't worry, I understand what to do." Yun Fei's words have already been said to this extent, how can Yang Guang not understand. Most of the skilled CNC technicians in the entire workshop were originally trained by Yun Fei, and when he came, he was already starting the mode of old people leading newcomers.

The reason why he didn't let an apprentice like Ye Beichun, who had no foundation, operate on the machine, was because his training model came from the factory where he used to work.

Because of his original mindset, Yang Guang has formulated a detailed training plan for his apprentices. For the new apprentices, he asked the skilled workers with these apprentices to start with the theory first, and wait until the apprentices have almost learned the theory before they start to touch the machine tools.

That is to say, within a month of Yang Guang's management of the CNC workshop, almost all the new apprentices who entered the CNC workshop did not work and received wages in vain.

Private enterprises are different from state-owned enterprises, and the purpose of enterprises is to make profits, and it is simply impossible to spend a lot of time, energy and money on training apprentices. After all, in this era, with the rapid growth of the domestic economy, the development of the entire machinery industry is like a blowout, and countless new factories have been established. In the past few years, many private factories have spent a lot of energy to train their skilled workers, but they did not expect that most of the workers have left their old owners under the temptation of money.

Qingfeng Machinery originally hooked up with a lot of workers from other factories outside, and for those workers who did not have the slightest sense of belonging to the enterprise and were too mobile, Yun Fei also had no good feelings.

It is precisely because of this that Wang Qingfeng is particularly worried that the skilled workers trained by his factory will be seduced away by other factories, and his factory will make wedding dresses for others at that time. Yun Fei also has such concerns, so except for the first batch, the workers in the back only teach basic operations and no longer train programming.

In the original world of Yunfei, many mechanical processing factories, especially in CNC machining, divide workers in great detail, and each factory only needs to ensure the stability of a few programming and process design technicians, and there is no attention to front-line operators.

The main job of the front-line operator is to clamp the parts to be processed on the Wang CNC machine tool, and then press the green start button, and wait for the parts to be processed and then take them off. Repeating these few actions every day is basically equivalent to a cheap robot. Especially in factories that make high-volume products, one worker drives several machine tools. This kind of work can be done by anyone who does not have a foundation in CNC or machining, after a short period of training.

Therefore, no factory will care about the departure of such front-line workers without the slightest technical content. Yunfei's current planning for Qingfeng Machinery's CNC workshop is basically operated in accordance with this model.

Yang Guang has not been in Qingfeng Machinery for a long time, so he is not very clear about this. In his philosophy, the workers who operate the machine tool must be very proficient in the machine tool, otherwise it will be a severe test for the service life of the machine tool. Especially for these precision CNC machine tools, if you hit the spindle a little, maybe the entire spindle will be scrapped.

The reason why Qingfeng Machinery's CNC workshop has developed so rapidly is mainly because Yunfei, a person from later generations, knows the prospects of this industry. Out of blind trust in Yun Fei, although every time he buys CNC machine tools, Wang Qingfeng has to complain for several days, but after completing the statistics at the end of the month, he saw the number on his company's account soaring, and praised himself from time to time.

Although Yang Guang explained what he should do, Yun Fei told Yang Guang in detail about the classification system for CNC workshop operators in order to liberate him from the tedious work of front-line machine operators more quickly.

Yun Fei means that the top two technicians are Yang Guang and Wu Zhongda, who are responsible for the daily management of the entire factory, understand the needs of customers, and hand over to other departments; The second level is the process engineer who compiles the process of the parts that need to be produced according to the drawings and the preparation of the CNC machining process program; The third level is responsible for the debugging of CNC machine tool processing programs, completing basic operations such as tool setting, sharpening tools, first piece trial cutting, ensuring the processing quality of parts, and repairing worn tools in the processing process; The fourth level is the most popular ordinary operator.

Hearing Yun Fei's description, Yang Guang's mouth opened widely.

In this way, the entire CNC workshop does not need too many skilled workers to run. Because the main work of these skilled workers is to debug the program prepared by the process engineer on the upper layer, so as to liberate them from the first-line production, and do not have to wait for a machine tool to be processed and installed with another one. And those workers who are engaged in front-line operations take over the work of these skilled technicians to guard the machine tools.

According to the operation of Yunfei's model, not only will the processing capacity of the entire factory increase a lot, but the demand for skilled technicians will also be reduced to the maximum extent, and the cost will also be reduced a lot, after all, the salary of a skilled technician is at least twice that of a general worker who knows nothing.

With more than 10 CNC machine tools of Qingfeng Machinery now, if two shifts are used, only four skilled workers are needed.

"Master, if this is the case, we only need two technical workers in each class, isn't there too many technical workers in the CNC workshop?" Thinking about the benefits of subdividing workers and jobs in this way, Yang Guang suddenly became distressed. After all, the CNC technicians trained by Yunfei are far less than four.

"This doesn't count as you think. After all, although our factory now says that there are many CNC machine tools, there are also many types. Another thing is that although our factory has a lot of business for large-scale parts processing, there is also a lot of business for complex high-precision parts in small batches of single pieces. If there are too few skilled workers, we can only give up these businesses that require high personal quality of workers. These workers are the foundation for our development and growth in the future, of course, there will definitely be a lot of them, so we must choose those more stable workers for training, don't end up, just trained, poached by other factories, even if you want to cry at that time, you can't cry. Yun Fei explained to Yang Guang.

Now Qingfeng machinery has not yet reached the point where it will do whatever it takes to save costs. After all, CNC machining in private factories is just emerging, and the profits of CNC machining business are still very high, and there is almost no competition. Otherwise, Qingfeng Machinery would not have developed from two kinds of three dilapidated second-hand CNC machine tools to more than five kinds of more than ten sets in more than half a year.

In Yun Fei's plan, before he left Qingfeng Machinery, the number of EDM wire cutting machine tools in the entire factory was more than 30, after all, the processing efficiency of this kind of machine tool was not very high, but the price was cheap. Many parts of Qingfeng Machinery need this kind of machine tool that can only process the plane. CNC lathes are the most important, after all, a large number of Qingfeng machinery's business is rotary body parts, but there are dozens of ordinary lathes in ordinary machining workshops, so the main task of Qingfeng machinery's CNC lathes is to fine turn large quantities of parts, as well as to process more complex single small batch parts, CNC lathes are planned to reach 20 units before the end of next year.

Due to the high price of machining centers, the price of one machining center is almost worth three CNC milling machines. The entire Pearl River Delta region is dominated by light industry, and the equipment manufacturing industry cannot be compared with those heavy industry areas, so Yunfei's plan will reach ten CNC milling machines. The machining center, which is the inevitable trend of the development of the CNC machining industry in the next 20 years, although the price is expensive, so Yunfei still formulated a plan to increase to five.

These plans were all planned by Yun Feili, and he planned to hand them over to Ye Qingfeng when he summarized them at the end of the year. He himself knows that the equipment in his plan alone will require more funds than the total value of Qingfeng machinery and equipment. Yun Fei doesn't know whether Wang Qingfeng will agree with his plan, anyway, the CNC system of the later generations that he copied has been largely completed, and after the Spring Festival, he will go to Huadu CNC line, and when the time comes, as long as it goes well, it will be the time for him to leave Qingfeng Machinery.

This plan has not yet been formed into a written document, but it only has a prototype in his heart.

The reason why Yun Fei wanted to submit it to Wang Qingfeng without being sure was that this plan was just to repay Wang Qingfeng for taking him in.

Out of his understanding of Wang Qingfeng, Yun Fei does not feel that he will have much development after leaving Qingfeng Machinery, but even so, with the processing capacity of Qingfeng Machinery now, as long as Wang Qingfeng is not too stupid, he can ensure that he will gain a foothold in the era of fierce competition in the future.

Since God has given himself the opportunity to come to this era, Yun Fei is unwilling to waste this opportunity, and wants to change the situation that high-end CNC machine tools are monopolized and blackmailed by foreigners in later generations.

After all, a big country cannot produce high-end precision CNC machine tools, which is a shame for the entire machinery industry. Yun Fei wants to make his domestic counterparts in this world no longer shameful, and he must start working hard now.

For mobile phone users, please read it on m.biquge.info.