"Miss Tanalia, this is the leader of our National Defense Science, Technology and Technology Industry Committee, and they came to your laboratory this time to help your laboratory solve the problem of chip industrialization for the thirty-two people you have researched." Li Lu saw that Tanaria didn't even care about Yun Fei, the boss, and was worried that Li Zhongwei and his party would have a bad face, so she stepped forward and whispered in Tanaria's ear.

"Really?" Tanalia, who was originally unhappy to be disturbed, heard the words of Li Lu, a beautiful girl she had only met a few days ago, and her face immediately turned cloudy and clear.

Now on days like these, she's just had enough.

When they first arrived in China, they were fine, but the young boss threw them a set of design drawings and stopped caring about their research. But I didn't expect that the good days did not pass for a few months, especially in these months, after the CNC lathes produced by Jiuyi Heavy Industry were launched, more than 20 researchers in their project team, and half of the personnel went to do the production that was originally just an ordinary operator!

We are researchers, not operators on the production line! Tanalia also doesn't know how many times she has protested to Yun Fei, the young boss, they entered Jiuyi Heavy Industry and signed a fifteen-year sales contract with Jiuyi Heavy Industry, but they still have a lot of research projects that they brought from the Soviet Union, and those projects, although the final results will become owned by Jiuyi Heavy Industry, but they don't care.

Now that the nature of their work has shifted from research to production, how can they not be angry?

In the face of the protest of the Soviets represented by Tanalia, Yun Fei just told her that if they did not do these productions, the products produced by Jiuyi Heavy Industry would not be able to gain a firm foothold in the market. At the same time, Yun Fei threatens Tanalia with the suspension of research on the Soviets' personal projects, forcing them to engage in research on the side. On the one hand, it becomes the fate of front-line operators to carry out production.

Of course, Yun Fei also promised them that as long as the industrial production process of chips is solved, there will be a special production workshop to produce these chips. At the same time, Yunfei also promised that after the economic conditions of Jiuyi Heavy Industry improved and profits were generated, it would increase investment in the electronic research laboratory.

Otherwise. When Yun Fei brought Li Lu here, Tanaria would not have heard Yun Fei say that Li Lu might become one of their bosses, so she put down the work at hand, introduced the situation in the research room to Li Lu in detail, and even put down her body to explain various basic issues to Li Lu, a little white.

"This is General Li Zhongwei, and behind him are some experts who are very authoritative in the field of electronics." Li Lu introduced the identities of Li Zhongwei and others who came to inspect to Tanalia.

"Hello, Mr. General, my name is Tanalia, and I am the person in charge of this laboratory......" Tanaria stretched out her hand to Li Zhongwei.

Li Zhongwei couldn't help but sigh when he saw that there was actually a Soviet woman in charge of this laboratory. Seemingly. The biggest constraint on the development of private enterprises in China is the lack of talents, especially high-end talents in various fields, otherwise Yun Fei is such an important project. Nor will it be put into the hands of a woman.

"Ms. Tanalia, you speak Chinese very well, please tell us about the equipment and conditions needed for the industrialization of the chips in your hands." Li Zhongwei held Tanalia's hand and shook it gently.

People who came to visit with Li Zhongwei. However, several of them went to study in the Soviet Union, and they originally wanted to behave well, but they didn't expect it. This woman from the Soviet Union was able to speak fluent Chinese. Where did they know that this woman, from learning Chinese to now, has only been less than a year.

"If our chips want to achieve industrial production, the first problem is the material problem. China is currently unable to produce a large number of silicon, the main material of chips, so in order to achieve industrial production, this difficulty is the first problem that needs to be solved. Now the largest silicon materials come from the United States, and if China can produce 32-bit control chips, they will definitely restrict the export of silicon materials to China. In that case, the entire Chinese electronic and electrical market will be wiped out......" Tanalia told of the situation in China.

The industrial production of silicon, an advanced material, was a problem that had not been completely solved in the Soviet Union, not to mention China.

"Lady Tanalia, you don't have to think about the material yet. As long as you can solve the industrialization process of your chips, no matter how much you need, we can provide it! Li Zhongwei said proudly to this Tanaria.

Unexpectedly, the National Academy of Sciences has just studied the successful industrial production process of silicon materials, and encountered such a good market, so that it is not difficult for high-end scientific and technological products produced in China to be exported to Europe and the United States. Before he came, someone told him that foreign countries are still researching sixteen-bit chips!

"Since there is no problem with the materials, then what we need is equipment. These equipment, in fact, can be produced in China, but they need to be imitated according to those foreign assembly lines, and then transformed into assembly lines that can produce 32-bit chips. Among them, large-scale particle injection machine, high-efficiency lithography machine and large-scale PMC machine are the most critical equipment, as long as these kinds of equipment can be solved, some other less important equipment, with our current technical ability, can be solved, but it takes a lot of time. Tanaria despised the big talker, but she couldn't expose it.

Chinese pay attention to face, but they deeply understand, especially after coming to China for more than half a year, they have a deep understanding and experience of this.

If China really solves the industrial production of high-end materials such as silicon materials, how can it not be seen in the newspapers at all?

Under the leadership of Tanalia, several people visited the various projects in this electronic laboratory again, especially the research on microcomputers in the laboratory of Zhilu Dao, and the group was extremely shocked.

"What's in this? The 32-bit chip we use for industrial control is a super microcomputer, but it is not as powerful as a microcomputer. Yun Feiru said to the crowd.

"Young man, don't you know the truth that you can't chew too much? Let's put our energy on the research and development of CNC machine tools. You are a chip, a mobile phone, and a computer, and the few resources in your hands have become more scattered, which is not beautiful. For Jiuyi Heavy Industry, which has just set foot in the machine tool industry, and has not even learned, it is in a hurry to learn to run or even learn to fly, Li Zhongwei warned Yun Fei earnestly.

Regarding Li Zhongwei's admonition to the old general, Yun Fei was noncommittal.

"General, advanced CNC machine tools, must have a more powerful control chip. Can foreign advanced chips be exported to China? If this is the case, we in China are afraid that we have already researched advanced CNC machine tools, and it will not be until now, only we Jiuyi Heavy Industry can produce mid-range CNC lathes! It's not that I don't want to specialize, it's the situation in our country that makes me have to rely on myself for everything. I also don't want to put my limited funds and energy into unlimited research. For this, it is an eternal pain in Yun Fei's heart.

Even in his world, China's high-end chips still rely on imports.

China is at the forefront of the world in the research of large-scale computers, but it is far behind in the world in the field of microcomputers. Most of China's domestic chip production plants are from abroad. Will there be the first-class techniques that they use when they sell the techniques sold abroad to the Chinese? Even if there are second-rate technologies sold to the Chinese, the development of China's various high-precision and cutting-edge industries will not be the same.

After visiting this laboratory, Li Zhongwei and his entourage also walked around the mechanical research and testing workshop on the bottom floor.

Yun Fei didn't expect that Li Zhongwei and his entourage were acquaintances with Sun Lin and Situ Heyun. So this avoided the embarrassment of him introducing the situation to the general's entourage, who he could barely look at directly.

"Okay, yes, if we continue like this, sooner or later we will be able to produce a real four-axis or even five-axis machining center by ourselves!" At that time, we don't have to look at the faces of those foreigners. If you are wronged, you have to accompany the smiling face, for fear that they will not sell it to us! When he heard Sun Lin say that they are now solving the problem of toolbox positioning in the machining center, especially when he understands what the benefits will be after solving this problem, Li Zhongwei laughed hajkily.

The problem of toolholder positioning of the machining center is the threshold between the CNC milling machine and the machining center. As long as this threshold is crossed, it is possible to produce a machining center that can automatically change tools under program control. In that way, the machining accuracy of the parts will be guaranteed, and the production efficiency will also be improved a lot.

"Xiaoyun, if the country plans to cooperate with your Jiuyi Heavy Industry, what kind of conditions do you have?" After visiting the experimental building of Jiuyi Heavy Industry, Yun Fei saw that there was still about half an hour before the lunch time, so he took a group of people to visit the CNC machine tool assembly workshop of Jiuyi Heavy Industry.

Others saw a workshop full of CNC machine tools that were being assembled and being debugged after assembly, and scattered to study the principle of how these automatic machine tools controlled by CNC code programs worked, Li Zhongwei did not go, and asked Yun Fei in a low voice. (To be continued......)