Peat!

The second artillery has been reloaded!

This is the second artillery!

China's most mysterious Strategic Missile Forces!

Almost all high-end heavy strategic equipment belongs to this unit under management!

This army was built with money. Isn't the state tilting its strategic focus to the economic sphere? Where did the huge sums of money come from to give the entire army a complete rearmament? It's not scientific at all!

What new gadgets will the Second Artillery be equipped with this time?

Is it the Great Wave series or the Dongfeng series?

Julang that thing is too rubbish, it is estimated to be the Dongfeng series, but I don't know if the road is type A of the Dongfeng series, or type B, or type C?

The Second Artillery Corps is the country's strategic missile force, and what kind of weapons of mass destruction are equipped will not be revealed until the military parade to celebrate the 50 th anniversary of the country at the beginning of the century.

China's most deterrent strategic missile, Dongfeng-31, has an effective range of 8,600 kilometers, an accuracy range of 100 meters, and a nuclear warhead, which can cover most of the cities on the west coast of the United States!

Could it be that all the money that the military has saved over the years has been smashed into this outfit change?

Since the reform and opening up, the military has engaged in a lot of side businesses, and Kamat is just one of them, and over the years, Camat alone has provided hundreds of millions of funds for the military!

Of course, these strategic-level big guys are very money-burning. One without adding internal fuel, just some shells and engines, will cost tens of millions of dollars! Of course, if you remove the profit and various additional costs, millions can be produced.

"Thousands of kilometers? Boy, you still don't know how to do this! Li Zhongwei said solemnly to Yun Fei.

This is a real military secret.

This is the case in any country, when there is no accident, everyone thinks that they can afford it, if something really happens. Li Zhongwei, the military boss, also couldn't bear it. This is the country's top military secret!

The mystery of the Second Artillery Corps will not be unveiled until the 50-year National Day military parade that is about to enter the 21 st century.

China's Dongfeng series also appeared in the eyes of the people of the world at that time!

"Cut, if you don't know the road, you don't know the road. Just cover it like a baby, don't you look at the old Maozi's Topol-MD missile with a range of 14,000 kilometers? Do people have secrets? Where are people deployed, any corner of the earth is within their attack range, don't you dare to argue with Lao Maozi, who is now so dilapidated that she can't be dilapidated? Yun Fei pursed his lips.

Many things in China are treated as a baby bump by themselves.

If there is a strategic missile with a range that can cover the whole world, and it is hidden and tucked, others will not treat it as a matter at all. If you let people know, China has this thing. When shouting at China, can you still ignore it?

Didn't you see that when China's strategic missiles did not appear in the eyes of the world, Uncle Ohm blew up the Chinese consulate?

"Do you really plan to export all the equipment you produce now, as well as the equipment that is still in the development stage, to these countries?" In order to divert Yun Fei's attention and prevent this kid from asking about some national military secrets, Li Zhongwei instantly changed the topic.

"If someone buys it, let's buy it. We're not an advanced thing! "The equipment developed was originally for sale.

Someone is waving a lot of money to buy it, how can Jiuyi Heavy Industry not sell it?

Isn't this that you can't get along with yourself?

"Ladies and gentlemen. This is our machining center assembly workshop. According to the plan, within two years, we Jiuyi Heavy Industry will build an annual production capacity of 2,000 processing centers, and the annual turnover will exceed one billion yuan...... "With a group of international friends of different colors to visit the newly established constant temperature assembly workshop.

While visiting. On the one hand, he explained the various assembly links to these international friends who have only heard of high-end CNC machine tools and have not seen them.

Listening to their interpreters tell them about the various processes, these international friends did not show much serious listening expressions, and they were most concerned about the processing capacity of these equipment.

Due to the small size of the country. With a sparse population and a weak industrial base, their machinery manufacturing capacity is not very strong, while CNC equipment is the embodiment of a country's comprehensive national strength. It not only requires a deep industrial foundation, but also requires electronics, electrical, computer and many other industry technologies.

They know their own business, and they know how to develop such high-end manufacturing equipment independently, even if they can do it, it is impossible to form large-scale production in a short time.

In particular, the eight-year Iran-Iraq war in the 80s, which was once one of the world's top military powers, not only caused the loss of their high-end combat power, but also set their industry and economy back for decades.

The ability of machinery manufacturing can not be improved in just a few years and decades.

In particular, the training of skilled workers, which is the most important in machinery manufacturing, requires more time and money to cultivate.

Not to mention the manufacture of aircraft and tanks, at least, the guns have to be made themselves!

Just because they can't make it themselves, they can't make anything, and after eight years of fighting the Iran-Iraq war, Iran and Iraq, two rich countries that had tens of billions of dollars in deposits before the war, owed hundreds of billions of arms debts after the war ended!

In particular, the United States, in this eight-year war, wantonly sold all kinds of arms and weapons and equipment to both sides of the war, making a windfall. Even the economic crisis that arose in the seventies because of oil was recovered by exporting weapons and equipment to these two countries.

If it weren't for the outbreak of the Iran-Contra incident, whether it was Iran or Iraq, it wouldn't have woken up at all, and it turned out that the United States had no peace of mind from the beginning.

They are doing it, they are consuming weapons and equipment, but their treasury has been emptied by Lao Mi in the end!

How can they not be annoyed!

It is precisely because of this that they feel that they have been deceived, and they will abandon their previous suspicions and prepare to cooperate in the development of their own industries, especially military industries.

Originally, they wanted to buy CNC equipment from the United States that could greatly improve their industrial level, but they were rejected by the United States.

Uncle Ohm said, buy weapons and equipment, no problem, in addition to atomic bombs or other super weapons, aircraft, tanks, artillery, and even Scud missiles, you can sell them, but if you want to buy a large number of equipment to manufacture these weapons and equipment, no!

There is nothing wrong with a few units.

But what good is just a few?

How many CNC lathes, in addition to processing the connection parts of the shells, can do?

Even the engine parts of a short-range missile like a Scud cannot be machined!

Of course, traditional machinery and equipment can also be processed, don't you see that our Iranian people are engaged in Islamic movements? The people of Iraq are busy helping Saddam Hussein to extract oil!

Where can anyone spend decades improving their machining operations?

"This is the mechanical test workshop of our Jiuyi Research Institute. Almost all the CNC machine tools produced by Jiuyi Heavy Industry are finalized from this laboratory! These big guys who are being studied here are the heavy-duty CNC lathes jointly developed by our Jiuyi Heavy Industry and our country's largest heavy-duty general car manufacturer, Harr Heavy Industries, which are mainly used to process large long-shaft parts, such as the shells of large missiles...... "Zhilu Dao These goods are not very interested in the production workshop, and Wu Zhongda, who has long been instructed by Yun Fei, took these foreign soil buns into the mechanical experimental workshop of Jiuyi Heavy Industry. The heavy CNC car that is about to be developed was introduced to the defense ministers of these countries that are bent on manufacturing high-end weapons and equipment.

"Manager Wu, I don't know what the price of these heavy-duty CNC cars developed by your company is?" After Wu Zhongda just said that such a CNC car could be used to process the shell of a large missile, several people immediately asked about the price through the translator around them at the same time.

"These equipment are ordered by some production bases of our domestic aerospace system, because they are of no use in the civilian market, mainly for the manufacture of large military equipment, so the price is a little expensive...... Wu Zhongda looked at these international friends with shining-eyed eyes.

In this way, Yun Fei explained it to him in advance.

The design of a strategic-level intercontinental missile is very difficult, and there are many key technologies in it, and it is impossible to design it without accumulating experience over a long period of time. Even if you can design it, you have to have that manufacturing ability.

Missiles do not mean that the more fuel they contain, the farther they can fly.

Sometimes, the fuel is so loaded that it can't even reach half the design range because of its own weight.

However, tactical-level missiles, if they are only missiles with a range of tens of kilometers or even hundreds of kilometers, can be designed by countries with a little ability.

What they lack is only the processing equipment and materials for the production of these missiles!

"How much exactly?" Everyone had an expression of not bad money, which made their faces embarrassed, but the corners of Wu Zhongda's mouth, who had already laughed in his heart, cracked, and he took several deep breaths to suppress his desire to laugh.

"Due to the inability to produce on a large scale, if the production quantity of our heavy-duty CNC car is less than 100 units, the cost of each unit will exceed 2.8 million yuan!" Wu Zhongda said in embarrassment.

For Yun Fei's ruthlessness, Wu Zhongda has already seen it.

These heavy-duty CNC equipment, in the international market, can not see the shadow at all.

"Manager Wu, I don't know how long it will take for your company's CNC equipment to be mass-produced?" (To be continued......)

PS: Thank you for the big monthly pass if you can run.

The keyboard of the gourd was picked out by the girl, and it was not installed for more than an hour, so it can only be used, and it is not updated tonight, and the gourd will try to update fifteen thousand tomorrow......